New-AzStorageCacheTarget
Create or update a Storage Target. This operation is allowed at any time, but if the cache is down or unhealthy, the actual creation/modification of the Storage Target may be delayed until the cache is healthy again.
Syntax
New-AzStorageCacheTarget
-CacheName <String>
-Name <String>
-ResourceGroupName <String>
[-SubscriptionId <String>]
[-BlobNfTarget <String>]
[-BlobNfUsageModel <String>]
[-BlobNfVerificationTimer <Int32>]
[-BlobNfWriteBackTimer <Int32>]
[-ClfTarget <String>]
[-Junction <INamespaceJunction[]>]
[-Nfs3Target <String>]
[-Nfs3UsageModel <String>]
[-Nfs3VerificationTimer <Int32>]
[-Nfs3WriteBackTimer <Int32>]
[-State <OperationalStateType>]
[-TargetType <StorageTargetType>]
[-UnknownAttribute <Hashtable>]
[-DefaultProfile <PSObject>]
[-AsJob]
[-NoWait]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Create or update a Storage Target. This operation is allowed at any time, but if the cache is down or unhealthy, the actual creation/modification of the Storage Target may be delayed until the cache is healthy again.
Examples
Example 1: Create or update a Storage Target.
New-AzStorageCacheTarget -CacheName azps-storagecache -Name azps-cachetarget -ResourceGroupName azps_test_gp_storagecache -Nfs3Target "10.0.44.44" -Nfs3UsageModel "READ_WRITE" -Nfs3VerificationTimer 30 -TargetType 'nfs3'
Name Location ResourceGroupName State
---- -------- ----------------- -----
azps-cachetarget eastus azps_test_gp_storagecache ReadyCreate or update a Storage Target. This operation is allowed at any time, but if the cache is down or unhealthy, the actual creation/modification of the Storage Target may be delayed until the cache is healthy again.
Parameters
-AsJob
Run the command as a job
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-BlobNfTarget
Resource ID of the storage container.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-BlobNfUsageModel
Identifies the StorageCache usage model to be used for this storage target.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-BlobNfVerificationTimer
Amount of time (in seconds) the cache waits before it checks the back-end storage for file updates.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-BlobNfWriteBackTimer
Amount of time (in seconds) the cache waits after the last file change before it copies the changed file to back-end storage.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CacheName
Name of cache. Length of name must not be greater than 80 and chars must be from the [-0-9a-zA-Z_] char class.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClfTarget
Resource ID of storage container.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DefaultProfile
The DefaultProfile parameter is not functional. Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
| Type: | PSObject |
| Aliases: | AzureRMContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Junction
List of cache namespace junctions to target for namespace associations. To construct, see NOTES section for JUNCTION properties and create a hash table.
| Type: | INamespaceJunction[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
Name of Storage Target.
| Type: | String |
| Aliases: | StorageTargetName |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Nfs3Target
IP address or host name of an NFSv3 host (e.g., 10.0.44.44).
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Nfs3UsageModel
Identifies the StorageCache usage model to be used for this storage target.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Nfs3VerificationTimer
Amount of time (in seconds) the cache waits before it checks the back-end storage for file updates.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Nfs3WriteBackTimer
Amount of time (in seconds) the cache waits after the last file change before it copies the changed file to back-end storage.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NoWait
Run the command asynchronously
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ResourceGroupName
The name of the resource group. The name is case insensitive.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-State
Storage target operational state.
| Type: | OperationalStateType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SubscriptionId
The ID of the target subscription.
| Type: | String |
| Position: | Named |
| Default value: | (Get-AzContext).Subscription.Id |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TargetType
Type of the Storage Target.
| Type: | StorageTargetType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UnknownAttribute
Dictionary of string->string pairs containing information about the Storage Target.
| Type: | Hashtable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |