Copy and transform data in Microsoft Fabric Warehouse using Azure Data Factory or Azure Synapse Analytics

Alt
09/25/2024

APPLIES TO: Azure Data Factory Azure Synapse Analytics

Tip

Try out Data Factory in Microsoft Fabric, an all-in-one analytics solution for enterprises. Microsoft Fabric covers everything from data movement to data science, real-time analytics, business intelligence, and reporting. Learn how to start a new trial for free!

This article outlines how to use Copy Activity to copy data from and to Microsoft Fabric Warehouse. To learn more, read the introductory article for Azure Data Factory or Azure Synapse Analytics.

Supported capabilities

This Microsoft Fabric Warehouse connector is supported for the following capabilities:

Supported capabilities	IR	Managed private endpoint
Copy activity (source/sink)	① ②	✓
Mapping data flow (source/sink)	①	✓
Lookup activity	① ②	✓
GetMetadata activity	① ②	✓
Script activity	① ②	✓
Stored procedure activity	① ②	✓

① Azure integration runtime ② Self-hosted integration runtime

Get started

To perform the Copy activity with a pipeline, you can use one of the following tools or SDKs:

Create a Microsoft Fabric Warehouse linked service using UI

Use the following steps to create a Microsoft Fabric Warehouse linked service in the Azure portal UI.

Browse to the Manage tab in your Azure Data Factory or Synapse workspace and select Linked Services, then select New:
- Azure Data Factory
- Azure Synapse
Search for Warehouse and select the connector.
Configure the service details, test the connection, and create the new linked service.

Connector configuration details

The following sections provide details about properties that are used to define Data Factory entities specific to Microsoft Fabric Warehouse.

Linked service properties

The Microsoft Fabric Warehouse connector supports the following authentication types. See the corresponding sections for details:

Service principal authentication

Service principal authentication

To use service principal authentication, follow these steps.

Register an application with the Microsoft Identity platform and add a client secret. Afterwards, make note of these values, which you use to define the linked service:
- Application (client) ID, which is the service principal ID in the linked service.
- Client secret value, which is the service principal key in the linked service.
- Tenant ID
Grant the service principal at least the Contributor role in Microsoft Fabric workspace. Follow these steps:
1. Go to your Microsoft Fabric workspace, select Manage access on the top bar. Then select Add people or groups.
2. In Add people pane, enter your service principal name, and select your service principal from the drop-down list.
3. Specify the role as Contributor or higher (Admin, Member), then select Add.
4. Your service principal is displayed on Manage access pane.

These properties are supported for the linked service:

Property	Description	Required
type	The type property must be set to Warehouse.	Yes
endpoint	The endpoint of Microsoft Fabric Warehouse server.	Yes
workspaceId	The Microsoft Fabric workspace ID.	Yes
artifactId	The Microsoft Fabric Warehouse object ID.	Yes
tenant	Specify the tenant information (domain name or tenant ID) under which your application resides. Retrieve it by hovering the mouse in the upper-right corner of the Azure portal.	Yes
servicePrincipalId	Specify the application's client ID.	Yes
servicePrincipalCredentialType	The credential type to use for service principal authentication. Allowed values are ServicePrincipalKey and ServicePrincipalCert.	Yes
servicePrincipalCredential	The service principal credential. When you use ServicePrincipalKey as the credential type, specify the application's client secret value. Mark this field as SecureString to store it securely, or reference a secret stored in Azure Key Vault. When you use ServicePrincipalCert as the credential, reference a certificate in Azure Key Vault, and ensure the certificate content type is PKCS #12.	Yes
connectVia	The integration runtime to be used to connect to the data store. You can use the Azure integration runtime or a self-hosted integration runtime if your data store is in a private network. If not specified, the default Azure integration runtime is used.	No

Example: using service principal key authentication

You can also store service principal key in Azure Key Vault.

{
    "name": "MicrosoftFabricWarehouseLinkedService",
    "properties": {
        "type": "Warehouse",
        "typeProperties": {
            "endpoint": "<Microsoft Fabric Warehouse server endpoint>",
            "workspaceId": "<Microsoft Fabric workspace ID>",
            "artifactId": "<Microsoft Fabric Warehouse object ID>",
            "tenant": "<tenant info, e.g. microsoft.onmicrosoft.com>",
            "servicePrincipalId": "<service principal id>",
            "servicePrincipalCredentialType": "ServicePrincipalKey",
            "servicePrincipalCredential": {
                "type": "SecureString",
                "value": "<service principal key>"
            }   
        },
        "connectVia": {
            "referenceName": "<name of Integration Runtime>",
            "type": "IntegrationRuntimeReference"
        }
    }
}

Dataset properties

For a full list of sections and properties available for defining datasets, see the Datasets article.

The following properties are supported for Microsoft Fabric Warehouse dataset:

Property	Description	Required
type	The type property of the dataset must be set to WarehouseTable.	Yes
schema	Name of the schema.	No for source, Yes for sink
table	Name of the table/view.	No for source, Yes for sink

Dataset properties example

{
    "name": "FabricWarehouseTableDataset",
    "properties": {
        "type": "WarehouseTable",
        "linkedServiceName": {
            "referenceName": "<Microsoft Fabric Warehouse linked service name>",
            "type": "LinkedServiceReference"
        },
        "schema": [ < physical schema, optional, retrievable during authoring >
        ],
        "typeProperties": {
            "schema": "<schema_name>",
            "table": "<table_name>"
        }
    }
}

Copy activity properties

For a full list of sections and properties available for defining activities, see Copy activity configurations and Pipelines and activities. This section provides a list of properties supported by the Microsoft Fabric Warehouse source and sink.

Microsoft Fabric Warehouse as the source

Tip

To load data from Microsoft Fabric Warehouse efficiently by using data partitioning, learn more from Parallel copy from Microsoft Fabric Warehouse.

To copy data from Microsoft Fabric Warehouse, set the type property in the Copy Activity source to WarehouseSource. The following properties are supported in the Copy Activity source section:

Property	Description	Required
type	The type property of the Copy Activity source must be set to WarehouseSource.	Yes
sqlReaderQuery	Use the custom SQL query to read data. Example: `select * from MyTable`.	No
sqlReaderStoredProcedureName	The name of the stored procedure that reads data from the source table. The last SQL statement must be a SELECT statement in the stored procedure.	No
storedProcedureParameters	Parameters for the stored procedure. Allowed values are name or value pairs. Names and casing of parameters must match the names and casing of the stored procedure parameters.	No
queryTimeout	Specifies the timeout for query command execution. Default is 120 minutes.	No
isolationLevel	Specifies the transaction locking behavior for the SQL source. The allowed value is Snapshot. If not specified, the database's default isolation level is used. For more information, see system.data.isolationlevel.	No
partitionOptions	Specifies the data partitioning options used to load data from Microsoft Fabric Warehouse. Allowed values are: None (default), and DynamicRange. When a partition option is enabled (that is, not `None`), the degree of parallelism to concurrently load data from a Microsoft Fabric Warehouse is controlled by the `parallelCopies` setting on the copy activity.	No
partitionSettings	Specify the group of the settings for data partitioning. Apply when the partition option isn't `None`.	No
Under `partitionSettings`:
partitionColumnName	Specify the name of the source column in integer or date/datetime type (`int`, `smallint`, `bigint`, `date`, `datetime2`) that will be used by range partitioning for parallel copy. If not specified, the index or the primary key of the table is detected automatically and used as the partition column. Apply when the partition option is `DynamicRange`. If you use a query to retrieve the source data, hook `?DfDynamicRangePartitionCondition` in the WHERE clause. For an example, see the Parallel copy from Microsoft Fabric Warehouse section.	No
partitionUpperBound	The maximum value of the partition column for partition range splitting. This value is used to decide the partition stride, not for filtering the rows in table. All rows in the table or query result will be partitioned and copied. If not specified, copy activity auto detect the value. Apply when the partition option is `DynamicRange`. For an example, see the Parallel copy from Microsoft Fabric Warehouse section.	No
partitionLowerBound	The minimum value of the partition column for partition range splitting. This value is used to decide the partition stride, not for filtering the rows in table. All rows in the table or query result will be partitioned and copied. If not specified, copy activity auto detect the value. Apply when the partition option is `DynamicRange`. For an example, see the Parallel copy from Microsoft Fabric Warehouse section.	No

Note

When using stored procedure in source to retrieve data, note if your stored procedure is designed as returning different schema when different parameter value is passed in, you may encounter failure or see unexpected result when importing schema from UI or when copying data to Microsoft Fabric Warehouse with auto table creation.

Example: using SQL query

"activities":[
    {
        "name": "CopyFromMicrosoftFabricWarehouse",
        "type": "Copy",
        "inputs": [
            {
                "referenceName": "<Microsoft Fabric Warehouse input dataset name>",
                "type": "DatasetReference"
            }
        ],
        "outputs": [
            {
                "referenceName": "<output dataset name>",
                "type": "DatasetReference"
            }
        ],
        "typeProperties": {
            "source": {
                "type": "WarehouseSource",
                "sqlReaderQuery": "SELECT * FROM MyTable"
            },
            "sink": {
                "type": "<sink type>"
            }
        }
    }
]

Example: using stored procedure

"activities":[
    {
        "name": "CopyFromMicrosoftFabricWarehouse",
        "type": "Copy",
        "inputs": [
            {
                "referenceName": "<Microsoft Fabric Warehouse input dataset name>",
                "type": "DatasetReference"
            }
        ],
        "outputs": [
            {
                "referenceName": "<output dataset name>",
                "type": "DatasetReference"
            }
        ],
        "typeProperties": {
            "source": {
                "type": "WarehouseSource",
                "sqlReaderStoredProcedureName": "CopyTestSrcStoredProcedureWithParameters",
                "storedProcedureParameters": {
                    "stringData": { "value": "str3" },
                    "identifier": { "value": "$$Text.Format('{0:yyyy}', <datetime parameter>)", "type": "Int"}
                }
            },
            "sink": {
                "type": "<sink type>"
            }
        }
    }
]

Sample stored procedure:

CREATE PROCEDURE CopyTestSrcStoredProcedureWithParameters
(
    @stringData varchar(20),
    @identifier int
)
AS
SET NOCOUNT ON;
BEGIN
    select *
    from dbo.UnitTestSrcTable
    where dbo.UnitTestSrcTable.stringData != stringData
    and dbo.UnitTestSrcTable.identifier != identifier
END
GO

Microsoft Fabric Warehouse as a sink type

Azure Data Factory and Synapse pipelines support Use COPY statement to load data into Microsoft Fabric Warehouse.

To copy data to Microsoft Fabric Warehouse, set the sink type in Copy Activity to WarehouseSink. The following properties are supported in the Copy Activity sink section:

Property	Description	Required
type	The type property of the Copy Activity sink must be set to WarehouseSink.	Yes
allowCopyCommand	Indicates whether to use COPY statement to load data into Microsoft Fabric Warehouse. See Use COPY statement to load data into Microsoft Fabric Warehouse section for constraints and details. The allowed value is True.	Yes
copyCommandSettings	A group of properties that can be specified when `allowCopyCommand` property is set to TRUE.	No
writeBatchTimeout	This property specifies the wait time for the insert, upsert and stored procedure operation to complete before it times out. Allowed values are for the timespan. An example is "00:30:00" for 30 minutes. If no value is specified, the timeout defaults to "00:30:00"	No
preCopyScript	Specify a SQL query for Copy Activity to run before writing data into Microsoft Fabric Warehouse in each run. Use this property to clean up the preloaded data.	No
tableOption	Specifies whether to automatically create the sink table if not exists based on the source schema. Allowed values are: `none` (default), `autoCreate`.	No
disableMetricsCollection	The service collects metrics for copy performance optimization and recommendations, which introduce additional master DB access. If you are concerned with this behavior, specify `true` to turn it off.	No (default is `false`)

Example: Microsoft Fabric Warehouse sink

"activities":[
    {
        "name": "CopyToMicrosoftFabricWarehouse",
        "type": "Copy",
        "inputs": [
            {
                "referenceName": "<input dataset name>",
                "type": "DatasetReference"
            }
        ],
        "outputs": [
            {
                "referenceName": "<Microsoft Fabric Warehouse output dataset name>",
                "type": "DatasetReference"
            }
        ],
        "typeProperties": {
            "source": {
                "type": "<source type>"
            },
            "sink": {
                "type": "WarehouseSink",
                "allowCopyCommand": true,
                "tableOption": "autoCreate",
                "disableMetricsCollection": false
            }
        }
    }
]

Parallel copy from Microsoft Fabric Warehouse

The Microsoft Fabric Warehouse connector in copy activity provides built-in data partitioning to copy data in parallel. You can find data partitioning options on the Source tab of the copy activity.

Screenshot of partition options

When you enable partitioned copy, copy activity runs parallel queries against your Microsoft Fabric Warehouse source to load data by partitions. The parallel degree is controlled by the parallelCopies setting on the copy activity. For example, if you set parallelCopies to four, the service concurrently generates and runs four queries based on your specified partition option and settings, and each query retrieves a portion of data from your Microsoft Fabric Warehouse.

You are suggested to enable parallel copy with data partitioning especially when you load large amount of data from your Microsoft Fabric Warehouse. The following are suggested configurations for different scenarios. When copying data into file-based data store, it's recommended to write to a folder as multiple files (only specify folder name), in which case the performance is better than writing to a single file.

Scenario Suggested settings

Full load from large table, while with an integer or datetime column for data partitioning. Partition options: Dynamic range partition.
Partition column (optional): Specify the column used to partition data. If not specified, the index or primary key column is used.
Partition upper bound and partition lower bound (optional): Specify if you want to determine the partition stride. This is not for filtering the rows in table, and all rows in the table will be partitioned and copied. If not specified, copy activity auto detect the values.

For example, if your partition column "ID" has values range from 1 to 100, and you set the lower bound as 20 and the upper bound as 80, with parallel copy as 4, the service retrieves data by 4 partitions - IDs in range <=20, [21, 50], [51, 80], and >=81, respectively.

Load a large amount of data by using a custom query, while with an integer or date/datetime column for data partitioning. Partition options: Dynamic range partition.
Query: SELECT * FROM <TableName> WHERE ?DfDynamicRangePartitionCondition AND <your_additional_where_clause>.
Partition column: Specify the column used to partition data.
Partition upper bound and partition lower bound (optional): Specify if you want to determine the partition stride. This is not for filtering the rows in table, and all rows in the query result will be partitioned and copied. If not specified, copy activity auto detect the value.

For example, if your partition column "ID" has values range from 1 to 100, and you set the lower bound as 20 and the upper bound as 80, with parallel copy as 4, the service retrieves data by 4 partitions- IDs in range <=20, [21, 50], [51, 80], and >=81, respectively.

Here are more sample queries for different scenarios:
1. Query the whole table:
SELECT * FROM <TableName> WHERE ?DfDynamicRangePartitionCondition
2. Query from a table with column selection and additional where-clause filters:
SELECT <column_list> FROM <TableName> WHERE ?DfDynamicRangePartitionCondition AND <your_additional_where_clause>
3. Query with subqueries:
SELECT <column_list> FROM (<your_sub_query>) AS T WHERE ?DfDynamicRangePartitionCondition AND <your_additional_where_clause>
4. Query with partition in subquery:
SELECT <column_list> FROM (SELECT <your_sub_query_column_list> FROM <TableName> WHERE ?DfDynamicRangePartitionCondition) AS T

Scenario	Suggested settings
Full load from large table, while with an integer or datetime column for data partitioning.	Partition options: Dynamic range partition. Partition column (optional): Specify the column used to partition data. If not specified, the index or primary key column is used. Partition upper bound and partition lower bound (optional): Specify if you want to determine the partition stride. This is not for filtering the rows in table, and all rows in the table will be partitioned and copied. If not specified, copy activity auto detect the values. For example, if your partition column "ID" has values range from 1 to 100, and you set the lower bound as 20 and the upper bound as 80, with parallel copy as 4, the service retrieves data by 4 partitions - IDs in range <=20, [21, 50], [51, 80], and >=81, respectively.
Load a large amount of data by using a custom query, while with an integer or date/datetime column for data partitioning.	Partition options: Dynamic range partition. Query: `SELECT * FROM <TableName> WHERE ?DfDynamicRangePartitionCondition AND <your_additional_where_clause>`. Partition column: Specify the column used to partition data. Partition upper bound and partition lower bound (optional): Specify if you want to determine the partition stride. This is not for filtering the rows in table, and all rows in the query result will be partitioned and copied. If not specified, copy activity auto detect the value. For example, if your partition column "ID" has values range from 1 to 100, and you set the lower bound as 20 and the upper bound as 80, with parallel copy as 4, the service retrieves data by 4 partitions- IDs in range <=20, [21, 50], [51, 80], and >=81, respectively. Here are more sample queries for different scenarios: 1. Query the whole table: `SELECT * FROM <TableName> WHERE ?DfDynamicRangePartitionCondition` 2. Query from a table with column selection and additional where-clause filters: `SELECT <column_list> FROM <TableName> WHERE ?DfDynamicRangePartitionCondition AND <your_additional_where_clause>` 3. Query with subqueries: `SELECT <column_list> FROM (<your_sub_query>) AS T WHERE ?DfDynamicRangePartitionCondition AND <your_additional_where_clause>` 4. Query with partition in subquery: `SELECT <column_list> FROM (SELECT <your_sub_query_column_list> FROM <TableName> WHERE ?DfDynamicRangePartitionCondition) AS T`

Best practices to load data with partition option:

Choose distinctive column as partition column (like primary key or unique key) to avoid data skew.
If you use Azure Integration Runtime to copy data, you can set larger "Data Integration Units (DIU)" (>4) to utilize more computing resource. Check the applicable scenarios there.
"Degree of copy parallelism" control the partition numbers, setting this number too large sometime hurts the performance, recommend setting this number as (DIU or number of Self-hosted IR nodes) * (2 to 4).
Note that Microsoft Fabric Warehouse can execute a maximum of 32 queries at a moment, setting "Degree of copy parallelism" too large may cause a Warehouse throttling issue.

Example: query with dynamic range partition

"source": {
    "type": "WarehouseSource",
    "query": "SELECT * FROM <TableName> WHERE ?DfDynamicRangePartitionCondition AND <your_additional_where_clause>",
    "partitionOption": "DynamicRange",
    "partitionSettings": {
        "partitionColumnName": "<partition_column_name>",
        "partitionUpperBound": "<upper_value_of_partition_column (optional) to decide the partition stride, not as data filter>",
        "partitionLowerBound": "<lower_value_of_partition_column (optional) to decide the partition stride, not as data filter>"
    }
}

Use COPY statement to load data into Microsoft Fabric Warehouse

Using COPY statement is a simple and flexible way to load data into Microsoft Fabric Warehouse with high throughput. To learn more details, check Bulk load data using the COPY statement

If your source data is in Azure Blob or Azure Data Lake Storage Gen2, and the format is COPY statement compatible, you can use copy activity to directly invoke COPY statement to let Microsoft Fabric Warehouse pull the data from source. For details, see Direct copy by using COPY statement.
If your source data store and format isn't originally supported by COPY statement, use the Staged copy by using COPY statement feature instead. The staged copy feature also provides you with better throughput. It automatically converts the data into COPY statement compatible format, stores the data in Azure Blob storage, then calls COPY statement to load data into Microsoft Fabric Warehouse.

Tip

When using COPY statement with Azure Integration Runtime, effective Data Integration Units (DIU) is always 2. Tuning the DIU doesn't impact the performance.

Direct copy by using COPY statement

Microsoft Fabric Warehouse COPY statement directly supports Azure Blob, Azure Data Lake Storage Gen1 and Azure Data Lake Storage Gen2. If your source data meets the criteria described in this section, use COPY statement to copy directly from the source data store to Microsoft Fabric Warehouse. Otherwise, use Staged copy by using COPY statement. The service checks the settings and fails the copy activity run if the criteria is not met.

The source linked service and format are with the following types and authentication methods:

Supported source data store type	Supported format	Supported source authentication type
Azure Blob	Delimited text	Account key authentication, shared access signature authentication
	Parquet	Account key authentication, shared access signature authentication
Azure Data Lake Storage Gen2	Delimited text Parquet	Account key authentication, shared access signature authentication

Format settings are with the following:
- For Parquet: compression can be no compression, Snappy, or GZip.
- For Delimited text:
  - rowDelimiter is explicitly set as single character or "\r\n", the default value is not supported.
  - nullValue is left as default or set to empty string ("").
  - encodingName is left as default or set to utf-8 or utf-16.
  - escapeChar must be same as quoteChar, and is not empty.
  - skipLineCount is left as default or set to 0.
  - compression can be no compression or GZip.
If your source is a folder, recursive in copy activity must be set to true, and wildcardFilename need to be * or *.*.
wildcardFolderPath , wildcardFilename (other than *or *.*), modifiedDateTimeStart, modifiedDateTimeEnd, prefix, enablePartitionDiscovery and additionalColumns are not specified.

The following COPY statement settings are supported under allowCopyCommand in copy activity:

Property	Description	Required
defaultValues	Specifies the default values for each target column in Microsoft Fabric Warehouse. The default values in the property overwrite the DEFAULT constraint set in the data warehouse, and identity column cannot have a default value.	No
additionalOptions	Additional options that will be passed to a Microsoft Fabric Warehouse COPY statement directly in "With" clause in COPY statement. Quote the value as needed to align with the COPY statement requirements.	No

"activities":[
    {
        "name": "CopyFromAzureBlobToMicrosoftFabricWarehouseViaCOPY",
        "type": "Copy",
        "inputs": [
            {
                "referenceName": "ParquetDataset",
                "type": "DatasetReference"
            }
        ],
        "outputs": [
            {
                "referenceName": "MicrosoftFabricWarehouseDataset",
                "type": "DatasetReference"
            }
        ],
        "typeProperties": {
            "source": {
                "type": "ParquetSource",
                "storeSettings":{
                    "type": "AzureBlobStorageReadSettings",
                    "recursive": true
                }
            },
            "sink": {
                "type": "WarehouseSink",
                "allowCopyCommand": true,
                "copyCommandSettings": {
                    "defaultValues": [
                        {
                            "columnName": "col_string",
                            "defaultValue": "DefaultStringValue"
                        }
                    ],
                    "additionalOptions": {
                        "MAXERRORS": "10000",
                        "DATEFORMAT": "'ymd'"
                    }
                }
            },
            "enableSkipIncompatibleRow": true
        }
    }
]

Staged copy by using COPY statement

When your source data is not natively compatible with COPY statement, enable data copying via an interim staging Azure Blob or Azure Data Lake Storage Gen2 (it can't be Azure Premium Storage). In this case, the service automatically converts the data to meet the data format requirements of COPY statement. Then it invokes COPY statement to load data into Microsoft Fabric Warehouse. Finally, it cleans up your temporary data from the storage. See Staged copy for details about copying data via a staging.

To use this feature, create an Azure Blob Storage linked service or Azure Data Lake Storage Gen2 linked service with account key or system-managed identity authentication that refers to the Azure storage account as the interim storage.

Important

When you use managed identity authentication for your staging linked service, learn the needed configurations for Azure Blob and Azure Data Lake Storage Gen2 respectively.
If your staging Azure Storage is configured with VNet service endpoint, you must use managed identity authentication with "allow trusted Microsoft service" enabled on storage account, refer to Impact of using VNet Service Endpoints with Azure storage.

Important

If your staging Azure Storage is configured with Managed Private Endpoint and has the storage firewall enabled, you must use managed identity authentication and grant Storage Blob Data Reader permissions to the Synapse SQL Server to ensure it can access the staged files during the COPY statement load.

"activities":[
    {
        "name": "CopyFromSQLServerToMicrosoftFabricWarehouseViaCOPYstatement",
        "type": "Copy",
        "inputs": [
            {
                "referenceName": "SQLServerDataset",
                "type": "DatasetReference"
            }
        ],
        "outputs": [
            {
                "referenceName": "MicrosoftFabricWarehouseDataset",
                "type": "DatasetReference"
            }
        ],
        "typeProperties": {
            "source": {
                "type": "SqlSource",
            },
            "sink": {
                "type": "WarehouseSink",
                "allowCopyCommand": true
            },
            "stagingSettings": {
                "linkedServiceName": {
                    "referenceName": "MyStagingStorage",
                    "type": "LinkedServiceReference"
                }
            }
        }
    }
]

Mapping data flow properties

When transforming data in mapping data flow, you can read and write to tables from Microsoft Fabric Warehouse. For more information, see the source transformation and sink transformation in mapping data flows.

Microsoft Fabric Warehouse as the source

Settings specific to Microsoft Fabric Warehouse are available in the Source Options tab of the source transformation.

Name	Description	Required	Allowed Values	Data flow script property
Input	Select whether you point your source at a table (equivalent of Select * from tablename) or enter a custom SQL query or retrieve data from a Stored Procedure. Query: If you select Query in the input field, enter a SQL query for your source. This setting overrides any table that you've chosen in the dataset. Order By clauses aren't supported here, but you can set a full SELECT FROM statement. You can also use user-defined table functions. *select from udfGetData()** is a UDF in SQL that returns a table. This query will produce a source table that you can use in your data flow. Using queries is also a great way to reduce rows for testing or for lookups.SQL Example: `Select * from MyTable where customerId > 1000 and customerId < 2000`	Yes	Table or Query or Stored Procedure	format: 'table'
Batch size	Enter a batch size to chunk large data into reads. In data flows, this setting will be used to set Spark columnar caching. This is an option field, which will use Spark defaults if it is left blank.	No	Numeral values	batchSize: 1234
Isolation Level	The default for SQL sources in mapping data flow is read uncommitted. You can change the isolation level here to one of these values:• Read Committed • Read Uncommitted • Repeatable Read • Serializable • None (ignore isolation level)	Yes	• Read Committed • Read Uncommitted • Repeatable Read • Serializable • None (ignore isolation level)	isolationLevel

Note

Read via staging is not supported. CDC support for Microsoft Fabric Warehouse source is currently not available.

Microsoft Fabric Warehouse as the sink

Settings specific to Microsoft Fabric Warehouse are available in the Settings tab of the sink transformation.

Name	Description	Required	Allowed Values	Data flow script property
Update method	Determines what operations are allowed on your database destination. The default is to only allow inserts. To update, upsert, or delete rows, an alter-row transformation is required to tag rows for those actions. For updates, upserts and deletes, a key column or columns must be set to determine which row to alter.	Yes	true or false	insertable deletable upsertable updateable
Table action	Determines whether to recreate or remove all rows from the destination table prior to writing.• None: No action will be done to the table. • Recreate: The table will get dropped and recreated. Required if creating a new table dynamically.• Truncate: All rows from the target table will get removed.	No	None or recreate or truncate	recreate: true truncate: true
Enable staging	The staging storage is configured in Execute Data Flow activity. When you use managed identity authentication for your storage linked service, learn the needed configurations for Azure Blob and Azure Data Lake Storage Gen2 respectively.If your Azure Storage is configured with VNet service endpoint, you must use managed identity authentication with "allow trusted Microsoft service" enabled on storage account, refer to Impact of using VNet Service Endpoints with Azure storage.	No	true or false	staged: true
Batch size	Controls how many rows are being written in each bucket. Larger batch sizes improve compression and memory optimization, but risk out of memory exceptions when caching data.	No	Numeral values	batchSize: 1234
Use sink schema	By default, a temporary table will be created under the sink schema as staging. You can alternatively uncheck the Use sink schema option and instead, in Select user DB schema, specify a schema name under which Data Factory will create a staging table to load upstream data and automatically clean them up upon completion. Make sure you have create table permission in the database and alter permission on the schema.	No	true or false	stagingSchemaName
Pre and Post SQL scripts	Enter multi-line SQL scripts that will execute before (pre-processing) and after (post-processing) data is written to your Sink database	No	SQL scripts	preSQLs:['set IDENTITY_INSERT mytable ON'] postSQLs:['set IDENTITY_INSERT mytable OFF'],

Error row handling

By default, a data flow run will fail on the first error it gets. You can choose to Continue on error that allows your data flow to complete even if individual rows have errors. The service provides different options for you to handle these error rows.

Transaction Commit: Choose whether your data gets written in a single transaction or in batches. Single transaction will provide better performance and no data written will be visible to others until the transaction completes. Batch transactions have worse performance but can work for large datasets.

Output rejected data: If enabled, you can output the error rows into a csv file in Azure Blob Storage or an Azure Data Lake Storage Gen2 account of your choosing. This will write the error rows with three additional columns: the SQL operation like INSERT or UPDATE, the data flow error code, and the error message on the row.

Report success on error: If enabled, the data flow will be marked as a success even if error rows are found.

Note

For Microsoft Fabric Warehouse Linked Service, the supported authentication type for Service Principal is 'Key'; 'Certificate' authentication is not supported.

Lookup activity properties

To learn details about the properties, check Lookup activity.

GetMetadata activity properties

To learn details about the properties, check GetMetadata activity

Data type mapping for Microsoft Fabric Warehouse

When you copy data from Microsoft Fabric Warehouse, the following mappings are used from Microsoft Fabric Warehouse data types to interim data types within the service internally. To learn about how the copy activity maps the source schema and data type to the sink, see Schema and data type mappings.

Microsoft Fabric Warehouse data type	Data Factory interim data type
bigint	Int64
binary	Byte[]
bit	Boolean
char	String, Char[]
date	DateTime
datetime2	DateTime
Decimal	Decimal
FILESTREAM attribute (varbinary(max))	Byte[]
Float	Double
int	Int32
numeric	Decimal
real	Single
smallint	Int16
time	TimeSpan
uniqueidentifier	Guid
varbinary	Byte[]
varchar	String, Char[]

Next steps

For a list of data stores supported as sources and sinks by the copy activity, see Supported data stores.

Comhroinn trí

Copy and transform data in Microsoft Fabric Warehouse using Azure Data Factory or Azure Synapse Analytics

Supported capabilities

Get started

Create a Microsoft Fabric Warehouse linked service using UI

Connector configuration details

Linked service properties

Service principal authentication

Dataset properties

Dataset properties example

Copy activity properties

Microsoft Fabric Warehouse as the source

Example: using SQL query

Example: using stored procedure

Sample stored procedure:

Microsoft Fabric Warehouse as a sink type

Example: Microsoft Fabric Warehouse sink

Parallel copy from Microsoft Fabric Warehouse

Use COPY statement to load data into Microsoft Fabric Warehouse

Direct copy by using COPY statement

Staged copy by using COPY statement

Mapping data flow properties

Microsoft Fabric Warehouse as the source

Microsoft Fabric Warehouse as the sink

Error row handling

Lookup activity properties

GetMetadata activity properties

Data type mapping for Microsoft Fabric Warehouse

Next steps

Aiseolas

Acmhainní breise