Partager via


Bluetooth RFCOMM

Ce sujet fournit une vue d’ensemble de RFCOMM Bluetooth dans les applications de plateforme Windows universelle (UWP), ainsi qu’un exemple de code illustrant la façon d’envoyer ou de recevoir un fichier.

API importantes

Important

Vous devez déclarer la fonctionnalité « Bluetooth » dans Package.appxmanifest.

<Capabilities> <DeviceCapability Name="bluetooth" /> </Capabilities>

Vue d’ensemble

Les API de l’espace de noms Windows.Devices.Bluetooth.Rfcomm s’appuient sur des schémas existants pour Windows.Devices, notamment énumération et instanciation. La lecture et l’écriture de données tirent parti des schémas de flux de données établis et des objets dans Windows.Storage.Streams. Les attributs SDP (Service Discovery Protocol) ont une valeur et un type attendu. Toutefois, certains appareils courants ont des implémentations défectueuses d’attributs SDP où la valeur n’est pas du type attendu. En outre, de nombreuses utilisations de RFCOMM ne nécessitent pas d’attributs SDP supplémentaires. Pour ces raisons, cette API offre un accès aux données SDP non analysées, à partir desquelles les développeurs peuvent obtenir les informations dont ils ont besoin.

Les API RFCOMM utilisent le concept d’identificateurs de service. Bien qu’un identificateur de service soit simplement un GUID 128 bits, il est également généralement spécifié sous la forme d’un entier 16 ou 32 bits. L’API RFCOMM offre un wrapper pour les identificateurs de service qui leur permet d’être spécifiés et consommés en tant que GUID 128 bits ainsi que des entiers 32 bits, mais n’offre pas d’entiers 16 bits. Ce n’est pas un problème pour l’API, car les langages sont automatiquement mis à niveau vers un entier 32 bits et que l’identificateur peut toujours être généré correctement.

Les applications peuvent effectuer des opérations d’appareil en plusieurs étapes dans une tâche en arrière-plan afin qu’elles puissent s’exécuter jusqu’à la fin même si l’application est déplacée vers l’arrière-plan et suspendue. Cela permet une maintenance fiable des appareils, telles que les modifications apportées aux paramètres persistants ou au microprogramme et à la synchronisation de contenu, sans obliger l’utilisateur à s’asseoir et à regarder une barre de progression. Utilisez DeviceServicingTrigger pour la maintenance de l’appareil et DeviceUseTrigger pour la synchronisation du contenu. Notez que ces tâches en arrière-plan limitent la durée pendant laquelle l’application peut s’exécuter en arrière-plan et ne sont pas destinées à autoriser l’opération indéfinie ou la synchronisation infinie.

Pour un exemple de code complet détaillant l’opération RFCOMM, voir l’exemple de conversation RFCOMM Bluetooth sur Github.

Envoyez un fichier en tant que client

Lors de l’envoi d’un fichier, le scénario le plus simple consiste à se connecter à un appareil jumelé en fonction d’un service souhaité. Cela implique les étapes suivantes :

using System;
using System.Threading.Tasks;
using Windows.Devices.Bluetooth.Rfcomm;
using Windows.Networking.Sockets;
using Windows.Storage.Streams;
using Windows.Devices.Bluetooth;

Windows.Devices.Bluetooth.Rfcomm.RfcommDeviceService _service;
Windows.Networking.Sockets.StreamSocket _socket;

async void Initialize()
{
    // Enumerate devices with the object push service
    var services =
        await Windows.Devices.Enumeration.DeviceInformation.FindAllAsync(
            RfcommDeviceService.GetDeviceSelector(
                RfcommServiceId.ObexObjectPush));

    if (services.Count > 0)
    {
        // Initialize the target Bluetooth BR device
        var service = await RfcommDeviceService.FromIdAsync(services[0].Id);

        bool isCompatibleVersion = await IsCompatibleVersionAsync(service);

        // Check that the service meets this App's minimum requirement
        if (SupportsProtection(service) && isCompatibleVersion)
        {
            _service = service;

            // Create a socket and connect to the target
            _socket = new StreamSocket();
            await _socket.ConnectAsync(
                _service.ConnectionHostName,
                _service.ConnectionServiceName,
                SocketProtectionLevel
                    .BluetoothEncryptionAllowNullAuthentication);

            // The socket is connected. At this point the App can wait for
            // the user to take some action, for example, click a button to send a
            // file to the device, which could invoke the Picker and then
            // send the picked file. The transfer itself would use the
            // Sockets API and not the Rfcomm API, and so is omitted here for
            // brevity.
        }
    }
}

// This App requires a connection that is encrypted but does not care about
// whether it's authenticated.
bool SupportsProtection(RfcommDeviceService service)
{
    switch (service.ProtectionLevel)
    {
        case SocketProtectionLevel.PlainSocket:
            if ((service.MaxProtectionLevel == SocketProtectionLevel
                    .BluetoothEncryptionWithAuthentication)
                || (service.MaxProtectionLevel == SocketProtectionLevel
                    .BluetoothEncryptionAllowNullAuthentication))
            {
                // The connection can be upgraded when opening the socket so the
                // App may offer UI here to notify the user that Windows may
                // prompt for a PIN exchange.
                return true;
            }
            else
            {
                // The connection cannot be upgraded so an App may offer UI here
                // to explain why a connection won't be made.
                return false;
            }
        case SocketProtectionLevel.BluetoothEncryptionWithAuthentication:
            return true;
        case SocketProtectionLevel.BluetoothEncryptionAllowNullAuthentication:
            return true;
    }
    return false;
}

// This App relies on CRC32 checking available in version 2.0 of the service.
const uint SERVICE_VERSION_ATTRIBUTE_ID = 0x0300;
const byte SERVICE_VERSION_ATTRIBUTE_TYPE = 0x0A;   // UINT32
const uint MINIMUM_SERVICE_VERSION = 200;
async Task<bool> IsCompatibleVersionAsync(RfcommDeviceService service)
{
    var attributes = await service.GetSdpRawAttributesAsync(
        BluetoothCacheMode.Uncached);
    var attribute = attributes[SERVICE_VERSION_ATTRIBUTE_ID];
    var reader = DataReader.FromBuffer(attribute);

    // The first byte contains the attribute's type
    byte attributeType = reader.ReadByte();
    if (attributeType == SERVICE_VERSION_ATTRIBUTE_TYPE)
    {
        // The remainder is the data
        uint version = reader.ReadUInt32();
        return version >= MINIMUM_SERVICE_VERSION;
    }
    else return false;
}
...
#include <winrt/Windows.Devices.Bluetooth.Rfcomm.h>
#include <winrt/Windows.Devices.Enumeration.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
...
Windows::Devices::Bluetooth::Rfcomm::RfcommDeviceService m_service{ nullptr };
Windows::Networking::Sockets::StreamSocket m_socket;

Windows::Foundation::IAsyncAction Initialize()
{
    // Enumerate devices with the object push service.
    Windows::Devices::Enumeration::DeviceInformationCollection services{
        co_await Windows::Devices::Enumeration::DeviceInformation::FindAllAsync(
            Windows::Devices::Bluetooth::Rfcomm::RfcommDeviceService::GetDeviceSelector(
                Windows::Devices::Bluetooth::Rfcomm::RfcommServiceId::ObexObjectPush())) };

    if (services.Size() > 0)
    {
        // Initialize the target Bluetooth BR device.
        Windows::Devices::Bluetooth::Rfcomm::RfcommDeviceService service{
            co_await Windows::Devices::Bluetooth::Rfcomm::RfcommDeviceService::FromIdAsync(services.GetAt(0).Id()) };

        // Check that the service meets this App's minimum
        // requirement
        if (SupportsProtection(service)
            && co_await IsCompatibleVersion(service))
        {
            m_service = service;

            // Create a socket and connect to the target
            co_await m_socket.ConnectAsync(
                m_service.ConnectionHostName(),
                m_service.ConnectionServiceName(),
                Windows::Networking::Sockets::SocketProtectionLevel::BluetoothEncryptionAllowNullAuthentication);

            // The socket is connected. At this point the App can
            // wait for the user to take some action, for example, click
            // a button to send a file to the device, which could
            // invoke the Picker and then send the picked file.
            // The transfer itself would use the Sockets API and
            // not the Rfcomm API, and so is omitted here for
            //brevity.
        }
    }
}

// This App requires a connection that is encrypted but does not care about
// whether it's authenticated.
bool SupportsProtection(Windows::Devices::Bluetooth::Rfcomm::RfcommDeviceService const& service)
{
    switch (service.ProtectionLevel())
    {
    case Windows::Networking::Sockets::SocketProtectionLevel::PlainSocket:
        if ((service.MaxProtectionLevel() == Windows::Networking::Sockets::SocketProtectionLevel::BluetoothEncryptionWithAuthentication)
            || (service.MaxProtectionLevel() == Windows::Networking::Sockets::SocketProtectionLevel::BluetoothEncryptionAllowNullAuthentication))
        {
            // The connection can be upgraded when opening the socket so the
            // App may offer UI here to notify the user that Windows may
            // prompt for a PIN exchange.
            return true;
        }
        else
        {
            // The connection cannot be upgraded so an App may offer UI here
            // to explain why a connection won't be made.
            return false;
        }
    case Windows::Networking::Sockets::SocketProtectionLevel::BluetoothEncryptionWithAuthentication:
        return true;
    case Windows::Networking::Sockets::SocketProtectionLevel::BluetoothEncryptionAllowNullAuthentication:
        return true;
    }
    return false;
}

// This application relies on CRC32 checking available in version 2.0 of the service.
const uint32_t SERVICE_VERSION_ATTRIBUTE_ID{ 0x0300 };
const byte SERVICE_VERSION_ATTRIBUTE_TYPE{ 0x0A }; // UINT32.
const uint32_t MINIMUM_SERVICE_VERSION{ 200 };

Windows::Foundation::IAsyncOperation<bool> IsCompatibleVersion(Windows::Devices::Bluetooth::Rfcomm::RfcommDeviceService const& service)
{
    auto attributes{
        co_await service.GetSdpRawAttributesAsync(Windows::Devices::Bluetooth::BluetoothCacheMode::Uncached) };

    auto attribute{ attributes.Lookup(SERVICE_VERSION_ATTRIBUTE_ID) };
    auto reader{ Windows::Storage::Streams::DataReader::FromBuffer(attribute) };

    // The first byte contains the attribute's type.
    byte attributeType{ reader.ReadByte() };
    if (attributeType == SERVICE_VERSION_ATTRIBUTE_TYPE)
    {
        // The remainder is the data
        uint32_t version{ reader.ReadUInt32() };
        co_return (version >= MINIMUM_SERVICE_VERSION);
    }
}
...
Windows::Devices::Bluetooth::Rfcomm::RfcommDeviceService^ _service;
Windows::Networking::Sockets::StreamSocket^ _socket;

void Initialize()
{
    // Enumerate devices with the object push service
    create_task(
        Windows::Devices::Enumeration::DeviceInformation::FindAllAsync(
            RfcommDeviceService::GetDeviceSelector(
                RfcommServiceId::ObexObjectPush)))
    .then([](DeviceInformationCollection^ services)
    {
        if (services->Size > 0)
        {
            // Initialize the target Bluetooth BR device
            create_task(RfcommDeviceService::FromIdAsync(services[0]->Id))
            .then([](RfcommDeviceService^ service)
            {
                // Check that the service meets this App's minimum
                // requirement
                if (SupportsProtection(service)
                    && IsCompatibleVersion(service))
                {
                    _service = service;

                    // Create a socket and connect to the target
                    _socket = ref new StreamSocket();
                    create_task(_socket->ConnectAsync(
                        _service->ConnectionHostName,
                        _service->ConnectionServiceName,
                        SocketProtectionLevel
                            ::BluetoothEncryptionAllowNullAuthentication)
                    .then([](void)
                    {
                        // The socket is connected. At this point the App can
                        // wait for the user to take some action, for example, click
                        // a button to send a file to the device, which could
                        // invoke the Picker and then send the picked file.
                        // The transfer itself would use the Sockets API and
                        // not the Rfcomm API, and so is omitted here for
                        //brevity.
                    });
                }
            });
        }
    });
}

// This App requires a connection that is encrypted but does not care about
// whether it's authenticated.
bool SupportsProtection(RfcommDeviceService^ service)
{
    switch (service->ProtectionLevel)
    {
    case SocketProtectionLevel->PlainSocket:
        if ((service->MaxProtectionLevel == SocketProtectionLevel
                ::BluetoothEncryptionWithAuthentication)
            || (service->MaxProtectionLevel == SocketProtectionLevel
                ::BluetoothEncryptionAllowNullAuthentication))
        {
            // The connection can be upgraded when opening the socket so the
            // App may offer UI here to notify the user that Windows may
            // prompt for a PIN exchange.
            return true;
        }
        else
        {
            // The connection cannot be upgraded so an App may offer UI here
            // to explain why a connection won't be made.
            return false;
        }
    case SocketProtectionLevel::BluetoothEncryptionWithAuthentication:
        return true;
    case SocketProtectionLevel::BluetoothEncryptionAllowNullAuthentication:
        return true;
    }
    return false;
}

// This App relies on CRC32 checking available in version 2.0 of the service.
const uint SERVICE_VERSION_ATTRIBUTE_ID = 0x0300;
const byte SERVICE_VERSION_ATTRIBUTE_TYPE = 0x0A;   // UINT32
const uint MINIMUM_SERVICE_VERSION = 200;
bool IsCompatibleVersion(RfcommDeviceService^ service)
{
    auto attributes = await service->GetSdpRawAttributesAsync(
        BluetoothCacheMode::Uncached);
    auto attribute = attributes[SERVICE_VERSION_ATTRIBUTE_ID];
    auto reader = DataReader.FromBuffer(attribute);

    // The first byte contains the attribute's type
    byte attributeType = reader->ReadByte();
    if (attributeType == SERVICE_VERSION_ATTRIBUTE_TYPE)
    {
        // The remainder is the data
        uint version = reader->ReadUInt32();
        return version >= MINIMUM_SERVICE_VERSION;
    }
}

Recevez un fichier en tant que serveur

Un autre scénario courant d’application RFCOMM consiste à héberger un service sur le PC et à l’exposer pour d’autres appareils.

  • Créez un RfcommServiceProvider pour publier le service souhaité.
  • Définissez les attributs SDP en fonction des besoins (en utilisant la méthode application auxiliaires aux données établies pour générer les données de l’attribut), puis commencez à annoncer les enregistrements SDP pour que d’autres périphériques puissent les récupérer.
  • Pour vous connecter à un appareil client, créez un écouteur de socket pour commencer à écouter les requêtes de connexion entrantes.
  • Lorsqu’une connexion est reçue, la socket connectée est stockée en vue d’un traitement ultérieur.
  • Suivez les modèles de flux de données établis pour lire des blocs de données à partir de InputStream du socket et l’enregistrer dans un fichier.

Pour rendre persistant un service RFCOMM en arrière-plan, utilisez la méthode RfcommConnectionTrigger. La tâche en arrière-plan est déclenchée lors de la connexion au service. Le développeur reçoit un handle au socket dans la tâche en arrière-plan. La tâche en arrière-plan est longue et persiste tant que le socket est en cours d’utilisation.

Windows.Devices.Bluetooth.Rfcomm.RfcommServiceProvider _provider;

async void Initialize()
{
    // Initialize the provider for the hosted RFCOMM service
    _provider =
        await Windows.Devices.Bluetooth.Rfcomm.RfcommServiceProvider.CreateAsync(
            RfcommServiceId.ObexObjectPush);

    // Create a listener for this service and start listening
    StreamSocketListener listener = new StreamSocketListener();
    listener.ConnectionReceived += OnConnectionReceivedAsync;
    await listener.BindServiceNameAsync(
        _provider.ServiceId.AsString(),
        SocketProtectionLevel
            .BluetoothEncryptionAllowNullAuthentication);

    // Set the SDP attributes and start advertising
    InitializeServiceSdpAttributes(_provider);
    _provider.StartAdvertising(listener);
}

const uint SERVICE_VERSION_ATTRIBUTE_ID = 0x0300;
const byte SERVICE_VERSION_ATTRIBUTE_TYPE = 0x0A;   // UINT32
const uint SERVICE_VERSION = 200;

void InitializeServiceSdpAttributes(RfcommServiceProvider provider)
{
    Windows.Storage.Streams.DataWriter writer = new Windows.Storage.Streams.DataWriter();

    // First write the attribute type
    writer.WriteByte(SERVICE_VERSION_ATTRIBUTE_TYPE);
    // Then write the data
    writer.WriteUInt32(MINIMUM_SERVICE_VERSION);

    IBuffer data = writer.DetachBuffer();
    provider.SdpRawAttributes.Add(SERVICE_VERSION_ATTRIBUTE_ID, data);
}

void OnConnectionReceivedAsync(
    StreamSocketListener listener,
    StreamSocketListenerConnectionReceivedEventArgs args)
{
    // Stop advertising/listening so that we're only serving one client
    _provider.StopAdvertising();
    listener.Dispose();
    _socket = args.Socket;

    // The client socket is connected. At this point the App can wait for
    // the user to take some action, for example, click a button to receive a file
    // from the device, which could invoke the Picker and then save the
    // received file to the picked location. The transfer itself would use
    // the Sockets API and not the Rfcomm API, and so is omitted here for
    // brevity.
}
...
#include <winrt/Windows.Devices.Bluetooth.Rfcomm.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
...
Windows::Devices::Bluetooth::Rfcomm::RfcommServiceProvider m_provider{ nullptr };
Windows::Networking::Sockets::StreamSocket m_socket;

Windows::Foundation::IAsyncAction Initialize()
{
    // Initialize the provider for the hosted RFCOMM service.
    auto provider{ co_await Windows::Devices::Bluetooth::Rfcomm::RfcommServiceProvider::CreateAsync(
        Windows::Devices::Bluetooth::Rfcomm::RfcommServiceId::ObexObjectPush()) };

    m_provider = provider;

    // Create a listener for this service and start listening.
    Windows::Networking::Sockets::StreamSocketListener listener;
    listener.ConnectionReceived({ this, &MainPage::OnConnectionReceived });

    co_await listener.BindServiceNameAsync(m_provider.ServiceId().AsString(),
        Windows::Networking::Sockets::SocketProtectionLevel::BluetoothEncryptionAllowNullAuthentication);

    // Set the SDP attributes and start advertising
    InitializeServiceSdpAttributes();
    m_provider.StartAdvertising(listener);
}

const uint32_t SERVICE_VERSION_ATTRIBUTE_ID{ 0x0300 };
const byte SERVICE_VERSION_ATTRIBUTE_TYPE{ 0x0A };   // UINT32.
const uint32_t SERVICE_VERSION{ 200 };

void InitializeServiceSdpAttributes()
{
    Windows::Storage::Streams::DataWriter writer;

    // First write the attribute type
    writer.WriteByte(SERVICE_VERSION_ATTRIBUTE_TYPE);
    // Then write the data
    writer.WriteUInt32(SERVICE_VERSION);

    auto data{ writer.DetachBuffer() };
    m_provider.SdpRawAttributes().Insert(SERVICE_VERSION_ATTRIBUTE_ID, data);
}

void OnConnectionReceived(
    Windows::Networking::Sockets::StreamSocketListener const& listener,
    Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs const& args)
{
    // Stop advertising/listening so that we're only serving one client
    m_provider.StopAdvertising();
    listener.Close();
    m_socket = args.Socket();

    // The client socket is connected. At this point the application can wait for
    // the user to take some action, for example, click a button to receive a
    // file from the device, which could invoke the Picker and then save
    // the received file to the picked location. The transfer itself
    // would use the Sockets API and not the Rfcomm API, and so is
    // omitted here for brevity.
}
...
Windows::Devices::Bluetooth::Rfcomm::RfcommServiceProvider^ _provider;
Windows::Networking::Sockets::StreamSocket^ _socket;

void Initialize()
{
    // Initialize the provider for the hosted RFCOMM service
    create_task(Windows::Devices::Bluetooth.
        RfcommServiceProvider::CreateAsync(
            RfcommServiceId::ObexObjectPush))
    .then([](RfcommServiceProvider^ provider) -> task<void> {
        _provider = provider;

        // Create a listener for this service and start listening
        auto listener = ref new StreamSocketListener();
        listener->ConnectionReceived += ref new TypedEventHandler<
                StreamSocketListener^,
                StreamSocketListenerConnectionReceivedEventArgs^>
           (&OnConnectionReceived);
        return create_task(listener->BindServiceNameAsync(
            _provider->ServiceId->AsString(),
            SocketProtectionLevel
                ::BluetoothEncryptionAllowNullAuthentication));
    }).then([listener](void) {
        // Set the SDP attributes and start advertising
        InitializeServiceSdpAttributes(_provider);
        _provider->StartAdvertising(listener);
    });
}

const uint SERVICE_VERSION_ATTRIBUTE_ID = 0x0300;
const byte SERVICE_VERSION_ATTRIBUTE_TYPE = 0x0A;   // UINT32
const uint SERVICE_VERSION = 200;
void InitializeServiceSdpAttributes(RfcommServiceProvider^ provider)
{
    auto writer = ref new Windows::Storage::Streams::DataWriter();

    // First write the attribute type
    writer->WriteByte(SERVICE_VERSION_ATTRIBUTE_TYPE);
    // Then write the data
    writer->WriteUInt32(SERVICE_VERSION);

    auto data = writer->DetachBuffer();
    provider->SdpRawAttributes->Add(SERVICE_VERSION_ATTRIBUTE_ID, data);
}

void OnConnectionReceived(
    StreamSocketListener^ listener,
    StreamSocketListenerConnectionReceivedEventArgs^ args)
{
    // Stop advertising/listening so that we're only serving one client
    _provider->StopAdvertising();
    create_task(listener->Close())
    .then([args](void) {
        _socket = args->Socket;

        // The client socket is connected. At this point the App can wait for
        // the user to take some action, for example, click a button to receive a
        // file from the device, which could invoke the Picker and then save
        // the received file to the picked location. The transfer itself
        // would use the Sockets API and not the Rfcomm API, and so is
        // omitted here for brevity.
    });
}