AccessibleNavigation Enumerazione
Definizione
Importante
Alcune informazioni sono relative alla release non definitiva del prodotto, che potrebbe subire modifiche significative prima della release definitiva. Microsoft non riconosce alcuna garanzia, espressa o implicita, in merito alle informazioni qui fornite.
Indica i valori da utilizzare per lo spostamento tra gli oggetti accessibili.
public enum class AccessibleNavigationpublic enum AccessibleNavigationtype AccessibleNavigation = Public Enum AccessibleNavigation- Ereditarietà
Campi
| Down | 2 | Navigazione in un oggetto di pari livello posizionato sotto l'oggetto iniziale. |
| FirstChild | 7 | Navigazione sul primo elemento figlio dell'oggetto. |
| LastChild | 8 | Navigazione sull'ultimo elemento figlio dell'oggetto. |
| Left | 3 | Navigazione sull'oggetto di pari livello posizionato a sinistra dell'oggetto iniziale. |
| Next | 5 | Navigazione sul successivo oggetto logico, in genere da un oggetto di pari livello all'oggetto iniziale. |
| Previous | 6 | Navigazione sul precedente oggetto logico, in genere da un oggetto di pari livello all'oggetto iniziale. |
| Right | 4 | Navigazione sull'oggetto di pari livello posizionato a destra dell'oggetto iniziale. |
| Up | 1 | Navigazione su un oggetto di pari livello posizionato sopra l'oggetto iniziale. |
Esempio
Nell'esempio di codice seguente viene illustrata la creazione di un controllo grafico con riconoscimento dell'accessibilità usando le AccessibleObject classi e Control.ControlAccessibleObject per esporre informazioni accessibili. Il controllo traccia due curve insieme a una legenda. La ChartControlAccessibleObject classe, che deriva da ControlAccessibleObject, viene usata nel CreateAccessibilityInstance metodo per fornire informazioni accessibili personalizzate per il controllo grafico. Poiché la legenda del grafico non è un controllo effettivo Control basato su base, ma viene invece disegnato dal controllo grafico, non contiene informazioni accessibili predefinite. A causa di questo, la ChartControlAccessibleObject classe esegue l'override GetChild del metodo per restituire le CurveLegendAccessibleObject informazioni accessibili per ogni parte della legenda. Quando un'applicazione con riconoscimento accessibile usa questo controllo, il controllo può fornire le informazioni accessibili necessarie.
Questo esempio illustra l'uso dell'enumerazione AccessibleNavigation con il Navigate metodo . Vedere la panoramica della classe per l'esempio AccessibleObject di codice completo.
// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl::CreateAccessibilityInstance .
ref class ChartControlAccessibleObject: public ControlAccessibleObject
{
private:
ChartControl^ chartControl;
public:
ChartControlAccessibleObject( ChartControl^ ctrl )
: ControlAccessibleObject( ctrl )
{
chartControl = ctrl;
}
property System::Windows::Forms::AccessibleRole Role
{
// Gets the role for the Chart. This is used by accessibility programs.
virtual System::Windows::Forms::AccessibleRole get() override
{
return ::AccessibleRole::Chart;
}
}
property AccessibleStates State
{
// Gets the state for the Chart. This is used by accessibility programs.
virtual AccessibleStates get() override
{
return AccessibleStates::ReadOnly;
}
}
// The CurveLegend objects are "child" controls in terms of accessibility so
// return the number of ChartLengend objects.
virtual int GetChildCount() override
{
return chartControl->Legends->Length;
}
// Gets the Accessibility object of the child CurveLegend idetified by index.
virtual AccessibleObject^ GetChild( int index ) override
{
if ( index >= 0 && index < chartControl->Legends->Length )
{
return chartControl->Legends[ index ]->AccessibilityObject;
}
return nullptr;
}
internal:
// Helper function that is used by the CurveLegend's accessibility object
// to navigate between sibiling controls. Specifically, this function is used in
// the CurveLegend::CurveLegendAccessibleObject.Navigate function.
AccessibleObject^ NavigateFromChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleNavigation navdir )
{
switch ( navdir )
{
case AccessibleNavigation::Down:
case AccessibleNavigation::Next:
return GetChild( child->ID + 1 );
case AccessibleNavigation::Up:
case AccessibleNavigation::Previous:
return GetChild( child->ID - 1 );
}
return nullptr;
}
// Helper function that is used by the CurveLegend's accessibility object
// to select a specific CurveLegend control. Specifically, this function is used
// in the CurveLegend::CurveLegendAccessibleObject.Select function.
void SelectChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleSelection selection )
{
int childID = child->ID;
// Determine which selection action should occur, based on the
// AccessibleSelection value.
if ( (selection & AccessibleSelection::TakeSelection) != (AccessibleSelection)0 )
{
for ( int i = 0; i < chartControl->Legends->Length; i++ )
{
if ( i == childID )
{
chartControl->Legends[ i ]->Selected = true;
}
else
{
chartControl->Legends[ i ]->Selected = false;
}
}
// AccessibleSelection->AddSelection means that the CurveLegend will be selected.
if ( (selection & AccessibleSelection::AddSelection) != (AccessibleSelection)0 )
{
chartControl->Legends[ childID ]->Selected = true;
}
// AccessibleSelection->AddSelection means that the CurveLegend will be unselected.
if ( (selection & AccessibleSelection::RemoveSelection) != (AccessibleSelection)0 )
{
chartControl->Legends[ childID ]->Selected = false;
}
}
}
};
// class ChartControlAccessibleObject
// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl.CreateAccessibilityInstance override.
public class ChartControlAccessibleObject : ControlAccessibleObject
{
ChartControl chartControl;
public ChartControlAccessibleObject(ChartControl ctrl) : base(ctrl)
{
chartControl = ctrl;
}
// Gets the role for the Chart. This is used by accessibility programs.
public override AccessibleRole Role
{
get {
return AccessibleRole.Chart;
}
}
// Gets the state for the Chart. This is used by accessibility programs.
public override AccessibleStates State
{
get {
return AccessibleStates.ReadOnly;
}
}
// The CurveLegend objects are "child" controls in terms of accessibility so
// return the number of ChartLengend objects.
public override int GetChildCount()
{
return chartControl.Legends.Length;
}
// Gets the Accessibility object of the child CurveLegend idetified by index.
public override AccessibleObject GetChild(int index)
{
if (index >= 0 && index < chartControl.Legends.Length) {
return chartControl.Legends[index].AccessibilityObject;
}
return null;
}
// Helper function that is used by the CurveLegend's accessibility object
// to navigate between sibiling controls. Specifically, this function is used in
// the CurveLegend.CurveLegendAccessibleObject.Navigate function.
internal AccessibleObject NavigateFromChild(CurveLegend.CurveLegendAccessibleObject child,
AccessibleNavigation navdir)
{
switch(navdir) {
case AccessibleNavigation.Down:
case AccessibleNavigation.Next:
return GetChild(child.ID + 1);
case AccessibleNavigation.Up:
case AccessibleNavigation.Previous:
return GetChild(child.ID - 1);
}
return null;
}
// Helper function that is used by the CurveLegend's accessibility object
// to select a specific CurveLegend control. Specifically, this function is used
// in the CurveLegend.CurveLegendAccessibleObject.Select function.
internal void SelectChild(CurveLegend.CurveLegendAccessibleObject child, AccessibleSelection selection)
{
int childID = child.ID;
// Determine which selection action should occur, based on the
// AccessibleSelection value.
if ((selection & AccessibleSelection.TakeSelection) != 0) {
for(int i = 0; i < chartControl.Legends.Length; i++) {
if (i == childID) {
chartControl.Legends[i].Selected = true;
} else {
chartControl.Legends[i].Selected = false;
}
}
// AccessibleSelection.AddSelection means that the CurveLegend will be selected.
if ((selection & AccessibleSelection.AddSelection) != 0) {
chartControl.Legends[childID].Selected = true;
}
// AccessibleSelection.AddSelection means that the CurveLegend will be unselected.
if ((selection & AccessibleSelection.RemoveSelection) != 0) {
chartControl.Legends[childID].Selected = false;
}
}
}
}
' Inner Class ChartControlAccessibleObject represents accessible information
' associated with the ChartControl.
' The ChartControlAccessibleObject is returned in the ' ChartControl.CreateAccessibilityInstance override.
Public Class ChartControlAccessibleObject
Inherits Control.ControlAccessibleObject
Private chartControl As ChartControl
Public Sub New(ctrl As ChartControl)
MyBase.New(ctrl)
chartControl = ctrl
End Sub
' Get the role for the Chart. This is used by accessibility programs.
Public Overrides ReadOnly Property Role() As AccessibleRole
Get
Return System.Windows.Forms.AccessibleRole.Chart
End Get
End Property
' Get the state for the Chart. This is used by accessibility programs.
Public Overrides ReadOnly Property State() As AccessibleStates
Get
Return AccessibleStates.ReadOnly
End Get
End Property
' The CurveLegend objects are "child" controls in terms of accessibility so
' return the number of ChartLengend objects.
Public Overrides Function GetChildCount() As Integer
Return chartControl.Legends.Length
End Function
' Get the Accessibility object of the child CurveLegend idetified by index.
Public Overrides Function GetChild(index As Integer) As AccessibleObject
If index >= 0 And index < chartControl.Legends.Length Then
Return chartControl.Legends(index).AccessibilityObject
End If
Return Nothing
End Function
' Helper function that is used by the CurveLegend's accessibility object
' to navigate between sibiling controls. Specifically, this function is used in
' the CurveLegend.CurveLegendAccessibleObject.Navigate function.
Friend Function NavigateFromChild(child As CurveLegend.CurveLegendAccessibleObject, _
navdir As AccessibleNavigation) As AccessibleObject
Select Case navdir
Case AccessibleNavigation.Down, AccessibleNavigation.Next
Return GetChild(child.ID + 1)
Case AccessibleNavigation.Up, AccessibleNavigation.Previous
Return GetChild(child.ID - 1)
End Select
Return Nothing
End Function
' Helper function that is used by the CurveLegend's accessibility object
' to select a specific CurveLegend control. Specifically, this function is used
' in the CurveLegend.CurveLegendAccessibleObject.Select function.
Friend Sub SelectChild(child As CurveLegend.CurveLegendAccessibleObject, selection As AccessibleSelection)
Dim childID As Integer = child.ID
' Determine which selection action should occur, based on the
' AccessibleSelection value.
If (selection And AccessibleSelection.TakeSelection) <> 0 Then
Dim i As Integer
For i = 0 To chartControl.Legends.Length - 1
If i = childID Then
chartControl.Legends(i).Selected = True
Else
chartControl.Legends(i).Selected = False
End If
Next i
' AccessibleSelection.AddSelection means that the CurveLegend will be selected.
If (selection And AccessibleSelection.AddSelection) <> 0 Then
chartControl.Legends(childID).Selected = True
End If
' AccessibleSelection.AddSelection means that the CurveLegend will be unselected.
If (selection And AccessibleSelection.RemoveSelection) <> 0 Then
chartControl.Legends(childID).Selected = False
End If
End If
End Sub
End Class
Commenti
Le direzioni di spostamento accessibili sono spaziali (su, giù, sinistra e destra) o logiche (primo figlio, ultimo figlio, successivo e precedente). Le direzioni logiche vengono usate quando i client passano da un elemento dell'interfaccia utente a un altro all'interno dello stesso contenitore.
AccessibleObject usa questa enumerazione.
Per altre informazioni, vedere Microsoft Accessibilità attiva.
