संपादित करें

इसके माध्यम से साझा किया गया


Create a task sequence to capture an OS

Applies to: Configuration Manager (current branch)

When you use a task sequence to deploy an OS to a computer in Configuration Manager, the computer installs the OS image that you specify in the task sequence. You can customize the OS image so it includes specific applications and software updates. First use a build and capture task sequence to build a reference computer. Then capture the OS image from that reference computer. If you already have a reference computer available to capture, create a custom task sequence to capture the OS.

Note

To avoid potential hardware driver issues when deploying custom reference images to different model devices, it is recommended to create custom reference images using virtual machines (VMs). This minimizes the amount of potentially conflicting drivers that are included as part of the custom reference image. Additionally it is recommended not to add any drivers to the custom reference image via either the Auto Apply Drivers task or the Apply Driver Package task.

About the build and capture task sequence

The build and capture task sequence:

  • Partitions and formats the reference computer
  • Installs the OS
  • Installs the Configuration Manager client
  • Installs applications
  • Applies software updates
  • Captures the OS from the reference computer

The packages associated with the task sequence, such as applications, must be available on distribution points before you deploy the build and capture task sequence.

Requirements

Before you create a task sequence to install an OS, make sure the following components are in place:

Required

Required (if used)

Create a build and capture task sequence

Use the following procedure to use a task sequence to build a reference computer and capture the OS.

  1. In the Configuration Manager console, go to the Software Library workspace, expand Operating Systems, and then select the Task Sequences node.

  2. On the Home tab of the ribbon, in the Create group, select Create Task Sequence to start the Create Task Sequence Wizard.

  3. On the Create a New Task Sequence page, select Build and capture a reference operating system image.

  4. On the Task Sequence Information page, specify the following settings:

    • Task sequence name: Specify a name that identifies the task sequence.

    • Description: Specify an optional description for the task sequence. For example, describe the OS that the task sequence creates.

    • Boot image: Specify the boot image to use with this task sequence.

      Important

      The architecture of the boot image must be compatible with the hardware architecture of the destination computer.

  5. On the Install Windows page, specify the following settings:

    • Image package: Specify the OS image package, which contains the required files to install the OS.

    • Image index: Specify the index of the OS to install in the image. If the OS image contains multiple versions, select the version that you want to install.

    • Product key: If necessary, specify the product key for the Windows OS to install. You can specify encoded volume license keys and standard product keys. If you use a non-encoded product key, separate each group of five characters with a dash (-). For example: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

    • Server licensing mode: If necessary, specify that the server license is Per seat, Per server, or that no license is specified. If the server license is Per server, also specify the maximum number of server connections.

    • Specify how to configure the administrator account for the deployed OS:

      • Randomly generate the local administrator password and disable the account on all supported platforms: Create a random password for the local administrator account. Disable the account when the Windows is set up.

      • Enable the account and specify the local administrator password: Use the same password for the local administrator account on all computers where you deploy this OS.

  6. On the Configure Network page, specify the following settings:

    • Join a workgroup: Specify whether to add the destination computer to a workgroup when the OS is deployed.

    • Join a domain: Specify whether to add the destination computer to a domain when the OS is deployed. In Domain, specify the name of the domain.

      Important

      You can browse to locate domains in the local forest. Specify the domain name for a remote forest.

      You can also specify an organizational unit (OU). This setting is optional, and specifies the LDAP X.500 distinguished name of the OU in which to create the computer account, if it doesn't already exist.

    • Account: Specify the user name and password for the account that has permissions to join the specified domain. For example: domain\user or %variable%.

      Important

      If you plan to migrate either the domain settings or the workgroup settings during the deployment, make sure you enter the appropriate domain credentials here.

  7. On the Install Configuration Manager page, specify the Configuration Manager client package. This package contains the source files to install the Configuration Manager client. Also specify any additional properties needed to install the client.

    For more information, see About client installation properties.

  8. On the Include Updates page, specify whether to install required software updates, all software updates, or no software updates. If you specify to install software updates, Configuration Manager installs only those software updates that are targeted to the collections that the destination computer is a member of.

  9. On the Install Applications page, specify the applications to install on the destination computer. If you specify multiple applications, you can also specify that the task sequence continues if the installation of a specific application fails.

    Note

    The System Preparation page appears next in the wizard, but it's no longer used. Select Next to continue.

  10. On the Images Properties page, specify the following settings for the OS image:

    • Created by: Specify the name of the user to note as the creator of the OS image.

    • Version: Specify your version number that's associated with the OS image. This attribute doesn't need to be the OS version, as the site stores that value separately.

    • Description: Specify your description of the OS image.

  11. On the Capture Image page, specify the following settings:

    • Path: Specify a shared network folder where Configuration Manager should store the output image file (.wim). This file contains the OS image that's based on the settings you specify in this wizard. If you specify a folder that contains an existing .WIM file, it's overwritten.

    • Account: Specify the Windows account that has permissions to the network share where the image is stored.

  12. Complete the wizard.

To add additional steps to the task sequence, select it, and choose Edit. For more information about how to edit a task sequence, see Use the task sequence editor.

Deploy the task sequence to a reference computer in one of the following ways:

  • If the reference computer is already a Configuration Manager client, deploy the build and capture task sequence to a collection that contains the reference computer. For more information, see Deploy a task sequence.

  • If the reference computer isn't a Configuration Manager client, or if you want to manually run the task sequence on the reference computer, use the Create Task Sequence Media Wizard to create bootable media. For more information, see Create bootable media.

After you capture the image, you can deploy it to other computers. For more information about how to deploy the captured OS image, see Create a task sequence to install an OS.

Capture from an existing reference computer

When you already have a reference computer ready to capture, create a task sequence that only captures the OS from the reference computer. Use the Capture Operating System Image task sequence step to capture one or more images from a reference computer and store them in an image file (.wim) on the specified network share. Start the reference computer in Windows PE with a boot image. The task sequence captures each hard drive on the reference computer as a separate image within the .wim file. If the referenced computer has multiple drives, the resulting .wim file contains a separate image for each volume. It only captures volumes that are formatted as NTFS or FAT32. It skips volumes with other formats or USB volumes.

Use the following procedure to capture an OS image from an existing reference computer:

  1. In the Configuration Manager console, go to the Software Library workspace, expand Operating Systems, and then select the Task Sequences node.

  2. On the Home tab of the ribbon, in the Create group, select Create Task Sequence. This action starts the Create Task Sequence Wizard.

  3. On the Create a New Task Sequence page, select Create a new custom task sequence.

  4. On the Task Sequence Information page, specify a name for the task sequence. Optionally add a description for the task sequence.

  5. Specify a boot image for the task sequence. Configuration Manager uses this boot image to start the reference computer with Windows PE. For more information, see Manage boot images.

  6. Complete the wizard.

  7. In the Task Sequences node, select the new task sequence. Then on the Home tab of the ribbon, in the Task Sequence group, select Edit. This action opens the task sequence editor.

  8. If the Configuration Manager client is installed on the reference computer:

    Go to the Add menu, select Images, and then choose Prepare ConfigMgr Client for Capture. This step generalizes the Configuration Manager client on the reference computer.

    Note

    The task sequence doesn't support uninstalling the Configuration Manager client.

  9. Go to the Add menu, select Images, and choose Prepare Windows for Capture. This step runs Sysprep, and then restarts the computer to the Windows PE boot image specified for the task sequence. For this action to complete successfully, don't join the reference computer to a domain.

  10. Go to the Add menu, select Images, and choose Capture Operating System Image. This step only runs from Windows PE to capture the hard drives on the reference computer. Configure the following settings:

    • Name and Description: Optionally, you can change the name of the task sequence step and provide a description.

    • Destination: Specify a shared network folder where the output .WIM file is stored. This file contains the OS image based on the settings that you specify by using this wizard. If you specify a folder that contains an existing .WIM file, it's overwritten.

    • Description, Version, and Created by: Optionally, provide details about the image to capture.

    • Capture operating system image account: Specify the Windows account that has permissions to the network share you specified. Select Set to specify the name of that Windows account.

Select OK to save your changes and close the task sequence editor.

Deploy the task sequence to a reference computer in one of the following ways:

  • If the reference computer is already a Configuration Manager client, deploy the capture task sequence to a collection that contains the reference computer. For more information, see Deploy a task sequence.

  • If the reference computer isn't a Configuration Manager client, or if you want to manually run the task sequence on the reference computer, use the Create Task Sequence Media Wizard to create capture media. For more information, see Create capture media.

After you capture the image, you can deploy it to other computers. For more information about how to deploy the captured OS image, see Create a task sequence to install an OS.

Example task sequence

Use the following table as a guide as you create a task sequence that builds and captures an OS image. The table helps you decide the general sequence for your task sequence steps, and how to organize and structure those steps into logical groups. The task sequence that you create may vary from this sample. It can contain more or less steps and groups.

Note

Always use the Create Task Sequence Wizard to create this type of task sequence.

The wizard adds steps to the task sequence with slightly different names that what you'd see if you manually add the same steps.

Group: Build the Reference Machine

This group contains the actions necessary to build a reference computer.

Task sequence step Description
Restart in Windows PE Restart the destination computer to the boot image assigned to the task sequence. This step displays a message to the user that the computer will be restarted so that the installation can continue.

This step uses the read-only _SMSTSInWinPE task sequence variable. If the associated value equals false, then the task sequence step continues.
Partition Disk 0 - BIOS Partition and format the hard drive on the destination computer in BIOS mode. The default disk number is 0.

This step uses several read-only task sequence variables. For example, it only runs if the Configuration Manager client cache doesn't exist, and doesn't run if the computer is configured for UEFI.
Partition Disk 0 - UEFI Partition and format the hard drive on the destination computer in UEFI mode. The default disk number is 0.

This step uses several read-only task sequence variables. For example, it only runs if the Configuration Manager client cache doesn't exist, and only runs if the computer is configured for UEFI.
Apply Operating System Install the specified OS image on the destination computer. This step first deletes all files on the volume, other than Configuration Manager-specific control files. It then applies all volume images contained in the WIM file to the corresponding sequential disk volume on the target computer.
Apply Windows Settings Configure the Windows settings for the destination computer.
Apply Network Settings Specify the network or workgroup configuration information for the destination computer.
Apply Device Drivers Match and install drivers as part of this OS deployment. For more information, see Auto Apply Drivers.

This step uses the read-only _SMSTSMediaType task sequence variable. If the associated value doesn't equal FullMedia, this step doesn't run.
Setup Windows and Configuration Manager Install the Configuration Manager client software. Configuration Manager installs and registers the Configuration Manager client GUID. Include any necessary Installation properties.
Install Updates Specify how software updates are installed on the destination computer. The destination computer isn't evaluated for applicable software updates until this step runs. At that point, the evaluation is similar to any other Configuration Manager-managed client. For more information, see Install Software Updates.

This step uses the read-only _SMSTSMediaType task sequence variable. If the associated value doesn't equal FullMedia, this step doesn't run.
Install Applications Specifies any applications to install on the reference computer.

Group: Capture the Reference Machine

This group contains the necessary steps to prepare and capture a reference computer.

Task sequence step Description
Prepare Configuration Manager Client Generalize the Configuration Manager client on the reference computer.
Prepare OS Runs Sysprep to generalize Windows. It then restarts the computer into the Windows PE boot image specified for the task sequence.
Capture the Reference Machine Captures the image to the specified network share and .WIM file.

Important

After you capture an image from a reference computer, don't capture another OS image from the reference computer. Registry entries are created during the initial configuration. Create a new reference computer each time that you capture the OS image. If you plan to use the same reference computer to create future OS images, first uninstall and reinstall the Configuration Manager client.

Next steps

Methods to deploy enterprise operating systems