Rename-NetFirewallRule

Rename-NetFirewallRule

Renames a single IPsec rule.

Syntax

Parameter Set: ByAssociatedNetFirewallAddressFilter
Rename-NetFirewallRule -AssociatedNetFirewallAddressFilter <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallApplicationFilter
Rename-NetFirewallRule -AssociatedNetFirewallApplicationFilter <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallInterfaceFilter
Rename-NetFirewallRule -AssociatedNetFirewallInterfaceFilter <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallInterfaceTypeFilter
Rename-NetFirewallRule -AssociatedNetFirewallInterfaceTypeFilter <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallPortFilter
Rename-NetFirewallRule -AssociatedNetFirewallPortFilter <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallProfile
Rename-NetFirewallRule -AssociatedNetFirewallProfile <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallSecurityFilter
Rename-NetFirewallRule -AssociatedNetFirewallSecurityFilter <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByAssociatedNetFirewallServiceFilter
Rename-NetFirewallRule -AssociatedNetFirewallServiceFilter <CimInstance> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByDisplayName
Rename-NetFirewallRule -DisplayName <String[]> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByName
Rename-NetFirewallRule [-Name] <String[]> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByQuery
Rename-NetFirewallRule -NewName <String> [-Action <Action[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-Description <String[]> ] [-Direction <Direction[]> ] [-DisplayGroup <String[]> ] [-EdgeTraversalPolicy <EdgeTraversal[]> ] [-Enabled <Enabled[]> ] [-GPOSession <String> ] [-Group <String[]> ] [-LocalOnlyMapping <Boolean[]> ] [-LooseSourceMapping <Boolean[]> ] [-Owner <String[]> ] [-PassThru] [-PolicyStore <String> ] [-PolicyStoreSource <String[]> ] [-PolicyStoreSourceType <PolicyStoreType[]> ] [-PrimaryStatus <PrimaryStatus[]> ] [-Status <String[]> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: GetAll
Rename-NetFirewallRule -NewName <String> [-All] [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-TracePolicyStore] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Rename-NetFirewallRule -InputObject <CimInstance[]> -NewName <String> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Detailed Description

The Rename-NetFirewallRule cmdlet renames an existing firewall rule. When creating a rule, if the Name parameter is not specified, then a random GUID is used. This cmdlet specifies a friendly and descriptive rule name. Note: The newly specified name, using the NewName parameter, must still be unique since it identifies a single rule object on the computer.

This cmdlet gets one or more firewall rules to be renamed with the Name parameter (default), the DisplayName parameter, rule properties, or by associated filters or objects. The Name parameter value for the resulting query is replaced by the specified NewName parameter value. Note: Only one firewall can be renamed at a time when copying to the same policy store. This is because only a single firewall can use the unique identifier, or name, as specified by the NewName parameter.

To modify the localized DisplayName parameter, run the Set-NetFirewallRule cmdlet with the NewDisplayName parameter.

The names are unique identifiers for rules, similar to file names. Each name must be unique within a given policy store. If rules in multiple GPOs have the same name, then one will overwrite the other based upon GPO precedence. If a rule from a GPO has the same name as a rule from the PersistentStore, then the rule from the GPO will overwrite the local rule. This can be used to create overlapping policies, where the same rule is placed in multiple GPOs, and if they are both applied to a computer, then the overlapping parts of the policies will only be created once. For this reason, two rules should only have the same name if the rules perform the same function. For instance, if the built-in local firewall rules (like Core Networking, or File & Printer Sharing rules) are copied to a domain GPO, then the rules will override any local versions of those rules. However, if different GPOs specify different scopes with the same rule names, then the rules will become much harder to effectively manage.

Parameters

-Action<Action[]>

Specifies that matching firewall rules of the indicated action are renamed.
Gets the firewall rules that have the corresponding action value.
This parameter specifies the action to take on traffic that matches this rule.
The acceptable values for this parameter are: Allow or Block.
-- Allow: Network packets that match all of the criteria specified in this rule are permitted through the firewall.
-- Block: Network packets that match all of the criteria specified in this rule are dropped by the firewall.
The default value is Allow.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-All

Indicates that all of the firewall rules within the specified policy store are renamed.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-AsJob

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-AssociatedNetFirewallAddressFilter<CimInstance>

Gets the firewall rules that are associated with the given address filter to be renamed.
A NetFirewallAddressFilter object represents the address conditions associated with a rule. See the Get-NetFirewallAddressFilter cmdlet for more information.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-AssociatedNetFirewallApplicationFilter<CimInstance>

Gets the firewall rules that are associated with the given application filter to be renamed.
A NetFirewallApplicationFilter object represents the applications associated with a rule. See the Get-NetFirewallApplicationFilter cmdlet for more information.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-AssociatedNetFirewallInterfaceFilter<CimInstance>

Gets the firewall rules that are associated with the given interface filter to be renamed.
A NetFirewallInterfaceFilter object represents the interface conditions associated with a rule. See the Get-NetFirewallInterfaceFilter cmdlet for more information.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-AssociatedNetFirewallInterfaceTypeFilter<CimInstance>

Gets the firewall rules that are associated with the given interface type filter to be renamed.
A NetFirewallInterfaceTypeFilter object represents the interface conditions associated with a rule. See the Get-NetFirewallInterfaceTypeFilter cmdlet for more information.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-AssociatedNetFirewallPortFilter<CimInstance>

Gets the firewall rules that are associated with the given port filter to be renamed.
A NetFirewallPortFilter object represents the port conditions associated with a rule. See the Get-NetFirewallPortFilter cmdlet for more information.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-AssociatedNetFirewallProfile<CimInstance>

Gets the firewall rules that are associated with the given firewall profile type to be renamed.
A NetFirewallProfile object represents the profile conditions associated with a rule. See the Get-NetFirewallProfile cmdlet for more information.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-AssociatedNetFirewallSecurityFilter<CimInstance>

Gets the firewall rules that are associated with the given security filter to be renamed.
A NetFirewallSecurityFilter object represents the security conditions associated with a rule. See the Get-NetFirewallSecurityFilter cmdlet for more information. The security conditions include the Authentication, Encryption, LocalUser, RemoteUser, and RemoteMachine parameters.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-AssociatedNetFirewallServiceFilter<CimInstance>

Gets the firewall rules that are associated with the given service filter to be renamed.
A NetFirewallServiceFilter object represents the profile conditions associated with a rule. See the Get-NetFirewallServiceFilter cmdlet for more information.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-CimSession<CimSession[]>

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Aliases	Session
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Description<String[]>

Specifies that matching firewall rules of the indicated description are renamed. Wildcard characters are accepted.
This parameter provides information about the firewall rule. This parameter specifies the localized, user-facing description of the IPsec rule.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Direction<Direction[]>

Specifies that matching firewall rules of the indicated direction are renamed.
This parameter specifies which direction of traffic to match with this rule.
The acceptable values for this parameter are: Inbound or Outbound.
The default value is Inbound.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-DisplayGroup<String[]>

Specifies that only matching firewall rules of the indicated group association are renamed. Wildcard characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a localizable string, then the Group parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetFirewallRule cmdlet, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is a good practice to specify the Group parameter value with a universal and world-ready indirect @FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetFirewallRule cmdlet, but can be modified using dot-notation and the Set-NetFirewallRule cmdlet.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-DisplayName<String[]>

Specifies that only matching firewall rules of the indicated display name are renamed. Wildcard characters are accepted.
Specifies the localized, user-facing name of the firewall rule being created. When creating a rule this parameter is required. This parameter value is locale-dependent. If the object is not modified, this parameter value may change in certain circumstances. When writing scripts in multi-lingual environments, the Name parameter should be used instead, where the default value is a randomly assigned value. Note: This parameter cannot be set to All.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-EdgeTraversalPolicy<EdgeTraversal[]>

Specifies that matching firewall rules of the indicated edge traversal policy are renamed.
This parameter specifies how this firewall rule will handle edge traversal cases. Edge traversal allows the computer to accept unsolicited inbound packets that have passed through an edge device, such as a network address translation (NAT) router or firewall. This option applies to inbound rules only.
The acceptable values for this parameter are: Block, Allow, DeferToUser, or DeferToApp
-- Block: Prevents applications from receiving unsolicited traffic from the Internet through a NAT edge device.
-- Allow: Allows applications to receive unsolicited traffic directly from the Internet through a NAT edge device.
-- DeferToUser: Allows the user to decide whether to allow unsolicited traffic from the Internet through a NAT edge device when an application requests it.
-- DeferToApp: Allows each application to determine whether to allow unsolicited traffic from the Internet through a NAT edge device.
-- The default value is Block.
Note: The DeferToApp and DeferToUser options are only valid for computers running , , and Windows Server® 2012.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Enabled<Enabled[]>

Specifies that matching firewall rules of the indicated state are renamed.
This parameter specifies that the rule object is administratively enabled or administratively disabled. The acceptable values for this parameter are:
-- True: Specifies the rule is currently enabled.
-- False: Specifies the rule is currently disabled. A disabled rule will not actively modify computer behavior, but the management construct still exists on the computer so it can be re-enabled.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-GPOSession<String>

Targets the network GPO from which to retrieve the rules to be renamed.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Group<String[]>

Specifies that only matching firewall rules of the indicated group association are renamed. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then this parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetFirewallRule cmdlets, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is good practice to specify this parameter value with a universal and world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetFirewallRule cmdlet, but can be modified using dot-notation and the Set-NetFirewallRule cmdlet.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-InputObject<CimInstance[]>

Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	True (ByValue)
Accept Wildcard Characters?	false

-LocalOnlyMapping<Boolean[]>

Indicates that matching firewall rules of the indicated value are renamed.
This parameter specifies the firewall rules for local only mapping, which describes whether a packet must pass through a local address on the way to the destination.
Non-TCP traffic is session-less. Windows Firewall authorizes traffic per session, not per packet, for performance reasons. Generally, non-TCP sessions are inferred by checking the following fields: local address, remote address, protocol, local port, and remote port.
If this parameter is set to True, then the remote address and port will be ignored when inferring remote sessions. Sessions will be grouped based on local address, protocol, and local port.
This is similar to the LooseSourceMapping parameter, but performs better in cases where the traffic does not need to be filtered by remote address. This could improve performance on heavy server workloads where UDP requests come from dynamic client ports. For instance, Teredo relay servers.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-LooseSourceMapping<Boolean[]>

Indicates that matching firewall rules of the indicated value are renamed.
This parameter specifies the firewall rules for loose source mapping, which describes whether a packet can have a non-local source address when being forwarded to a destination.
If this parameter is set to True, then the rule accepts packets incoming from a host other than the one to which the packets were sent. This parameter applies only to UDP protocol traffic.
The default value is False.

Aliases	LSM
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Name<String[]>

Specifies that only matching firewall rules of the indicated name are renamed. Wildcard characters are accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. GPOs can have precedence. So if an administrator has a different or more specific rule with the same name in a higher-precedence GPO, then it overrides other rules that exist.
The default value is a randomly assigned value.
When the defaults for main mode encryption need to overridden, specify the customized parameters and set this parameter, making it the new default setting for encryption.

Aliases	ID
Required?	true
Position?	1
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-NewName<String>

Specifies the new name for one or more firewall rules.

Aliases	none
Required?	true
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Owner<String[]>

Specifies that matching firewall rules of the indicated owner are renamed.
This parameter specifies the owner of the firewall rule, represented as an SDDL string. All Windows Store applications that require network traffic create network isolation rules (normally through installing via the Store), where the user that installed the application is the owner. This parameter specifies that only network packets that are authenticated as coming from or going to an owner identified in the list of accounts (SID) match this rule.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-PolicyStore<String>

Targets the policy store from which to retrieve the rules to be renamed.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ –PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ –PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server® 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetFirewallRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with the Copy-NetFirewallRule cmdlet or with the New-NetFirewallRule cmdlet.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-PolicyStoreSource<String[]>

Specifies that firewall rules matching the indicated policy store source are renamed.
This parameter contains a path to the policy store where the rule originated if the object is retrieved from the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
The monitoring output from this parameter is not completely compatible with the PolicyStore parameter. This parameter value cannot always be passed into the PolicyStore parameter. Domain GPOs are one example in which this parameter contains only the GPO name, not the domain name.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-PolicyStoreSourceType<PolicyStoreType[]>

Specifies that firewall rules that match the indicated policy store source type are renamed.
This parameter describes the type of policy store where the rule originated if the object is retrieved from the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated and should not be modified.
The acceptable values for this parameter are:
-- Local: The object originates from the local store.
-- GroupPolicy: The object originates from a GPO.
-- Dynamic: The object originates from the local runtime state. This policy store name is not valid for use in cmdlets, but may appear when monitoring active policy.
-- Generated: The object was generated automatically. This policy store name is not valid for use in cmdlets, but may appear when monitoring active policy.
-- Hardcoded: The object was hard-coded. This policy store name is not valid for use in cmdlets, but may appear when monitoring active policy.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-PrimaryStatus<PrimaryStatus[]>

Specifies that firewall rules that match the indicated primary status are renamed.
This parameter specifies the overall status of the rule.
-- OK: Specifies that the rule will work as specified.
-- Degraded: Specifies that one or more parts of the rule will not be enforced.
-- Error: Specifies that the computer is unable to use the rule at all.
See the Status and StatusCode fields of the object for more detailed status information.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Status<String[]>

Specifies that firewall rules that match the indicated status are renamed.
This parameter describes the status message for the specified status code value. The status code is a numerical value that indicates any syntax, parsing, or runtime errors in the rule or set. This parameter value should not be modified.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-ThrottleLimit<Int32>

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-TracePolicyStore

Indicates that the firewall rules that match the indicated policy store are renamed.
This parameter specifies that the name of the source GPO is set to the PolicyStoreSource parameter value.

Aliases	none
Required?	false
Position?	named
Default Value	none
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-Confirm

Prompts you for confirmation before running the cmdlet.

Required?	false
Position?	named
Default Value	false
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Required?	false
Position?	named
Default Value	false
Accept Pipeline Input?	false
Accept Wildcard Characters?	false

<CommonParameters>

This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see    about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetAddressFilter

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetApplicationFilter

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetFirewallProfile

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetFirewallRule

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetInterfaceFilter

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetInterfaceTypeFilter

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetNetworkLayerSecurityFilter

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetProtocolPortFilter

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetServiceFilter

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

The output type is the type of the objects that the cmdlet emits.

• None

Examples

EXAMPLE 1

This example renames a firewall rule so that the identifier is descriptive and user friendly.

PS C:\> Rename-NetFirewallRule –Name "{ed8384a9-a78b-4d0d-8f3d-eb5615edb4a0}" -NewName "Contoso-NETDIS-UPnPHost-Out-TCP-Active"

Related topics

Copy-NetFirewallRule

Disable-NetFirewallRule

Enable-NetFirewallRule

Get-NetFirewallAddressFilter

Get-NetFirewallApplicationFilter

Get-NetFirewallInterfaceFilter

Get-NetFirewallInterfaceTypeFilter

Get-NetFirewallPortFilter

Get-NetFirewallProfile

Get-NetFirewallSecurityFilter

Get-NetFirewallServiceFilter

Get-NetFirewallRule

New-NetFirewallRule

Open-NetGPO

Remove-NetFirewallRule

Save-NetGPO

Set-NetFirewallRule

Show-NetFirewallRule

New-GPO