Semaphore.GetAccessControl Metodo
Definizione
Importante
Alcune informazioni sono relative alla release non definitiva del prodotto, che potrebbe subire modifiche significative prima della release definitiva. Microsoft non riconosce alcuna garanzia, espressa o implicita, in merito alle informazioni qui fornite.
Ottiene la sicurezza del controllo di accesso per un semaforo di sistema denominato.
public:
System::Security::AccessControl::SemaphoreSecurity ^ GetAccessControl();public System.Security.AccessControl.SemaphoreSecurity GetAccessControl ();member this.GetAccessControl : unit -> System.Security.AccessControl.SemaphoreSecurityPublic Function GetAccessControl () As SemaphoreSecurityRestituisce
Oggetto SemaphoreSecurity che rappresenta la sicurezza del controllo di accesso per il semaforo di sistema denominato.
Eccezioni
L'oggetto Semaphore corrente rappresenta un semaforo di sistema denominato e l'utente non dispone di diritti ReadPermissions.
-oppure-
L'oggetto Semaphore corrente rappresenta un semaforo di sistema denominato e non è stato aperto con diritti ReadPermissions.
Esempio
Nell'esempio di codice seguente viene illustrato il comportamento tra processi di un semaforo denominato con sicurezza del controllo di accesso. Nell'esempio viene utilizzato l'overload del OpenExisting(String) metodo per verificare l'esistenza di un semaforo denominato.
Se il semaforo non esiste, viene creato con un numero massimo di due e con la sicurezza del controllo di accesso che nega all'utente corrente il diritto di usare il semaforo, ma concede il diritto di leggere e modificare le autorizzazioni per il semaforo.
Se si esegue l'esempio compilato da due finestre di comando, la seconda copia genererà un'eccezione di violazione di accesso nella chiamata al OpenExisting(String) metodo . L'eccezione viene intercettata e l'esempio usa l'overload del OpenExisting(String, SemaphoreRights) metodo per aprire il semaforo con i diritti necessari per leggere e modificare le autorizzazioni. La sicurezza del controllo di accesso per il semaforo di sistema viene ottenuta usando il GetAccessControl metodo .
Dopo aver modificato le autorizzazioni, il semaforo viene aperto con i diritti necessari per immettere e rilasciare. Se si esegue l'esempio compilato da una terza finestra di comando, viene eseguito usando le nuove autorizzazioni.
#using <System.dll>
using namespace System;
using namespace System::Threading;
using namespace System::Security::AccessControl;
using namespace System::Security::Permissions;
public ref class Example
{
public:
[SecurityPermissionAttribute(SecurityAction::Demand, Flags = SecurityPermissionFlag::UnmanagedCode)]
static void main()
{
String^ semaphoreName = L"SemaphoreExample5";
Semaphore^ sem = nullptr;
bool doesNotExist = false;
bool unauthorized = false;
// Attempt to open the named semaphore.
try
{
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), to enter and release the
// named semaphore.
//
sem = Semaphore::OpenExisting( semaphoreName );
}
catch ( WaitHandleCannotBeOpenedException^ ex )
{
Console::WriteLine( L"Semaphore does not exist." );
doesNotExist = true;
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
unauthorized = true;
}
// There are three cases: (1) The semaphore does not exist.
// (2) The semaphore exists, but the current user doesn't
// have access. (3) The semaphore exists and the user has
// access.
//
if ( doesNotExist )
{
// The semaphore does not exist, so create it.
//
// The value of this variable is set by the semaphore
// constructor. It is true if the named system semaphore was
// created, and false if the named semaphore already existed.
//
bool semaphoreWasCreated;
// Create an access control list (ACL) that denies the
// current user the right to enter or release the
// semaphore, but allows the right to read and change
// security information for the semaphore.
//
String^ user = String::Concat( Environment::UserDomainName,
L"\\", Environment::UserName );
SemaphoreSecurity^ semSec = gcnew SemaphoreSecurity;
SemaphoreAccessRule^ rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::Synchronize |
SemaphoreRights::Modify ),
AccessControlType::Deny );
semSec->AddAccessRule( rule );
rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::ReadPermissions |
SemaphoreRights::ChangePermissions ),
AccessControlType::Allow );
semSec->AddAccessRule( rule );
// Create a Semaphore object that represents the system
// semaphore named by the constant 'semaphoreName', with
// maximum count three, initial count three, and the
// specified security access. The Boolean value that
// indicates creation of the underlying system object is
// placed in semaphoreWasCreated.
//
sem = gcnew Semaphore( 3,3,semaphoreName,semaphoreWasCreated,semSec );
// If the named system semaphore was created, it can be
// used by the current instance of this program, even
// though the current user is denied access. The current
// program enters the semaphore. Otherwise, exit the
// program.
//
if ( semaphoreWasCreated )
{
Console::WriteLine( L"Created the semaphore." );
}
else
{
Console::WriteLine( L"Unable to create the semaphore." );
return;
}
}
else if ( unauthorized )
{
// Open the semaphore to read and change the access
// control security. The access control security defined
// above allows the current user to do this.
//
try
{
sem = Semaphore::OpenExisting( semaphoreName,
static_cast<SemaphoreRights>(
SemaphoreRights::ReadPermissions |
SemaphoreRights::ChangePermissions ));
// Get the current ACL. This requires
// SemaphoreRights.ReadPermissions.
SemaphoreSecurity^ semSec = sem->GetAccessControl();
String^ user = String::Concat( Environment::UserDomainName,
L"\\", Environment::UserName );
// First, the rule that denied the current user
// the right to enter and release the semaphore must
// be removed.
SemaphoreAccessRule^ rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::Synchronize |
SemaphoreRights::Modify ),
AccessControlType::Deny );
semSec->RemoveAccessRule( rule );
// Now grant the user the correct rights.
//
rule = gcnew SemaphoreAccessRule( user,
static_cast<SemaphoreRights>(
SemaphoreRights::Synchronize |
SemaphoreRights::Modify ),
AccessControlType::Allow );
semSec->AddAccessRule( rule );
// Update the ACL. This requires
// SemaphoreRights.ChangePermissions.
sem->SetAccessControl( semSec );
Console::WriteLine( L"Updated semaphore security." );
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), the rights required to
// enter and release the semaphore.
//
sem = Semaphore::OpenExisting( semaphoreName );
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unable to change permissions: {0}", ex->Message );
return;
}
}
// Enter the semaphore, and hold it until the program
// exits.
//
try
{
sem->WaitOne();
Console::WriteLine( L"Entered the semaphore." );
Console::WriteLine( L"Press the Enter key to exit." );
Console::ReadLine();
sem->Release();
}
catch ( UnauthorizedAccessException^ ex )
{
Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
}
}
};
using System;
using System.Threading;
using System.Security.AccessControl;
internal class Example
{
internal static void Main()
{
const string semaphoreName = "SemaphoreExample5";
Semaphore sem = null;
bool doesNotExist = false;
bool unauthorized = false;
// Attempt to open the named semaphore.
try
{
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), to enter and release the
// named semaphore.
//
sem = Semaphore.OpenExisting(semaphoreName);
}
catch(WaitHandleCannotBeOpenedException)
{
Console.WriteLine("Semaphore does not exist.");
doesNotExist = true;
}
catch(UnauthorizedAccessException ex)
{
Console.WriteLine("Unauthorized access: {0}", ex.Message);
unauthorized = true;
}
// There are three cases: (1) The semaphore does not exist.
// (2) The semaphore exists, but the current user doesn't
// have access. (3) The semaphore exists and the user has
// access.
//
if (doesNotExist)
{
// The semaphore does not exist, so create it.
//
// The value of this variable is set by the semaphore
// constructor. It is true if the named system semaphore was
// created, and false if the named semaphore already existed.
//
bool semaphoreWasCreated;
// Create an access control list (ACL) that denies the
// current user the right to enter or release the
// semaphore, but allows the right to read and change
// security information for the semaphore.
//
string user = Environment.UserDomainName + "\\"
+ Environment.UserName;
SemaphoreSecurity semSec = new SemaphoreSecurity();
SemaphoreAccessRule rule = new SemaphoreAccessRule(
user,
SemaphoreRights.Synchronize | SemaphoreRights.Modify,
AccessControlType.Deny);
semSec.AddAccessRule(rule);
rule = new SemaphoreAccessRule(
user,
SemaphoreRights.ReadPermissions | SemaphoreRights.ChangePermissions,
AccessControlType.Allow);
semSec.AddAccessRule(rule);
// Create a Semaphore object that represents the system
// semaphore named by the constant 'semaphoreName', with
// maximum count three, initial count three, and the
// specified security access. The Boolean value that
// indicates creation of the underlying system object is
// placed in semaphoreWasCreated.
//
sem = new Semaphore(3, 3, semaphoreName,
out semaphoreWasCreated, semSec);
// If the named system semaphore was created, it can be
// used by the current instance of this program, even
// though the current user is denied access. The current
// program enters the semaphore. Otherwise, exit the
// program.
//
if (semaphoreWasCreated)
{
Console.WriteLine("Created the semaphore.");
}
else
{
Console.WriteLine("Unable to create the semaphore.");
return;
}
}
else if (unauthorized)
{
// Open the semaphore to read and change the access
// control security. The access control security defined
// above allows the current user to do this.
//
try
{
sem = Semaphore.OpenExisting(
semaphoreName,
SemaphoreRights.ReadPermissions
| SemaphoreRights.ChangePermissions);
// Get the current ACL. This requires
// SemaphoreRights.ReadPermissions.
SemaphoreSecurity semSec = sem.GetAccessControl();
string user = Environment.UserDomainName + "\\"
+ Environment.UserName;
// First, the rule that denied the current user
// the right to enter and release the semaphore must
// be removed.
SemaphoreAccessRule rule = new SemaphoreAccessRule(
user,
SemaphoreRights.Synchronize | SemaphoreRights.Modify,
AccessControlType.Deny);
semSec.RemoveAccessRule(rule);
// Now grant the user the correct rights.
//
rule = new SemaphoreAccessRule(user,
SemaphoreRights.Synchronize | SemaphoreRights.Modify,
AccessControlType.Allow);
semSec.AddAccessRule(rule);
// Update the ACL. This requires
// SemaphoreRights.ChangePermissions.
sem.SetAccessControl(semSec);
Console.WriteLine("Updated semaphore security.");
// Open the semaphore with (SemaphoreRights.Synchronize
// | SemaphoreRights.Modify), the rights required to
// enter and release the semaphore.
//
sem = Semaphore.OpenExisting(semaphoreName);
}
catch(UnauthorizedAccessException ex)
{
Console.WriteLine("Unable to change permissions: {0}", ex.Message);
return;
}
}
// Enter the semaphore, and hold it until the program
// exits.
//
try
{
sem.WaitOne();
Console.WriteLine("Entered the semaphore.");
Console.WriteLine("Press the Enter key to exit.");
Console.ReadLine();
sem.Release();
}
catch(UnauthorizedAccessException ex)
{
Console.WriteLine("Unauthorized access: {0}", ex.Message);
}
}
}
Imports System.Threading
Imports System.Security.AccessControl
Friend Class Example
<MTAThread> _
Friend Shared Sub Main()
Const semaphoreName As String = "SemaphoreExample5"
Dim sem As Semaphore = Nothing
Dim doesNotExist as Boolean = False
Dim unauthorized As Boolean = False
' Attempt to open the named semaphore.
Try
' Open the semaphore with (SemaphoreRights.Synchronize
' Or SemaphoreRights.Modify), to enter and release the
' named semaphore.
'
sem = Semaphore.OpenExisting(semaphoreName)
Catch ex As WaitHandleCannotBeOpenedException
Console.WriteLine("Semaphore does not exist.")
doesNotExist = True
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unauthorized access: {0}", ex.Message)
unauthorized = True
End Try
' There are three cases: (1) The semaphore does not exist.
' (2) The semaphore exists, but the current user doesn't
' have access. (3) The semaphore exists and the user has
' access.
'
If doesNotExist Then
' The semaphore does not exist, so create it.
'
' The value of this variable is set by the semaphore
' constructor. It is True if the named system semaphore was
' created, and False if the named semaphore already existed.
'
Dim semaphoreWasCreated As Boolean
' Create an access control list (ACL) that denies the
' current user the right to enter or release the
' semaphore, but allows the right to read and change
' security information for the semaphore.
'
Dim user As String = Environment.UserDomainName _
& "\" & Environment.UserName
Dim semSec As New SemaphoreSecurity()
Dim rule As New SemaphoreAccessRule(user, _
SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
AccessControlType.Deny)
semSec.AddAccessRule(rule)
rule = New SemaphoreAccessRule(user, _
SemaphoreRights.ReadPermissions Or _
SemaphoreRights.ChangePermissions, _
AccessControlType.Allow)
semSec.AddAccessRule(rule)
' Create a Semaphore object that represents the system
' semaphore named by the constant 'semaphoreName', with
' maximum count three, initial count three, and the
' specified security access. The Boolean value that
' indicates creation of the underlying system object is
' placed in semaphoreWasCreated.
'
sem = New Semaphore(3, 3, semaphoreName, _
semaphoreWasCreated, semSec)
' If the named system semaphore was created, it can be
' used by the current instance of this program, even
' though the current user is denied access. The current
' program enters the semaphore. Otherwise, exit the
' program.
'
If semaphoreWasCreated Then
Console.WriteLine("Created the semaphore.")
Else
Console.WriteLine("Unable to create the semaphore.")
Return
End If
ElseIf unauthorized Then
' Open the semaphore to read and change the access
' control security. The access control security defined
' above allows the current user to do this.
'
Try
sem = Semaphore.OpenExisting(semaphoreName, _
SemaphoreRights.ReadPermissions Or _
SemaphoreRights.ChangePermissions)
' Get the current ACL. This requires
' SemaphoreRights.ReadPermissions.
Dim semSec As SemaphoreSecurity = sem.GetAccessControl()
Dim user As String = Environment.UserDomainName _
& "\" & Environment.UserName
' First, the rule that denied the current user
' the right to enter and release the semaphore must
' be removed.
Dim rule As New SemaphoreAccessRule(user, _
SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
AccessControlType.Deny)
semSec.RemoveAccessRule(rule)
' Now grant the user the correct rights.
'
rule = New SemaphoreAccessRule(user, _
SemaphoreRights.Synchronize Or SemaphoreRights.Modify, _
AccessControlType.Allow)
semSec.AddAccessRule(rule)
' Update the ACL. This requires
' SemaphoreRights.ChangePermissions.
sem.SetAccessControl(semSec)
Console.WriteLine("Updated semaphore security.")
' Open the semaphore with (SemaphoreRights.Synchronize
' Or SemaphoreRights.Modify), the rights required to
' enter and release the semaphore.
'
sem = Semaphore.OpenExisting(semaphoreName)
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unable to change permissions: {0}", _
ex.Message)
Return
End Try
End If
' Enter the semaphore, and hold it until the program
' exits.
'
Try
sem.WaitOne()
Console.WriteLine("Entered the semaphore.")
Console.WriteLine("Press the Enter key to exit.")
Console.ReadLine()
sem.Release()
Catch ex As UnauthorizedAccessException
Console.WriteLine("Unauthorized access: {0}", _
ex.Message)
End Try
End Sub
End Class
Commenti
Il GetAccessControl metodo usa la seguente combinazione di flag (combinati usando l'operazione OR bit per bit) per cercare le autorizzazioni: AccessControlSections.Access, AccessControlSections.Ownere AccessControlSections.Group.
L'utente deve disporre SemaphoreRights.ReadPermissions dei diritti per chiamare questo metodo e il semaforo deve essere stato aperto con SemaphoreRights.ReadPermissions diritti.
In un semaforo locale, la sicurezza del controllo di accesso è irrilevante. Se l'oggetto Semaphore non rappresenta un semaforo di sistema denominato, questo metodo restituisce un SemaphoreSecurity oggetto che concede tutti i diritti a qualsiasi utente.
Si applica a
Vedi anche
Collabora con noi su GitHub
L'origine di questo contenuto è disponibile in GitHub, in cui è anche possibile creare ed esaminare i problemi e le richieste pull. Per ulteriori informazioni, vedere la guida per i collaboratori.
Commenti e suggerimenti
Presto disponibile: Nel corso del 2024 verranno gradualmente disattivati i problemi di GitHub come meccanismo di feedback per il contenuto e ciò verrà sostituito con un nuovo sistema di feedback. Per altre informazioni, vedere https://aka.ms/ContentUserFeedback.
Invia e visualizza il feedback per