Inscription à la récupération d’application
Cette section fournit des détails sur l’implémentation d’une fonctionnalité de récupération dans votre application. Vous devez envisager d’implémenter cette fonctionnalité pour gérer les cas suivants :
Récupération lorsqu’une application rencontre une exception non prise en charge ou cesse de répondre
Empêche la perte de données lorsque l’application cesse de fonctionner de manière inattendue.
-
Permet à un utilisateur de récupérer en toute transparence les données d’application lorsque l’application est fermée en raison d’une installation de mise à jour logicielle (ce qui peut se produire sans donner à l’utilisateur la possibilité d’enregistrer des données).
Récupération lorsqu’une application rencontre une exception non prise en charge ou cesse de répondre
Pour inscrire un rappel de récupération, appelez la fonction RegisterApplicationRecoveryCallback . Rapport d'erreurs Windows (WER) appelle votre rappel de récupération avant la fermeture de l’application en raison d’une exception non prise en charge ou de l’application qui ne répond pas.
Vous utilisez le rappel de récupération pour essayer d’enregistrer les données et les informations d’état avant la fin de l’application. Vous pouvez ensuite utiliser les données et les informations d’état enregistrées lors du redémarrage de l’application.
Pendant le processus de récupération, vous devez appeler la fonction ApplicationRecoveryInProgress dans l’intervalle ping spécifié ; dans le cas contraire, le processus de récupération est terminé. L’appel de ApplicationRecoveryInProgress permet à WER de savoir que vous récupérez toujours activement des données. Une fois le processus de récupération terminé, appelez la fonction ApplicationRecoveryFinished . Notez que la fonction ApplicationRecoveryFinished doit être le dernier appel que vous effectuez avant de quitter, car la fonction arrête immédiatement l’application.
Vous devez envisager d’enregistrer régulièrement des copies temporaires des données et des informations d’état pendant le cours normal du processus d’application. L’enregistrement périodique des données peut faire gagner du temps dans le processus de récupération.
Enregistrement des données et de l’état de l’application lors de la fermeture de l’application en raison d’une mise à jour logicielle
Si une application Windows peut être mise à jour, l’application doit également traiter les messages WM_QUERYENDSESSION et WM_ENDSESSION . Le programme d’installation envoie ces messages lorsque le programme d’installation a besoin de l’arrêt de l’application pour terminer l’installation ou lorsqu’un redémarrage est nécessaire pour terminer l’installation. Notez que dans ce cas, l’application a moins de temps pour effectuer la récupération. Par exemple, l’application doit répondre à chaque message dans un délai de cinq secondes.
Pour les applications console qui peuvent être mises à jour, vous devez envisager de gérer CTRL_C_EVENT notifications. Pour obtenir un exemple, consultez Inscription pour le redémarrage de l’application. Le programme d’installation envoie cette notification lorsqu’il a besoin que l’application s’arrête pour terminer la mise à jour. L’application dispose de 30 secondes pour gérer la notification.
L’exemple suivant montre comment s’inscrire à la récupération, une implémentation de rappel de récupération simple et comment traiter les messages WM_QUERYENDSESSION et WM_ENDSESSION .
#define UNICODE
#include <windows.h>
#include <stdio.h>
#include <commctrl.h>
#include <strsafe.h>
#include "recover.h"
#pragma comment(lib, "comctl32.lib") // For common controls
#pragma comment(lib, "user32.lib")
#define RESTART_SWITCH L"/restart"
#define RESTART_SWITCH_LEN 8
HINSTANCE g_hinst;
HWND g_hwnd;
HWND g_hwndStatus;
DWORD g_dwRecordId = 0;
// Prototypes
BOOL CreateWindows(void);
LRESULT CALLBACK WndProc(HWND, UINT, WPARAM, LPARAM);
BOOL InitInstance(LPWSTR pwsCommandLine);
DWORD WINAPI Recover(PVOID pContext);
BOOL IsRestartSelected(void);
// A simple example to show how to use application recovery in a window application.
// For simplicity, the state information (record ID) is passed as part of the command line.
int APIENTRY wWinMain(
HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPWSTR lpCmdLine,
int nCmdShow)
{
MSG msg;
g_hinst = hInstance;
if (!CreateWindows())
{
return 0;
}
if (!InitInstance(lpCmdLine))
{
return 0;
}
ShowWindow(g_hwnd, nCmdShow);
UpdateWindow(g_hwnd);
while (GetMessage(&msg, NULL, 0, 0))
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
return (int)msg.wParam;
}
// Initialize this instance of the application.
BOOL InitInstance(LPWSTR pwsCommandLine)
{
BOOL fSuccess = TRUE;
BOOL fIsRestart = FALSE;
DWORD len = 0;
LPWSTR pch = NULL;
WCHAR wsStatusMsg[128];
//WCHAR wsCommandLine[RESTART_MAX_CMD_LINE];
if (len = wcslen(pwsCommandLine))
{
// Get the restart info from the command line. The command line is
// of the form, /restart -r:<RecordId>. The application
// is being restarted if the first argument is /restart.
if (!wcsncmp(RESTART_SWITCH, pwsCommandLine, RESTART_SWITCH_LEN))
{
fIsRestart = TRUE;
pch = pwsCommandLine + len;
while (*--pch != ':' && pch >= pwsCommandLine)
;
g_dwRecordId = _wtoi(pch+1);
}
}
if (fIsRestart)
{
// TODO: Use the record ID to initialize the application.
RtlZeroMemory(wsStatusMsg, sizeof(wsStatusMsg));
StringCchPrintf(wsStatusMsg, 128, L"Initializing after restart (record ID is %lu)", g_dwRecordId);
SetWindowText(g_hwndStatus, wsStatusMsg);
}
else
{
// This is not a restart, so initialize the application accordingly.
SetWindowText(g_hwndStatus, L"Initializing application");
}
// You could call the RegisterApplicationRestart and
// RegisterApplicationRecovery functions here to register for
// application recovery and restart, but this example uses menu
// items to toggle these features on and off for testing purposes.
//// Register for restart. The command line is updated in the recovery callback.
//RtlZeroMemory(wsCommandLine, sizeof(wsCommandLine));
//StringCchPrintf(wsCommandLine, RESTART_MAX_CMD_LINE, L"/restart -r:%lu", dwRecordId);
//hr = RegisterApplicationRestart(wsCommandLine, RESTART_NO_PATCH | RESTART_NO_REBOOT);
//if (FAILED(hr))
//{
// // Not failing because the registration failed.
// goto cleanup;
//}
//// Register the callback that handles recovery when the application
//// encounters an unhandled exception or becomes unresponsive.
//hr = RegisterApplicationRecoveryCallback(Recover, g_dwRecordId, RECOVERY_DEFAULT_PING_INTERVAL, 0);
//if (FAILED(hr))
//{
// // Not failing initialization because the registration failed.
// // Consider calling UnregisterApplicationRestart if you must
// // have the latest state information.
// goto cleanup;
//}
//cleanup:
return fSuccess;
}
BOOL CreateWindows(void)
{
BOOL fSuccess = TRUE;
WNDCLASSEX wc;
ATOM atom;
INITCOMMONCONTROLSEX initctrls;
RECT rc;
ZeroMemory(&wc, sizeof(wc));
wc.cbSize = sizeof(wc);
wc.lpfnWndProc = WndProc;
wc.hInstance = g_hinst;
wc.lpszClassName = L"MainWClass";
wc.hbrBackground = (HBRUSH)(COLOR_WINDOW+1);
wc.hCursor = LoadCursor(NULL, IDC_ARROW);
wc.lpszMenuName = MAKEINTRESOURCE(IDC_RECOVER);
atom = RegisterClassEx(&wc);
g_hwnd = CreateWindowEx(0,
L"MainWClass",
L"Testing Application Restart and Recovery",
WS_OVERLAPPEDWINDOW | WS_CLIPCHILDREN,
CW_USEDEFAULT, CW_USEDEFAULT,
390, 165,
NULL,
NULL,
g_hinst,
NULL);
if (NULL == g_hwnd)
{
fSuccess = FALSE;
goto cleanup;
}
initctrls.dwSize = sizeof(initctrls);
initctrls.dwICC = ICC_BAR_CLASSES;
InitCommonControlsEx(&initctrls);
GetClientRect(g_hwnd, &rc);
g_hwndStatus = CreateWindowEx(0, STATUSCLASSNAME, NULL,
WS_CHILD | WS_BORDER | WS_VISIBLE,
rc.left, rc.bottom - 20, rc.right, 20,
g_hwnd, NULL, g_hinst, NULL);
if (NULL == g_hwndStatus)
{
fSuccess = FALSE;
}
cleanup:
return fSuccess;
}
LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam)
{
int wmId, wmEvent;
PAINTSTRUCT ps;
HDC hdc;
HMENU hMenu;
MENUITEMINFO miInfo;
BOOL bChecked = FALSE;
HRESULT hr = S_OK;
int* p = NULL;
ULONG error = ERROR_SUCCESS;
WCHAR wsCommandLine[RESTART_MAX_CMD_LINE];
switch (message)
{
case WM_COMMAND:
wmId = LOWORD(wParam);
wmEvent = HIWORD(wParam);
// Parse the menu selections:
switch (wmId)
{
// Causes an access violation to test the restart feature,
// if restart is checked. The application must be running
// for at least 60 before it can be restarted if an access
// violation occurs.
case ID_FILE_CRASH:
*p = 5;
break;
// Menu item used to register for restart (checked) and to
// remove the registration (unchecked). The application must be running
// for at least 60 seconds before it can be restarted if an access
// violation occurs (select Crash from the File menu).
case ID_FILE_RESTART:
hMenu = GetMenu(hWnd);
if (hMenu)
{
RtlZeroMemory(&miInfo, sizeof(MENUITEMINFO));
miInfo.cbSize = sizeof(MENUITEMINFO);
miInfo.fMask = MIIM_STATE;
if (GetMenuItemInfo(hMenu, ID_FILE_RESTART, FALSE, &miInfo))
{
// Toggling Restart to unchecked. Remove restart registration.
if ((miInfo.fState & MFS_CHECKED) == MFS_CHECKED)
{
miInfo.fState &= ~MFS_CHECKED;
miInfo.fState |= MFS_UNCHECKED;
hr = UnregisterApplicationRestart();
if (FAILED(hr))
{
// Not failing because removing the registration failed.
}
}
else // Toggling Restart to checked. Register for restart.
{
miInfo.fState &= ~MFS_UNCHECKED;
miInfo.fState |= MFS_CHECKED;
// Register for restart. The command line is updated in the recovery callback,
// if recovery is selected.
RtlZeroMemory(wsCommandLine, sizeof(wsCommandLine));
g_dwRecordId += 10; // Incrementing to show different value on restart.
StringCchPrintf(wsCommandLine, RESTART_MAX_CMD_LINE, L"/restart -r:%lu", g_dwRecordId);
hr = RegisterApplicationRestart(wsCommandLine, RESTART_NO_PATCH | RESTART_NO_REBOOT);
if (FAILED(hr))
{
// Not failing because the registration failed.
}
MessageBox(hWnd, L"You must wait 60 seconds before selecting Crash from the\n"
L"File menu to crash the application and test the restart feature.",
L"Registered for restart",
MB_OK | MB_ICONINFORMATION);
}
if (!SetMenuItemInfo(hMenu, ID_FILE_RESTART, FALSE, &miInfo))
{
// Handle error; call GetLastError() to get the error.
}
}
}
else
{
// Handle error; call GetLastError() to get the error.
}
break;
// Menu item use to register for recovery (checked) and to
// remove the registration (unchecked).
case ID_FILE_RECOVER:
hMenu = GetMenu(hWnd);
if (hMenu)
{
RtlZeroMemory(&miInfo, sizeof(MENUITEMINFO));
miInfo.cbSize = sizeof(MENUITEMINFO);
miInfo.fMask = MIIM_STATE;
if (GetMenuItemInfo(hMenu, ID_FILE_RECOVER, FALSE, &miInfo))
{
if ((miInfo.fState & MFS_CHECKED) == MFS_CHECKED)
{
miInfo.fState &= ~MFS_CHECKED;
miInfo.fState |= MFS_UNCHECKED;
hr = UnregisterApplicationRecoveryCallback();
if (FAILED(hr))
{
// Not failing because removing the registration failed.
}
}
else
{
miInfo.fState &= ~MFS_UNCHECKED;
miInfo.fState |= MFS_CHECKED;
hr = RegisterApplicationRecoveryCallback(Recover, &g_dwRecordId, RECOVERY_DEFAULT_PING_INTERVAL, 0);
if (FAILED(hr))
{
// Not failing because the registration failed.
}
}
if (!SetMenuItemInfo(hMenu, ID_FILE_RECOVER, FALSE, &miInfo))
{
// Handle the error; call GetLastError() to get the error.
}
}
}
else
{
// Handle error; call GetLastError() to get the error.
}
break;
case IDM_EXIT:
DestroyWindow(hWnd);
break;
default:
return DefWindowProc(hWnd, message, wParam, lParam);
}
break;
case WM_PAINT:
hdc = BeginPaint(hWnd, &ps);
// TODO: Add any drawing code here...
EndPaint(hWnd, &ps);
break;
case WM_DESTROY:
PostQuitMessage(0);
break;
case WM_CLOSE:
// You could use this message to handle additional recovery
// processing if you are unable to finish recovery in the
// WM_ENDSESSION message. This is for the application update
// case only.
DestroyWindow(hWnd);
break;
// The WM_QUERYENDSESSION and WM_ENDSESSION messages are used for
// recovery only in the case where the application is being updated.
// The recovery callback is used instead for the case where the
// application becomes unresponsive or encounters an unhandled exception.
case WM_QUERYENDSESSION:
// Check the lParam parameter for why the system is asking the application to close.
// The Restart Manager sets lParam to ENDSESSION_CLOSEAPP when installer needs to
// replace files that the application is using.
if (lParam & ENDSESSION_CLOSEAPP)
{
// Consider using EnableWindow to disable the mouse & keyboard input until
// receiving the WM_ENDSESSION message.
// This message is the last opportunity to call the RegisterApplicationRestart
// function to register to have your application restarted after the update
// completes. If you have already registered for restart, you can use this
// opportunity to update the command line arguments.
hr = RegisterApplicationRestart(L"<commandlinearguments>", 0);
if (FAILED(hr))
{
// Log an event or do some error handling.
}
// Typically, applications should respect the user's or system's request and return
// TRUE to indicate that they are willing to close. If the application is performing
// a critical operation which cannot be interrupted, such as burning media, then you
// should return FALSE. If you return FALSE, you should also call the
// ShutdownBlockReasonCreate function to specify a reason for blocking the shutdown
// operation. After the critical operation has completed, call the
// ShutdownBlockReasonDestroy function to indicate that the application is now
// ready to terminate.
return TRUE;
}
return TRUE;
case WM_ENDSESSION:
// You receive this message after receiving the WM_QUERYENDSESSION message. The lParam
// parameter indicates why the system asked the application to close. The Restart
// Manager sets lParam to ENDSESSION_CLOSEAPP when installer needs to replace files
// that the application is using.
if (lParam & ENDSESSION_CLOSEAPP)
{
// You also need to check the value of the wParam parameter. The wParam value
// indicates if the application should close or not based on the results of
// the query. If the value is TRUE, the application is closing.
if (wParam == TRUE)
{
// You should use this opportunity to save data and state information.
}
else // FALSE, the application is not closing
{
// If you disabled the mouse and keyboard input as suggested in
// the WM_QUERYENDSESSION message, you should call the EnableWindow
// function to enable the input.
// You could call the RegisterApplicationRestart function to update the
// command line as appropriate for your application.
hr = RegisterApplicationRestart(L"<commandlinearguments>", 0);
if (FAILED(hr))
{
// Log an event or do some error handling.
}
}
}
return 0;
// This example does not show other messages such as WM_PAINT
// or WM_DESTROY.
default:
return DefWindowProc(hWnd, message, wParam, lParam);
}
return 0;
}
// Implement the recovery callback. This callback lets the application
// save state information or data in the event that the application
// encounters an unhandled exception or becomes unresponsive.
DWORD WINAPI Recover(PVOID pContext)
{
HRESULT hr = S_OK;
BOOL bCanceled = FALSE;
DWORD dwRecordId = *(DWORD*)pContext;
WCHAR wsCommandLine[RESTART_MAX_CMD_LINE];
// Do recovery work. Save state information.
// Update the restart command line if restart is requested.
if (IsRestartSelected())
{
RtlZeroMemory(wsCommandLine, sizeof(wsCommandLine));
StringCchPrintf(wsCommandLine, RESTART_MAX_CMD_LINE, L"/restart -r:%lu", dwRecordId);
hr = RegisterApplicationRestart(wsCommandLine, RESTART_NO_PATCH | RESTART_NO_REBOOT);
if (FAILED(hr))
{
// Not failing because the registration failed.
wprintf(L"RegisterApplicationRestart failed with ox%x.\n", hr);
}
}
// You must call the ApplicationRecoveryInProgress function within
// the specified ping interval or the recovery callback exits.
// Typically, you would do a block of work, call the function, and repeat.
ApplicationRecoveryInProgress(&bCanceled);
if (bCanceled)
{
wprintf(L"Recovery was canceled by the user.\n");
goto cleanup;
}
cleanup:
ApplicationRecoveryFinished((bCanceled) ? FALSE: TRUE);
return 0;
}
BOOL IsRestartSelected()
{
BOOL fSelected = FALSE;
HMENU hMenu;
MENUITEMINFO miInfo;
hMenu = GetMenu(g_hwnd);
if (hMenu)
{
RtlZeroMemory(&miInfo, sizeof(MENUITEMINFO));
miInfo.cbSize = sizeof(MENUITEMINFO);
miInfo.fMask = MIIM_STATE;
if (GetMenuItemInfo(hMenu, ID_FILE_RESTART, FALSE, &miInfo))
{
if ((miInfo.fState & MFS_CHECKED) == MFS_CHECKED)
fSelected = TRUE;
}
}
return fSelected;
}
Voici le fichier include recover.h pour l’exemple de récupération.
#pragma once
#include "resource.h"
Voici le fichier de ressources recover.rc pour l’exemple de récupération.
// Microsoft Visual C++ generated resource script.
//
#include "resource.h"
#define APSTUDIO_READONLY_SYMBOLS
/////////////////////////////////////////////////////////////////////////////
//
// Generated from the TEXTINCLUDE 2 resource.
//
#define APSTUDIO_HIDDEN_SYMBOLS
#include "windows.h"
#undef APSTUDIO_HIDDEN_SYMBOLS
/////////////////////////////////////////////////////////////////////////////
#undef APSTUDIO_READONLY_SYMBOLS
/////////////////////////////////////////////////////////////////////////////
// English (U.S.) resources
#if !defined(AFX_RESOURCE_DLL) || defined(AFX_TARG_ENU)
#ifdef _WIN32
LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
#pragma code_page(1252)
#endif //_WIN32
/////////////////////////////////////////////////////////////////////////////
//
// Menu
//
IDC_RECOVER MENU
BEGIN
POPUP "&File"
BEGIN
MENUITEM "C&rash", ID_FILE_CRASH
MENUITEM "&Restart", ID_FILE_RESTART
MENUITEM "Re&cover", ID_FILE_RECOVER
MENUITEM "E&xit", IDM_EXIT
END
END
#ifdef APSTUDIO_INVOKED
/////////////////////////////////////////////////////////////////////////////
//
// TEXTINCLUDE
//
1 TEXTINCLUDE
BEGIN
"resource.h\0"
END
2 TEXTINCLUDE
BEGIN
"#define APSTUDIO_HIDDEN_SYMBOLS\r\n"
"#include ""windows.h""\r\n"
"#undef APSTUDIO_HIDDEN_SYMBOLS\r\n"
"\0"
END
3 TEXTINCLUDE
BEGIN
"\r\n"
"\0"
END
#endif // APSTUDIO_INVOKED
#endif // English (U.S.) resources
/////////////////////////////////////////////////////////////////////////////
#ifndef APSTUDIO_INVOKED
/////////////////////////////////////////////////////////////////////////////
//
// Generated from the TEXTINCLUDE 3 resource.
//
/////////////////////////////////////////////////////////////////////////////
#endif // not APSTUDIO_INVOKED
Voici le fichier include resource.h pour l’exemple de récupération.
//{{NO_DEPENDENCIES}}
// Microsoft Visual C++ generated include file.
// Used by Recover.rc
//
#define IDS_APP_TITLE 103
#define IDM_EXIT 105
#define IDC_RECOVER 109
#define IDR_MAINFRAME 128
#define ID_FILE_CRASH 32771
#define ID_FILE_RESTART 32772
#define ID_FILE_RECOVER 32773
#define IDC_STATIC -1
// Next default values for new objects
//
#ifdef APSTUDIO_INVOKED
#ifndef APSTUDIO_READONLY_SYMBOLS
#define _APS_NO_MFC 1
#define _APS_NEXT_RESOURCE_VALUE 129
#define _APS_NEXT_COMMAND_VALUE 32774
#define _APS_NEXT_CONTROL_VALUE 1000
#define _APS_NEXT_SYMED_VALUE 110
#endif
#endif
Commentaires
Bientôt disponible : Tout au long de 2024, nous allons supprimer progressivement GitHub Issues comme mécanisme de commentaires pour le contenu et le remplacer par un nouveau système de commentaires. Pour plus d’informations, consultez https://aka.ms/ContentUserFeedback.
Envoyer et afficher des commentaires pour