Standard Conversions

Articolo
01/03/2018

The latest version of this topic can be found at Standard Conversions.

The C++ language defines conversions between its fundamental types. It also defines conversions for pointer, reference, and pointer-to-member derived types. These conversions are called "standard conversions." (For more information about types, standard types, and derived types, see Types.)

This section discusses the following standard conversions:

Integral promotions
Integral conversions
Floating conversions
Floating and integral conversions
Arithmetic conversions
Pointer conversions
Reference conversions
Pointer-to-member conversions

Note

User-defined types can specify their own conversions. Conversion of user-defined types is covered in Constructors and Conversions.

The following code causes conversions (in this example, integral promotions):

long  long_num1, long_num2;  
int   int_num;  
  
// int_num promoted to type long prior to assignment.  
long_num1 = int_num;  
  
// int_num promoted to type long prior to multiplication.  
long_num2 = int_num * long_num2;

The result of a conversion is an l-value only if it produces a reference type. For example, a user-defined conversion declared as operator int&() returns a reference and is an l-value. However, a conversion declared as operator int()returns an object and is not an l-value.

Integral promotions

Objects of an integral type can be converted to another wider integral type (that is, a type that can represent a larger set of values). This widening type of conversion is called "integral promotion." With integral promotion, you can use the following in an expression wherever another integral type can be used:

Objects, literals, and constants of type char and short int
Enumeration types
int bit fields
Enumerators

C++ promotions are "value-preserving." That is, the value after the promotion is guaranteed to be the same as the value before the promotion. In value-preserving promotions, objects of shorter integral types (such as bit fields or objects of type char) are promoted to type int if int can represent the full range of the original type. If int cannot represent the full range of values, then the object is promoted to type unsigned int. Although this strategy is the same as that used by ANSI C, value-preserving conversions do not preserve the "signedness" of the object.

Value-preserving promotions and promotions that preserve signedness normally produce the same results. However, they can produce different results if the promoted object is one of the following:

An operand of /, %, /=, %=, <, <=, >, or >=

These operators rely on sign for determining the result. Therefore, value-preserving and sign-preserving promotions produce different results when applied to these operands.
The left operand of >> or >>=

These operators treat signed and unsigned quantities differently when performing a shift operation. For signed quantities, shifting a quantity right causes the sign bit to be propagated into the vacated bit positions. For unsigned quantities, the vacated bit positions are zero-filled.
An argument to an overloaded function or operand of an overloaded operator that depends on the signedness of the type of that operand for argument matching. (See Overloaded Operators for more about defining overloaded operators.)

Integral conversions

Integral conversions are performed between integral types. The integral types are char, int, and long (and the short, signed, and unsigned versions of these types).

Signed to unsigned

Objects of signed integral types can be converted to corresponding unsigned types. When these conversions occur, the actual bit pattern does not change; however, the interpretation of the data changes. Consider this code:

  
#include <iostream>  
  
using namespace std;  
int main()  
{  
    short  i = -3;  
    unsigned short u;  
  
    cout << (u = i) << "\n";  
}  
// Output: 65533

In the preceding example, a signed short, i, is defined and initialized to a negative number. The expression (u = i) causes i to be converted to an unsigned short prior to the assignment to u.

Unsigned to signed

Objects of unsigned integral types can be converted to corresponding signed types. However, such a conversion can cause misinterpretation of data if the value of the unsigned object is outside the range representable by the signed type, as demonstrated in the following example:

  
#include <iostream>  
  
using namespace std;  
int main()  
{  
 short  i;  
 unsigned short u = 65533;  
  
 cout << (i = u) << "\n";  
}  
//Output: -3

In the preceding example, u is an unsigned short integral object that must be converted to a signed quantity to evaluate the expression (i = u). Because its value cannot be properly represented in a signed short, the data is misinterpreted as shown.

Floating point conversions

An object of a floating type can be safely converted to a more precise floating type — that is, the conversion causes no loss of significance. For example, conversions from float to double or from double to long double are safe, and the value is unchanged.

An object of a floating type can also be converted to a less precise type, if it is in a range representable by that type. (See Floating Limits for the ranges of floating types.) If the original value cannot be represented precisely, it can be converted to either the next higher or the next lower representable value. If no such value exists, the result is undefined. Consider the following example:

cout << (float)1E300 << endl;

The maximum value representable by type float is 3.402823466E38 — a much smaller number than 1E300. Therefore, the number is converted to infinity, and the result is 1.#INF.

Conversions between integral and floating point types

Certain expressions can cause objects of floating type to be converted to integral types, or vice versa. When an object of integral type is converted to a floating type and the original value cannot be represented exactly, the result is either the next higher or the next lower representable value.

When an object of floating type is converted to an integral type, the fractional part is truncated. No rounding takes place in the conversion process. Truncation means that a number like 1.3 is converted to 1, and –1.3 is converted to –1.

Arithmetic conversions

Many binary operators (discussed in Expressions with Binary Operators) cause conversions of operands and yield results the same way. The way these operators cause conversions is called "usual arithmetic conversions." Arithmetic conversions of operands of different native types are performed as shown in the following table. Typedef types behave according to their underlying native types.

Conditions for Type Conversion

Conditions Met	Conversion
Either operand is of type long double.	Other operand is converted to type long double.
Preceding condition not met and either operand is of type double.	Other operand is converted to type double.
Preceding conditions not met and either operand is of type float.	Other operand is converted to type float.
Preceding conditions not met (none of the operands are of floating types).	Integral promotions are performed on the operands as follows: - If either operand is of type `unsigned` long, the other operand is converted to type `unsigned long`. - If preceding condition not met, and if either operand is of type long and the other of type `unsigned` `int`, both operands are converted to type `unsigned long`. - If the preceding two conditions are not met, and if either operand is of type long, the other operand is converted to type long. - If the preceding three conditions are not met, and if either operand is of type `unsigned int`, the other operand is converted to type `unsigned int`. - If none of the preceding conditions are met, both operands are converted to type `int`.

The following code illustrates the conversion rules described in the table:

  
double dVal;  
float fVal;  
int iVal;  
unsigned long ulVal;  
  
int main() {  
   // iVal converted to unsigned long  
   // result of multiplication converted to double  
   dVal = iVal * ulVal;  
  
   // ulVal converted to float  
   // result of addition converted to double  
   dVal = ulVal + fVal;  
}

The first statement in the preceding example shows multiplication of two integral types, iVal and ulVal. The condition met is that neither operand is of floating type and one operand is of type unsigned int. Therefore, the other operand, iVal, is converted to type unsigned int. The result is assigned to dVal. The condition met is that one operand is of type double; therefore, the unsigned int result of the multiplication is converted to type double.

The second statement in the preceding example shows addition of a float and an integral type, fVal and ulVal. The ulVal variable is converted to type float (third condition in the table). The result of the addition is converted to type double (second condition in the table) and assigned to dVal.

Pointer conversions

Pointers can be converted during assignment, initialization, comparison, and other expressions.

Pointer to classes

There are two cases in which a pointer to a class can be converted to a pointer to a base class.

The first case is when the specified base class is accessible and the conversion is unambiguous. (See Multiple Base Classes for more information about ambiguous base-class references.)

Whether a base class is accessible depends on the kind of inheritance used in derivation. Consider the inheritance illustrated in the following figure.

Inheritance graph showing base-class accessibility
Inheritance Graph for Illustration of Base-Class Accessibility

The following table shows the base-class accessibility for the situation illustrated in the figure.

Base-Class Accessibility

Type of Function	Derivation	Conversion from B* to A* Legal?
External (not class-scoped) function	Private	No
	Protected	No
	Public	Yes
B member function (in B scope)	Private	Yes
	Protected	Yes
	Public	Yes
C member function (in C scope)	Private	No
	Protected	Yes
	Public	Yes

The second case in which a pointer to a class can be converted to a pointer to a base class is when you use an explicit type conversion. (See Expressions with Explicit Type Conversions for more information about explicit type conversions.)

The result of such a conversion is a pointer to the "subobject," the portion of the object that is completely described by the base class.

The following code defines two classes, A and B, where B is derived from A. (For more information on inheritance, see Derived Classes.) It then defines bObject, an object of type B, and two pointers (pA and pB) that point to the object.

// C2039 expected  
class A  
{  
public:  
    int AComponent;  
    int AMemberFunc();  
};  
  
class B : public A  
{  
public:  
    int BComponent;  
    int BMemberFunc();  
};  
int main()  
{  
   B bObject;  
   A *pA = &bObject;  
   B *pB = &bObject;  
  
   pA->AMemberFunc();   // OK in class A  
   pB->AMemberFunc();   // OK: inherited from class A  
   pA->BMemberFunc();   // Error: not in class A  
}

The pointer pA is of type A *, which can be interpreted as meaning "pointer to an object of type A." Members of bObject (such as BComponent and BMemberFunc) are unique to type B and are therefore inaccessible through pA. The pA pointer allows access only to those characteristics (member functions and data) of the object that are defined in class A.

Pointer to function

A pointer to a function can be converted to type void *, if type void * is large enough to hold that pointer.

Pointer to void

Pointers to type void can be converted to pointers to any other type, but only with an explicit type cast (unlike in C). (See Expressions with Explicit Type Conversions for more information about type casts.) A pointer to any type can be converted implicitly to a pointer to type void.A pointer to an incomplete object of a type can be converted to a pointer to void (implicitly) and back (explicitly). The result of such a conversion is equal to the value of the original pointer. An object is considered incomplete if it is declared, but there is insufficient information available to determine its size or base class.

A pointer to any object that is not const or volatile can be implicitly converted to a pointer of type void *.

const and volatile pointers

C++ does not supply a standard conversion from a const or volatile type to a type that is not const or volatile. However, any sort of conversion can be specified using explicit type casts (including conversions that are unsafe).

Note

C++ pointers to members, except pointers to static members, are different from normal pointers and do not have the same standard conversions. Pointers to static members are normal pointers and have the same conversions as normal pointers. (See (NOTINBUILD) Directly Derived Types for more information.)

null pointer conversions

An integral constant expression that evaluates to zero, or such an expression cast to a pointer type, is converted to a pointer called the "null pointer." This pointer is guaranteed to compare unequal to a pointer to any valid object or function (except for pointers to based objects, which can have the same offset and still point to different objects).

In C++11 the nullptr type should be preferred to the C-style null pointer.

Pointer expression conversions

Any expression with an array type can be converted to a pointer of the same type. The result of the conversion is a pointer to the first array element. The following example demonstrates such a conversion:

char szPath[_MAX_PATH]; // Array of type char.  
char *pszPath = szPath; // Equals &szPath[0].

An expression that results in a function returning a particular type is converted to a pointer to a function returning that type, except when:

The expression is used as an operand to the address-of operator (&).
The expression is used as an operand to the function-call operator.

Reference conversions

A reference to a class can be converted to a reference to a base class in the following cases:

The specified base class is accessible (as defined in Pointers to Classes).
The conversion is unambiguous. (See Multiple Base Classes for more information about ambiguous base-class references.)

The result of the conversion is a pointer to the subobject that represents the base class.

Pointer to member

Pointers to class members can be converted during assignment, initialization, comparison, and other expressions. This section describes the following pointer-to-member conversions:

Pointer to base class member

A pointer to a member of a base class can be converted to a pointer to a member of a class derived from it, when the following conditions are met:

The inverse conversion, from pointer to derived class to base-class pointer, is accessible.
The derived class does not inherit virtually from the base class.

When the left operand is a pointer to member, the right operand must be of pointer-to-member type or be a constant expression that evaluates to 0. This assignment is valid only in the following cases:

The right operand is a pointer to a member of the same class as the left operand.
The left operand is a pointer to a member of a class derived publicly and unambiguously from the class of the right operand.

Integral constant conversions

An integral constant expression that evaluates to zero is converted to a pointer called the "null pointer." This pointer is guaranteed to compare unequal to a pointer to any valid object or function (except for pointers to based objects, which can have the same offset and still point to different objects).

The following code illustrates the definition of a pointer to member i in class A. The pointer, pai, is initialized to 0, which is the null pointer.

class A  
{  
public:  
 int i;  
};  
  
int A::*pai = 0;  
  
int main()  
{  
}

Condividi tramite