Nota
L'accesso a questa pagina richiede l'autorizzazione. È possibile provare ad accedere o modificare le directory.
L'accesso a questa pagina richiede l'autorizzazione. È possibile provare a modificare le directory.
I modelli di callback e di polling per la gestione delle operazioni asincrone sono utili quando l'applicazione elabora solo un'operazione asincrona alla volta. I modelli di attesa offrono un metodo più flessibile per l'elaborazione di più operazioni asincrone. Sono disponibili due modelli di attesa, denominati in base ai metodi WaitHandle usati per implementarli: il modello Wait (Any) e il modello Wait (All).
Per usare uno dei due modelli di attesa, è necessario usare la proprietà AsyncWaitHandle dell'oggetto IAsyncResult restituito dai metodi BeginExecuteNonQuery, BeginExecuteReader o BeginExecuteXmlReader. Per i metodi WaitAny e WaitAll è necessario inviare gli oggetti WaitHandle come argomento, raggruppati in una matrice.
Entrambi i metodi di attesa monitorano le operazioni asincrone, in attesa del completamento. Il metodo WaitAny attende il completamento o il timeout di una delle operazioni. Una volta completata un'operazione specifica, è possibile elaborarne i risultati e quindi continuare ad attendere il completamento o il timeout dell'operazione successiva. Il metodo WaitAll attende il completamento o il timeout di tutti i processi nella matrice di istanze WaitHandle prima di continuare.
Il vantaggio dei modelli di attesa è più evidente quando è necessario eseguire più operazioni di una certa lunghezza su server diversi o quando il server è abbastanza potente da elaborare tutte le query nello stesso momento. Negli esempi presentati di seguito, tre query emulano processi di lunga durata aggiungendo comandi WAITFOR di lunghezza variabile a query SELECT irrilevanti.
Esempio: modello Wait (Any)
Nell'esempio seguente è illustrato il modello Wait (Any). Dopo l'avvio di tre processi asincroni, viene chiamato il metodo WaitAny per attendere il completamento di ognuno di essi. Al termine di ogni processo, viene chiamato il metodo EndExecuteReader e viene letto l'oggetto SqlDataReader risultante. A questo punto, un'applicazione reale probabilmente userebbe SqlDataReader per popolare una parte della pagina. In questo semplice esempio l'ora in cui il processo è stato completato viene aggiunta a una casella di testo corrispondente al processo. Se si osservano assieme, le ore nelle caselle di testo illustrano il punto: il codice viene eseguito ogni volta che un processo viene completato.
Per impostare questo esempio, creare un nuovo progetto di sito Web ASP.NET. Inserire un controllo Button e quattro controlli TextBox nella pagina, accettando il nome predefinito per ogni controllo.
Aggiungere il codice seguente alla classe del modulo, modificando la stringa di connessione in base alle esigenze dell'ambiente.
// Add the following using statements, if they are not already there.
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Threading;
using Microsoft.Data.SqlClient;
// Add this code to the page's class
string GetConnectionString()
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
// If you have not included "Asynchronous Processing=true"
// in the connection string, the command will not be able
// to execute asynchronously.
{
return "Data Source=(local);Integrated Security=SSPI;" +
"Initial Catalog=AdventureWorks;" +
"Asynchronous Processing=true";
}
void Button1_Click(object sender, System.EventArgs e)
{
// In a real-world application, you might be connecting to
// three different servers or databases. For the example,
// we connect to only one.
SqlConnection connection1 =
new SqlConnection(GetConnectionString());
SqlConnection connection2 =
new SqlConnection(GetConnectionString());
SqlConnection connection3 =
new SqlConnection(GetConnectionString());
// To keep the example simple, all three asynchronous
// processes select a row from the same table. WAITFOR
// commands are used to emulate long-running processes
// that complete after different periods of time.
string commandText1 = "WAITFOR DELAY '0:0:01';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
string commandText2 = "WAITFOR DELAY '0:0:05';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
string commandText3 = "WAITFOR DELAY '0:0:10';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
try
// For each process, open a connection and begin
// execution. Use the IAsyncResult object returned by
// BeginExecuteReader to add a WaitHandle for the
// process to the array.
{
connection1.Open();
SqlCommand command1 =
new SqlCommand(commandText1, connection1);
IAsyncResult result1 = command1.BeginExecuteReader();
WaitHandle waitHandle1 = result1.AsyncWaitHandle;
connection2.Open();
SqlCommand command2 =
new SqlCommand(commandText2, connection2);
IAsyncResult result2 = command2.BeginExecuteReader();
WaitHandle waitHandle2 = result2.AsyncWaitHandle;
connection3.Open();
SqlCommand command3 =
new SqlCommand(commandText3, connection3);
IAsyncResult result3 = command3.BeginExecuteReader();
WaitHandle waitHandle3 = result3.AsyncWaitHandle;
WaitHandle[] waitHandles = {
waitHandle1, waitHandle2, waitHandle3
};
int index;
for (int countWaits = 0; countWaits <= 2; countWaits++)
{
// WaitAny waits for any of the processes to
// complete. The return value is either the index
// of the array element whose process just
// completed, or the WaitTimeout value.
index = WaitHandle.WaitAny(waitHandles,
60000, false);
// This example doesn't actually do anything with
// the data returned by the processes, but the
// code opens readers for each just to demonstrate
// the concept.
// Instead of using the returned data to fill the
// controls on the page, the example adds the time
// the process was completed to the corresponding
// text box.
switch (index)
{
case 0:
SqlDataReader reader1;
reader1 =
command1.EndExecuteReader(result1);
if (reader1.Read())
{
TextBox1.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader1.Close();
break;
case 1:
SqlDataReader reader2;
reader2 =
command2.EndExecuteReader(result2);
if (reader2.Read())
{
TextBox2.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader2.Close();
break;
case 2:
SqlDataReader reader3;
reader3 =
command3.EndExecuteReader(result3);
if (reader3.Read())
{
TextBox3.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader3.Close();
break;
case WaitHandle.WaitTimeout:
throw new Exception("Timeout");
break;
}
}
}
catch (Exception ex)
{
TextBox4.Text = ex.ToString();
}
connection1.Close();
connection2.Close();
connection3.Close();
}
Esempio: modello Wait (All)
Nell'esempio seguente è illustrato il modello Wait (All). Dopo l'avvio di tre processi asincroni, viene chiamato il metodo WaitAll per attendere il completamento o il timeout dei processi.
Come nell'esempio del modello Wait (Any), l'ora in cui il processo è stato completato viene aggiunta a una casella di testo corrispondente al processo. Nuovamente, le ore nelle caselle di testo illustrano il punto: il codice che segue il metodo WaitAny viene eseguito solo dopo il completamento di tutti i processi.
Per impostare questo esempio, creare un nuovo progetto di sito Web ASP.NET. Inserire un controllo Button e quattro controlli TextBox nella pagina, accettando il nome predefinito per ogni controllo.
Aggiungere il codice seguente alla classe del modulo, modificando la stringa di connessione in base alle esigenze dell'ambiente.
// Add the following using statements, if they are not already there.
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Threading;
using Microsoft.Data.SqlClient;
// Add this code to the page's class
string GetConnectionString()
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
// If you have not included "Asynchronous Processing=true"
// in the connection string, the command will not be able
// to execute asynchronously.
{
return "Data Source=(local);Integrated Security=SSPI;" +
"Initial Catalog=AdventureWorks;" +
"Asynchronous Processing=true";
}
void Button1_Click(object sender, System.EventArgs e)
{
// In a real-world application, you might be connecting to
// three different servers or databases. For the example,
// we connect to only one.
SqlConnection connection1 =
new SqlConnection(GetConnectionString());
SqlConnection connection2 =
new SqlConnection(GetConnectionString());
SqlConnection connection3 =
new SqlConnection(GetConnectionString());
// To keep the example simple, all three asynchronous
// processes execute UPDATE queries that result in
// no change to the data. WAITFOR
// commands are used to emulate long-running processes
// that complete after different periods of time.
string commandText1 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:01';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
string commandText2 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:05';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
string commandText3 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:10';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
try
// For each process, open a connection and begin
// execution. Use the IAsyncResult object returned by
// BeginExecuteReader to add a WaitHandle for the
// process to the array.
{
connection1.Open();
SqlCommand command1 =
new SqlCommand(commandText1, connection1);
IAsyncResult result1 = command1.BeginExecuteNonQuery();
WaitHandle waitHandle1 = result1.AsyncWaitHandle;
connection2.Open();
SqlCommand command2 =
new SqlCommand(commandText2, connection2);
IAsyncResult result2 = command2.BeginExecuteNonQuery();
WaitHandle waitHandle2 = result2.AsyncWaitHandle;
connection3.Open();
SqlCommand command3 =
new SqlCommand(commandText3, connection3);
IAsyncResult result3 = command3.BeginExecuteNonQuery();
WaitHandle waitHandle3 = result3.AsyncWaitHandle;
WaitHandle[] waitHandles = {
waitHandle1, waitHandle2, waitHandle3
};
bool result;
// WaitAll waits for all of the processes to
// complete. The return value is True if the processes
// all completed successfully, False if any process
// timed out.
result = WaitHandle.WaitAll(waitHandles, 60000, false);
if(result)
{
long rowCount1 =
command1.EndExecuteNonQuery(result1);
TextBox1.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
long rowCount2 =
command2.EndExecuteNonQuery(result2);
TextBox2.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
long rowCount3 =
command3.EndExecuteNonQuery(result3);
TextBox3.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
}
else
{
throw new Exception("Timeout");
}
}
catch (Exception ex)
{
TextBox4.Text = ex.ToString();
}
connection1.Close();
connection2.Close();
connection3.Close();
}