Configure DNS servers for reverse lookup resolution for OT monitoring
This procedure describes how to enhance device data enrichment in Microsoft Defender for IoT by configuring multiple DNS servers to carryout reverse lookups.
Use reverse DNS lookup to resolve host names or FQDNs associated with the IP addresses detected in network subnets. For example, if a sensor discovers an IP address, it might query multiple DNS servers to resolve the host name. Host names appear in the Defender for IoT device inventory, device map, and reports.
All CIDR formats are supported.
Prerequisites
Before performing the procedures in this article, you must have:
An OT network sensor installed, configured, and activated.
Access to your OT network sensor as an Admin user. For more information, see On-premises users and roles for OT monitoring with Defender for IoT.
Completed the prerequisites outlined in Configure active monitoring for OT networks, and confirmed that active monitoring is right for your network.
Define DNS servers
On your OT sensor console, select System settings > Network monitoring and under Active Discovery, select Reverse DNS Lookup.
Use the Schedule Reverse Lookup options to define your scan as in fixed intervals, per hour, or at a specific time.
If you select By specific times, use a 24-hour clock, such as 14:30 for 2:30 PM. Select the + button on the side to add additional, specific times that you want the lookup to run.
Select Add DNS Server, and then populate your fields as needed to define the following fields:
- DNS server address, which is the DNS server IP address
- DNS server port
- Number of labels, which is the number of domain labels you want to display. To get this value, resolve the network IP address to device FQDNs. You can enter up to 30 characters in this field.
- Subnets, which is the subnets that you want the DNS server to query
Toggle on the Enabled option at the top to start the reverse lookup query as scheduled, and then select Save to finish the configuration.
Test the DNS configuration
Use a test device to verify that the reverse DNS lookup settings you'd defined work as expected.
On your sensor console, select System settings > Network monitoring and under Active Discovery, select Reverse DNS Lookup.
Make sure that the Enabled toggle is selected.
Select Test.
In the DNS reverse lookup test for server dialog, enter an address in the Lookup Address and then select Test.
Next steps
For more information, see: