Set-WdsInstallImage
Set-WdsInstallImage
Modifies the properties of an install image.
Syntaxe
Parameter Set: AutoStart
Set-WdsInstallImage -ImageName <String> -Multicast [-AsJob] [-CimSession <CimSession[]> ] [-ClientCount <UInt32> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-StartTime <DateTime> ] [-ThrottleLimit <Int32> ] [-TransmissionName <String> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: ManualStart
Set-WdsInstallImage -ImageName <String> -ManualStart -Multicast [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-TransmissionName <String> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: SingleImage
Set-WdsInstallImage -ImageName <String> [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: StartTransmission
Set-WdsInstallImage -ImageName <String> -StartScheduledCast [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Parameter Set: StopTransmission
Set-WdsInstallImage -ImageName <String> -StopMulticastTransmission [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-Force] [-ImageGroup <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-OverwriteUnattend] [-ThrottleLimit <Int32> ] [-UnattendFile <String> ] [-UserFilter <String> ] [ <CommonParameters>]
Description détaillée
The Set-WdsInstallImage cmdlet modifies the properties of an install image in the Windows Deployment Services image store. Use this cmdlet to do any of the following:
-- Change the name of an install image.
-- Change the description of an install image.
-- Set the display order of an install image in the image menu.
-- Specify an answer file for unattended setup of an install image.
-- Set permissions for users or groups to access the image.
When you work with multicast transmissions that use an install image as content, you can:
-- Create and name an AutoCast transmission.
-- Create and name a ScheduledCast transmission which begins when a preset number of clients are ready to start, at a specific time, or both.
-- Create a manually started ScheduledCast transmission.
-- Start a ScheduledCast transmission.
-- Stop a multicast transmission in progress, and then either disconnect clients immediately, or allow them to finish, but not allow any new clients to join.
An AutoCast transmission is a multicast transmission. When a client requests an install image, the multicast transmission begins. Clients that request the same image are joined to the multicast transmission.
A ScheduledCast transmission is a multicast transmission. When a specified number of clients request an image, or a specified time of day is reached, the multicast transmission begins. If you do not specify either of these conditions, you must manually start the transmission.
Specify the install image by using the image name and image group name. If the image name and image group name do not uniquely identify the install image, specify the file name.
Paramètres
-AsJob
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-CimSession<CimSession[]>
Exécute l’applet de commande dans une session à distance ou sur un ordinateur distant. Entrez un nom d’ordinateur ou un objet de session, comme la sortie d’une applet de commande New-CimSession ou Get-CimSession. La valeur par défaut est la session active sur l’ordinateur local.
Alias |
Session |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-ClientCount<UInt32>
Specifies the number of clients that must connect to a transmission. If you also specify the MulticastTransmission parameter, the client count specifies the number of clients that must connect to the ScheduledCast transmission in order for it to begin. Use the StartScheduledCast parameter to begin a transmission before reaching the client count. If you specify the ClientCount parameter and the StartTime parameter, the transmission begins when either a sufficient number of clients have connected or at the time specified by the StartTime parameter.
You may not specify this parameter together with the ManualStart parameter.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-DisplayOrder<UInt32>
Specifies the order in which images appear in the boot menu on Pre-Boot Execution Environment (PXE) clients. The menu lists the boot images in ascending order, smallest number to largest number.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-FileName<String>
Specifies a file name. This is the file name of the install image. Use this parameter to specify the file name for the install image if the install image name does not uniquely identify the image.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-Force
Indicates that the cmdlet disconnects any clients currently connected to the multicast transmission. If you do not specify this parameter for an AutoCast transmission, existing clients finish receiving the content, but no new clients join.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-ImageGroup<String>
Specifies the name of an image group. This image group contains the image to modify.. If you do not specify an image group, and only one image group exists on the server, the cmdlet uses that image group by default. If more than one image group exists on the server, you must specify the image group.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-ImageName<String>
Specifies the name of an image. This is the name of the image to modify.
Alias |
none |
Obligatoire ? |
true |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
True (ByPropertyName) |
Accepter les caractères génériques ? |
false |
-ManualStart
Indicates that the transmission uses a manual start. If you also specify the MulticastTransmission parameter, the cmdlet creates a ScheduledCast transmission that does not begin until a StartScheduledCast command is given.
Alias |
none |
Obligatoire ? |
true |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-Multicast
Indicates that the cmdlet enables an AutoCast transmission on the image. If you do not specify a name by using the TransmissionName parameter, the multicast transmission uses the image name
Alias |
none |
Obligatoire ? |
true |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-NewDescription<String>
Specifies a new description for the install image to create in the set operation.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-NewImageName<String>
Specifies a new name for the image file to create in the set operation.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-OverwriteUnattend
Indicates that the cmdlet can overwrite an existing answer file. If you specify the UnattendFile parameter, the cmdlet overwrites an existing answer file associated with the image.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-StartScheduledCast
Indicates that the cmdlet enables and begins a ScheduledCast transmission on the image. If there are no clients connected to the transmission, the transmission fails to start.
Alias |
none |
Obligatoire ? |
true |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-StartTime<DateTime>
Specifies a day and time, in MM/DD/YYYY.hh:mm:ss format, that denotes the start time. If you specify the MulticastTransmission parameter, this parameter denotes the time the ScheduledCast transmission begins. The StartScheduledCast command can start a transmission before reaching the client count. If you specify both the StartTime parameter and the ClientCount parameter, the transmission begins when either a sufficient number of clients connect, or the time specified in this parameter is reached. Do not specify this parameter together with the ManualStart parameter.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-StopMulticastTransmission
Indicates that Windows Deployment Services stop the multicast transmission of the image. If you specify the Force parameter, the cmdlet disconnects any clients connected to the multicast transmission. If you do not specify the Force parameter, and the transmission is autocast, current clients finish receiving the content, but no additional clients can join the transmission.
Alias |
none |
Obligatoire ? |
true |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-ThrottleLimit<Int32>
Spécifie le nombre maximal d’opérations simultanées qui peuvent être établies pour exécuter cette applet de commande. Si ce paramètre est omis ou si la valeur 0
est entrée, Windows PowerShell ® calcule une limitation optimale pour l’applet de commande en fonction du nombre d’applets de commande CIM qui s’exécutent sur l’ordinateur. La limitation s’applique seulement à l’applet de commande actuelle, et non pas à la session ni à l’ordinateur.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-TransmissionName<String>
Specifies a name for the multicast transmission.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-UnattendFile<String>
Specifies the full path for the answer file associated with the image.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
-UserFilter<String>
Specifies the access controls on the image, in Security Descriptor Definition Language (SDDL) format. To restrict access to the file resources, and access to all images within an image group, set access controls on the image group itself.
Alias |
none |
Obligatoire ? |
false |
Position ? |
named |
Valeur par défaut |
none |
Accepter l’entrée de pipeline ? |
false |
Accepter les caractères génériques ? |
false |
<CommonParameters>
Cette applet de commande prend en charge les paramètres courants : -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer et -OutVariable. Pour plus d’informations, consultez about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Entrées
Le type d’entrée correspond au type des objets que vous pouvez transmettre à l’applet de commande.
Sorties
Le type de sortie est le type des objets émis par l’applet de commande.
- Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsInstallImage
Exemples
Example 1: Modify an install image
This command modifies an install image for automatic installation.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -DisplayOrder 0 -NewImageName "Fabrikam Latest with LOB v2.0 apps" -UnattendFile "D:\images\unattend\FabrikamwLOB.xml" -OverwriteUnattend -UserFilter "O:BAG:DUD:(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)(A;OICI;0x1200a9;;;AU)(A;OICI;FA;;;S-1-5-80-1688844526-3235337491-1375791646-891369040-3692469510)"
Example 2: Modify an install image for multicast transmission
This command modifies an install image for multicast transmission.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -TransmissionName "Fabrikam Latest AutoCast"
Example 3: Modify start time and client count conditions for an install image
This command modifies an install image by using the ClientCount and StartTime parameters.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -ClientCount 50 -StartTime 2014/12/01:11:00 -TransmissionName "Fabrikam Latest ScheduledCast with automatic start"
Example 4: Modify an install image for manual start
This command modifies an install image by using the ManualStart parameter.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -Multicast -ManualStart -TransmissionName "Fabrikam Latest ScheduledCast with manual start"
Example 5: Modify an install image to start
This command modifies an install image to begin a scheduled transmission.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -StartScheduledCast
Example 6: Modify an install image to stop a transmission
This command stops a multicast transmission for an install image.
PS C:\> Set-WdsInstallImage -ImageName "Fabrikam Latest with LOB apps" -ImageGroup "Fabrikam Latest Images" -FileName "install-3.wim" -StopMulticastTransmission