Condividi tramite


Counter Types

Applies To: Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2

Each counter is assigned a counter type. The counter type determines how the counter data is calculated, averaged, and displayed. The Performance console supports more than 35 counter types, although many of the available counter types are not implemented in the counters installed with the Windows Server 2003 family. All supported counter types are described, including the following information.

Counter type name   The name of the counter type. The System Monitor counter descriptions in this Help file include the name of the counter type. You can click the counter name in the description to see a definition of the counter.

Description   A brief description of the counter type, including a description of the formula by which counters of that type are calculated and displayed.

Generic type   The general category that represents the display format counter. Generic types include:

  • Average. These counters measure a value over time and display the average of the last two measurements.

  • Difference. These counters subtract the last measurement from the previous one and display the difference, if it is positive; if negative, they display a zero.

  • Instantaneous. These counters display the most recent measurement.

  • Percentage. These counters display calculated values as a percentage.

  • Rate. Similar to an average counter, these counters sample an increasing count of events over time. The count is divided by the change in time to display a rate of activity.

Formula   Describes how to convert the raw data and other components, such as performance frequency, to arrive at the formatted counter value for display in the Performance console. The variables N and D appear in the formula to describe the two distinct data components, such as raw data and performance frequency, used to calculate the displayed counter values.

For each counter type, the notation of the formula can include the following variables:

Variable Description

B

A base-value variable. Some counter types require the use of a counter base that supplies a stored value for calculating their formatted value. That base value is the denominator in the formula for the counter type. When describing counter types with multiple samplings, B is shown with numbered subscripts, such as B0 for the oldest sampling, B1 for the next most recent sampling, and Bn for the latest sampling.

N

The numerator, typically the first variable. For the purposes of the calculation formulas in this section, N is used to describe the raw counter data.

D

The denominator, typically the second variable, as needed.

The following table describes the types of counter bases and the counter types that they support.

Base Type Description Corresponding Counter Types

PERF_AVERAGE_BASE

Stores the denominator for calculating a counter to present "time per operation" or "count per operation."

PERF_AVERAGE_BULK PERF_AVERAGE_TIMER

PERF_COUNTER_MULTI_BASE

Indicates the number of items sampled. It is used as the denominator in the calculations to get an average among the items sampled when taking timings of multiple, but similar, items.

PERF_100NSEC_MULTI_TIMER PERF_100NSEC_MULTI_TIMER_INV PERF_COUNTER_MULTI_TIMER PERF_COUNTER_MULTI_TIMER_INV

PERF_RAW_BASE

Stores the denominator of a counter that presents a general arithmetic fraction.

PERF_RAW_FRACTION

PERF_SAMPLE_BASE

Stores the number of sampling interrupts taken and is used as a denominator in the sampling fraction. The sampling fraction is the number of samples that were 1 (or TRUE) for a sample interrupt.

PERF_SAMPLE_FRACTION

Average   The mathematical formula used to calculate averages of the formatted counter data.

Example    An example of the specified counter type. Click the counter name in the example to see a description of that counter.