CounterSample コンストラクター
定義
重要
一部の情報は、リリース前に大きく変更される可能性があるプレリリースされた製品に関するものです。 Microsoft は、ここに記載されている情報について、明示または黙示を問わず、一切保証しません。
CounterSample 構造体の新しいインスタンスを初期化します。
オーバーロード
| CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType) |
CounterSample 構造体の新しいインスタンスを初期化し、CounterTimeStamp プロパティを 0 (ゼロ) に設定します。 |
| CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType, Int64) |
CounterSample 構造体の新しいインスタンスを初期化し、CounterTimeStamp プロパティを渡された値に設定します。 |
CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType)
- ソース:
- CounterSample.cs
- ソース:
- CounterSample.cs
- ソース:
- CounterSample.cs
CounterSample 構造体の新しいインスタンスを初期化し、CounterTimeStamp プロパティを 0 (ゼロ) に設定します。
public:
CounterSample(long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System::Diagnostics::PerformanceCounterType counterType);public CounterSample (long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System.Diagnostics.PerformanceCounterType counterType);new System.Diagnostics.CounterSample : int64 * int64 * int64 * int64 * int64 * int64 * System.Diagnostics.PerformanceCounterType -> System.Diagnostics.CounterSamplePublic Sub New (rawValue As Long, baseValue As Long, counterFrequency As Long, systemFrequency As Long, timeStamp As Long, timeStamp100nSec As Long, counterType As PerformanceCounterType)パラメーター
- rawValue
- Int64
パフォーマンス カウンターのサンプルに関連付けられている数値。
- baseValue
- Int64
サンプルが複数のカウンターに基づいている場合にだけ使用されるカウンターの生のベース値。省略できます。
- counterFrequency
- Int64
カウンターを読み取る頻度。
- systemFrequency
- Int64
システムがカウンターを読み取る頻度。
- timeStamp
- Int64
生のタイム スタンプ。
- timeStamp100nSec
- Int64
信頼性の高い生のタイム スタンプ。
- counterType
- PerformanceCounterType
このサンプルがスナップショットになるカウンターの種類を示す PerformanceCounterType オブジェクト。
注釈
このコンストラクターを使用して、パフォーマンス カウンターの最初のサンプルを取得します。 システム モニターは、 メソッドを初めて呼び出すときに、これらのパラメーターの NextSample 値を自動的に提供します。
適用対象
CounterSample(Int64, Int64, Int64, Int64, Int64, Int64, PerformanceCounterType, Int64)
- ソース:
- CounterSample.cs
- ソース:
- CounterSample.cs
- ソース:
- CounterSample.cs
CounterSample 構造体の新しいインスタンスを初期化し、CounterTimeStamp プロパティを渡された値に設定します。
public:
CounterSample(long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System::Diagnostics::PerformanceCounterType counterType, long counterTimeStamp);public CounterSample (long rawValue, long baseValue, long counterFrequency, long systemFrequency, long timeStamp, long timeStamp100nSec, System.Diagnostics.PerformanceCounterType counterType, long counterTimeStamp);new System.Diagnostics.CounterSample : int64 * int64 * int64 * int64 * int64 * int64 * System.Diagnostics.PerformanceCounterType * int64 -> System.Diagnostics.CounterSamplePublic Sub New (rawValue As Long, baseValue As Long, counterFrequency As Long, systemFrequency As Long, timeStamp As Long, timeStamp100nSec As Long, counterType As PerformanceCounterType, counterTimeStamp As Long)パラメーター
- rawValue
- Int64
パフォーマンス カウンターのサンプルに関連付けられている数値。
- baseValue
- Int64
サンプルが複数のカウンターに基づいている場合にだけ使用されるカウンターの生のベース値。省略できます。
- counterFrequency
- Int64
カウンターを読み取る頻度。
- systemFrequency
- Int64
システムがカウンターを読み取る頻度。
- timeStamp
- Int64
生のタイム スタンプ。
- timeStamp100nSec
- Int64
信頼性の高い生のタイム スタンプ。
- counterType
- PerformanceCounterType
このサンプルがスナップショットになるカウンターの種類を示す PerformanceCounterType オブジェクト。
- counterTimeStamp
- Int64
サンプルを取得した時刻。
例
次の例では、、、および パラメーターの値をsystemFrequencytimeStampcounterTyperawValuebaseValuecounterFrequencytimeStamp100nSec渡して、新しいCounterSample構造体を初期化する方法を示します。counterTimeStamp 構造体を作成した CounterSample 後、コンソール ウィンドウに のプロパティ値 CounterSample を表示します。
PerformanceCounter^ myPerformanceCounter1 = gcnew PerformanceCounter(
"Processor","% Processor Time","0" );
CounterSample myCounterSample1( 10L, 20L, 30L, 40L, 50L, 60L,
PerformanceCounterType::AverageCount64 );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample1.CounterTimeStamp );
Console::WriteLine( "BaseValue = {0}", myCounterSample1.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample1.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample1.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample1.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample1.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample1.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample1.CounterType );
// Hold the results of sample.
myCounterSample1 = myPerformanceCounter1->NextSample();
Console::WriteLine( "BaseValue = {0}", myCounterSample1.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample1.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample1.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample1.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample1.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample1.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample1.CounterType );
PerformanceCounter myPerformanceCounter1 = new PerformanceCounter
("Processor","% Processor Time", "0");
CounterSample myCounterSample1 = new CounterSample(10L, 20L, 30L, 40L, 50L, 60L,
PerformanceCounterType.AverageCount64);
Console.WriteLine("CounterTimeStamp = "+myCounterSample1.CounterTimeStamp);
Console.WriteLine("BaseValue = "+myCounterSample1.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample1.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample1.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample1.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample1.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample1.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample1.CounterType);
// Hold the results of sample.
myCounterSample1 = myPerformanceCounter1.NextSample();
Console.WriteLine("BaseValue = "+myCounterSample1.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample1.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample1.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample1.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample1.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample1.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample1.CounterType);
Dim myPerformanceCounter1 As New PerformanceCounter("Processor", _
"% Processor Time", "0")
Dim myCounterSample1 As New CounterSample(10&, 20&, 30&, 40&, 50&, 60&, _
PerformanceCounterType.AverageCount64)
Console.WriteLine("CounterTimeStamp = " & myCounterSample1.CounterTimeStamp)
Console.WriteLine("BaseValue = " & myCounterSample1.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample1.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample1.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample1.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample1.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample1.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample1.CounterType.ToString)
' Hold the results of sample.
myCounterSample1 = myPerformanceCounter1.NextSample()
Console.WriteLine("BaseValue = " & myCounterSample1.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample1.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample1.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample1.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample1.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample1.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample1.CounterType.ToString)
PerformanceCounter^ myPerformanceCounter2 =
gcnew PerformanceCounter( "Processor","% Processor Time","0" );
CounterSample myCounterSample2( 10L, 20L, 30L, 40L, 50L, 60L,
PerformanceCounterType::AverageCount64,300);
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
Console::WriteLine( "BaseValue = {0}", myCounterSample2.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample2.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample2.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample2.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample2.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample2.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample2.CounterType );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
// Hold the results of sample.
myCounterSample2 = myPerformanceCounter2->NextSample();
Console::WriteLine( "BaseValue = {0}", myCounterSample2.BaseValue );
Console::WriteLine( "RawValue = {0}", myCounterSample2.RawValue );
Console::WriteLine( "CounterFrequency = {0}", myCounterSample2.CounterFrequency );
Console::WriteLine( "SystemFrequency = {0}", myCounterSample2.SystemFrequency );
Console::WriteLine( "TimeStamp = {0}", myCounterSample2.TimeStamp );
Console::WriteLine( "TimeStamp100nSec = {0}", myCounterSample2.TimeStamp100nSec );
Console::WriteLine( "CounterType = {0}", myCounterSample2.CounterType );
Console::WriteLine( "CounterTimeStamp = {0}", myCounterSample2.CounterTimeStamp );
PerformanceCounter myPerformanceCounter2 = new PerformanceCounter
("Processor","% Processor Time", "0");
CounterSample myCounterSample2 = new CounterSample(10L, 20L, 30L, 40L, 50L, 60L,
PerformanceCounterType.AverageCount64, 300);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
Console.WriteLine("BaseValue = "+myCounterSample2.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample2.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample2.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample2.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample2.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample2.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample2.CounterType);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
// Hold the results of sample.
myCounterSample2 = myPerformanceCounter2.NextSample();
Console.WriteLine("BaseValue = "+myCounterSample2.BaseValue);
Console.WriteLine("RawValue = "+myCounterSample2.RawValue);
Console.WriteLine("CounterFrequency = "+myCounterSample2.CounterFrequency);
Console.WriteLine("SystemFrequency = "+myCounterSample2.SystemFrequency);
Console.WriteLine("TimeStamp = "+myCounterSample2.TimeStamp);
Console.WriteLine("TimeStamp100nSec = "+myCounterSample2.TimeStamp100nSec);
Console.WriteLine("CounterType = "+myCounterSample2.CounterType);
Console.WriteLine("CounterTimeStamp = "+myCounterSample2.CounterTimeStamp);
Dim myPerformanceCounter2 As New PerformanceCounter("Processor", _
"% Processor Time", "0")
Dim myCounterSample2 As New CounterSample(10&, 20&, 30&, 40&, 50&, 60&, _
PerformanceCounterType.AverageCount64, 300)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)
Console.WriteLine("BaseValue = " & myCounterSample2.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample2.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample2.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample2.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample2.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample2.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample2.CounterType.ToString)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)
' Hold the results of sample.
myCounterSample2 = myPerformanceCounter2.NextSample()
Console.WriteLine("BaseValue = " & myCounterSample2.BaseValue)
Console.WriteLine("RawValue = " & myCounterSample2.RawValue)
Console.WriteLine("CounterFrequency = " & myCounterSample2.CounterFrequency)
Console.WriteLine("SystemFrequency = " & myCounterSample2.SystemFrequency)
Console.WriteLine("TimeStamp = " & myCounterSample2.TimeStamp)
Console.WriteLine("TimeStamp100nSec = " & myCounterSample2.TimeStamp100nSec)
Console.WriteLine("CounterType = " & myCounterSample2.CounterType.ToString)
Console.WriteLine("CounterTimeStamp = " & myCounterSample2.CounterTimeStamp)
注釈
パフォーマンス カウンターの最初のサンプルを既に取得した後にサンプルを取得するには、このコンストラクターを使用します。 システム モニターでは、 メソッドを呼び出すと、これらのパラメーターの値が自動的に NextSample 提供されます。
適用対象
GitHub で Microsoft と共同作業する
このコンテンツのソースは GitHub にあります。そこで、issue や pull request を作成および確認することもできます。 詳細については、共同作成者ガイドを参照してください。
.NET
フィードバック
以下は間もなく提供いたします。2024 年を通じて、コンテンツのフィードバック メカニズムとして GitHub の issue を段階的に廃止し、新しいフィードバック システムに置き換えます。 詳細については、「https://aka.ms/ContentUserFeedback」を参照してください。
フィードバックの送信と表示