Partager via


List<T>.Capacity Property

Microsoft Silverlight will reach end of support after October 2021. Learn more.

Gets or sets the total number of elements the internal data structure can hold without resizing.

Namespace:  System.Collections.Generic
Assembly:  mscorlib (in mscorlib.dll)

Syntax

'Declaration
Public Property Capacity As Integer
public int Capacity { get; set; }

Property Value

Type: System.Int32
The number of elements that the List<T> can contain before resizing is required.

Exceptions

Exception Condition
ArgumentOutOfRangeException

Capacity is set to a value that is less than Count.

OutOfMemoryException

There is not enough memory available on the system.

Remarks

Capacity is the number of elements that the List<T> can store before resizing is required, while Count is the number of elements that are actually in the List<T>.

Capacity is always greater than or equal to Count. If Count exceeds Capacity while adding elements, the capacity is increased by automatically reallocating the internal array before copying the old elements and adding the new elements.

The capacity can be decreased by calling the TrimExcess method or by setting the Capacity property explicitly. When the value of Capacity is set explicitly, the internal array is also reallocated to accommodate the specified capacity, and all the elements are copied.

Retrieving the value of this property is an O(1) operation; setting the property is an O(n) operation, where n is the new capacity.

Examples

The following code example shows the Capacity property at several points in the life of a list. The default constructor is used to create a list of strings with a capacity of 0, and the Capacity property is displayed to demonstrate this. After the Add method has been used to add several items, the items are listed, and then the Capacity property is displayed again, along with the Count property, to show that the capacity has been increased as needed.

The Capacity property is displayed again after the TrimExcess method is used to reduce the capacity to match the count. Finally, the Clear method is used to remove all items from the list, and the Capacity and Count properties are displayed again.

Imports System.Collections.Generic

Public Class Example

   Public Shared Sub Demo(ByVal outputBlock As System.Windows.Controls.TextBlock)

      Dim dinosaurs As New List(Of String)

      outputBlock.Text &= String.Format(vbLf & "Capacity: {0}", dinosaurs.Capacity) & vbCrLf

      dinosaurs.Add("Tyrannosaurus")
      dinosaurs.Add("Amargasaurus")
      dinosaurs.Add("Mamenchisaurus")
      dinosaurs.Add("Deinonychus")
      dinosaurs.Add("Compsognathus")

      outputBlock.Text &= vbCrLf
      For Each dinosaur As String In dinosaurs
         outputBlock.Text &= dinosaur & vbCrLf
      Next

      outputBlock.Text &= String.Format(vbLf & "Capacity: {0}", dinosaurs.Capacity) & vbCrLf
      outputBlock.Text &= String.Format("Count: {0}", dinosaurs.Count) & vbCrLf

      outputBlock.Text &= vbLf & String.Format("Contains(""Deinonychus"": {0}", _
          dinosaurs.Contains("Deinonychus")) & vbCrLf

      outputBlock.Text &= String.Format(vbLf & "Insert(2, ""Compsognathus"")") & vbCrLf
      dinosaurs.Insert(2, "Compsognathus")

      outputBlock.Text &= vbCrLf
      For Each dinosaur As String In dinosaurs
         outputBlock.Text &= dinosaur & vbCrLf
      Next

      outputBlock.Text &= String.Format(vbLf & "dinosaurs(3): {0}", dinosaurs(3)) & vbCrLf

      outputBlock.Text &= vbLf & "Remove(""Compsognathus"")" & vbCrLf
      dinosaurs.Remove("Compsognathus")

      outputBlock.Text &= vbCrLf
      For Each dinosaur As String In dinosaurs
         outputBlock.Text &= dinosaur & vbCrLf
      Next

      dinosaurs.TrimExcess()
      outputBlock.Text &= vbLf & "TrimExcess()" & vbCrLf
      outputBlock.Text &= String.Format("Capacity: {0}", dinosaurs.Capacity) & vbCrLf
      outputBlock.Text &= String.Format("Count: {0}", dinosaurs.Count) & vbCrLf

      dinosaurs.Clear()
      outputBlock.Text &= vbLf & "Clear()" & vbCrLf
      outputBlock.Text &= String.Format("Capacity: {0}", dinosaurs.Capacity) & vbCrLf
      outputBlock.Text &= String.Format("Count: {0}", dinosaurs.Count) & vbCrLf
   End Sub
End Class

' This code example produces the following output:
'
'Capacity: 0
'
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'Capacity: 8
'Count: 5
'
'Contains("Deinonychus"): True
'
'Insert(2, "Compsognathus")
'
'Tyrannosaurus
'Amargasaurus
'Compsognathus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'dinosaurs(3): Mamenchisaurus
'
'Remove("Compsognathus")
'
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'TrimExcess()
'Capacity: 5
'Count: 5
'
'Clear()
'Capacity: 5
'Count: 0
using System;
using System.Collections.Generic;

public class Example
{
   public static void Demo(System.Windows.Controls.TextBlock outputBlock)
   {
      List<string> dinosaurs = new List<string>();

      outputBlock.Text += String.Format("\nCapacity: {0}", dinosaurs.Capacity) + "\n";

      dinosaurs.Add("Tyrannosaurus");
      dinosaurs.Add("Amargasaurus");
      dinosaurs.Add("Mamenchisaurus");
      dinosaurs.Add("Deinonychus");
      dinosaurs.Add("Compsognathus");

      outputBlock.Text += "\n";
      foreach (string dinosaur in dinosaurs)
      {
         outputBlock.Text += dinosaur + "\n";
      }

      outputBlock.Text += String.Format("\nCapacity: {0}", dinosaurs.Capacity) + "\n";
      outputBlock.Text += String.Format("Count: {0}", dinosaurs.Count) + "\n";

      outputBlock.Text += String.Format("\nContains(\"Deinonychus\"): {0}",
          dinosaurs.Contains("Deinonychus")) + "\n";

      outputBlock.Text += String.Format("\nInsert(2, \"Compsognathus\")") + "\n";
      dinosaurs.Insert(2, "Compsognathus");

      outputBlock.Text += "\n";
      foreach (string dinosaur in dinosaurs)
      {
         outputBlock.Text += dinosaur + "\n";
      }

      outputBlock.Text += String.Format("\ndinosaurs[3]: {0}", dinosaurs[3]) + "\n";

      outputBlock.Text += "\nRemove(\"Compsognathus\")" + "\n";
      dinosaurs.Remove("Compsognathus");

      outputBlock.Text += "\n";
      foreach (string dinosaur in dinosaurs)
      {
         outputBlock.Text += dinosaur + "\n";
      }

      dinosaurs.TrimExcess();
      outputBlock.Text += "\nTrimExcess()" + "\n";
      outputBlock.Text += String.Format("Capacity: {0}", dinosaurs.Capacity) + "\n";
      outputBlock.Text += String.Format("Count: {0}", dinosaurs.Count) + "\n";

      dinosaurs.Clear();
      outputBlock.Text += "\nClear()" + "\n";
      outputBlock.Text += String.Format("Capacity: {0}", dinosaurs.Capacity) + "\n";
      outputBlock.Text += String.Format("Count: {0}", dinosaurs.Count) + "\n";
   }
}

/* This code example produces the following output:

Capacity: 0

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

Capacity: 8
Count: 5

Contains("Deinonychus"): True

Insert(2, "Compsognathus")

Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus

dinosaurs[3]: Mamenchisaurus

Remove("Compsognathus")

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

TrimExcess()
Capacity: 5
Count: 5

Clear()
Capacity: 5
Count: 0
 */

Version Information

Silverlight

Supported in: 5, 4, 3

Silverlight for Windows Phone

Supported in: Windows Phone OS 7.1, Windows Phone OS 7.0

XNA Framework

Supported in: Xbox 360, Windows Phone OS 7.0

Platforms

For a list of the operating systems and browsers that are supported by Silverlight, see Supported Operating Systems and Browsers.