Set-CauClusterRole
Sets configuration properties for the CAU clustered role on the specified cluster.
Syntax
Set-CauClusterRole
[-UseDefault]
[-StartDate <DateTime>]
[-DaysOfWeek <Weekdays>]
[-WeeksOfMonth <Int32[]>]
[-CauPluginName <String[]>]
[-CauPluginArguments <Hashtable[]>]
[-MaxFailedNodes <Int32>]
[-MaxRetriesPerNode <Int32>]
[-NodeOrder <String[]>]
[-PreUpdateScript <String>]
[-PostUpdateScript <String>]
[-ConfigurationName <String>]
[-RequireAllNodesOnline]
[-WarnAfter <TimeSpan>]
[-StopAfter <TimeSpan>]
[-RebootTimeoutMinutes <Int32>]
[-SeparateReboots]
[-RunPluginsSerially]
[-StopOnPluginFailure]
[-EnableFirewallRules]
[-FailbackMode <FailbackType>]
[-SuspendClusterNodeTimeoutMinutes <Int32>]
[-ForcePauseNoDrain]
[-ForcePauseAndDrain]
[-ForcePauseDrainAndReboot]
[-SkipUpdateChecks]
[-SiteAwareUpdatingOrder <String[]>]
[-OsRollingUpgrade]
[-AttemptSoftReboot]
[-RebootMode <RebootType>]
[[-ClusterName] <String>]
[[-Credential] <PSCredential>]
[-Force]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CauClusterRole
[-UpdateNow]
[[-ClusterName] <String>]
[[-Credential] <PSCredential>]
[-Force]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CauClusterRole
[-UseDefault]
[[-ClusterName] <String>]
[[-Credential] <PSCredential>]
[-Force]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CauClusterRole
[-UseDefault]
[-StartDate <DateTime>]
[-DaysOfWeek <Weekdays>]
[-IntervalWeeks <Int32>]
[-CauPluginName <String[]>]
[-CauPluginArguments <Hashtable[]>]
[-MaxFailedNodes <Int32>]
[-MaxRetriesPerNode <Int32>]
[-NodeOrder <String[]>]
[-PreUpdateScript <String>]
[-PostUpdateScript <String>]
[-ConfigurationName <String>]
[-RequireAllNodesOnline]
[-WarnAfter <TimeSpan>]
[-StopAfter <TimeSpan>]
[-RebootTimeoutMinutes <Int32>]
[-SeparateReboots]
[-RunPluginsSerially]
[-StopOnPluginFailure]
[-EnableFirewallRules]
[-FailbackMode <FailbackType>]
[-SuspendClusterNodeTimeoutMinutes <Int32>]
[-ForcePauseNoDrain]
[-ForcePauseAndDrain]
[-ForcePauseDrainAndReboot]
[-SkipUpdateChecks]
[-SiteAwareUpdatingOrder <String[]>]
[-OsRollingUpgrade]
[-AttemptSoftReboot]
[-RebootMode <RebootType>]
[[-ClusterName] <String>]
[[-Credential] <PSCredential>]
[-Force]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CauClusterRole
[-UseDefault]
[-RunOnce]
[-CauPluginName <String[]>]
[-CauPluginArguments <Hashtable[]>]
[-MaxFailedNodes <Int32>]
[-MaxRetriesPerNode <Int32>]
[-NodeOrder <String[]>]
[-PreUpdateScript <String>]
[-PostUpdateScript <String>]
[-ConfigurationName <String>]
[-RequireAllNodesOnline]
[-WarnAfter <TimeSpan>]
[-StopAfter <TimeSpan>]
[-RebootTimeoutMinutes <Int32>]
[-SeparateReboots]
[-RunPluginsSerially]
[-StopOnPluginFailure]
[-EnableFirewallRules]
[-FailbackMode <FailbackType>]
[-SuspendClusterNodeTimeoutMinutes <Int32>]
[-ForcePauseNoDrain]
[-ForcePauseAndDrain]
[-ForcePauseDrainAndReboot]
[-SkipUpdateChecks]
[-SiteAwareUpdatingOrder <String[]>]
[-OsRollingUpgrade]
[-AttemptSoftReboot]
[-RebootMode <RebootType>]
[[-ClusterName] <String>]
[[-Credential] <PSCredential>]
[-Force]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-CauClusterRole cmdlet sets configuration properties for the Cluster-Aware Updating (CAU)
clustered role on the specified cluster. This cmdlet can specify properties such as the updating
schedule and updating run parameters.
To run this cmdlet with the PostUpdateScript or PreUpdateScript parameters, Windows
PowerShell remoting must be enabled on each node. To do this, use the Enable-PSRemoting cmdlet.
In addition, ensure that the Windows Remote Management - Compatibility Mode (HTTP-In) firewall
exception is enabled on each node.
Examples
Example 1: Configure settings for a CAU cluster role on the specified cluster on the first and second weeks of the month
$parameters = @{
ClusterName = 'CONTOSO-FC1'
DaysOfWeek = 'Tuesday'
WeeksOfMonth = '1,2'
RebootTimeoutMinutes = '10'
Force = $true
}
Set-CauClusterRole $parametersThis command configures settings for the CAU clustered role on the cluster named CONTOSO-FC1. The CAU clustered role is configured to perform updating runs on Tuesdays on the first and second weeks of each month. The CAU clustered role allows 10 minutes for the restarting of each node, if a restart is necessary. If the restart doesn't complete within this time, then the updating run on that node is marked as failed. Because the command specifies the Force parameter, the cmdlet runs without displaying confirmation prompts.
This example uses splatting to pass parameter values from the $parameters variable to the command.
Learn more about Splatting.
Example 2: Configure settings for a CAU cluster role on the specified cluster on the second week of the month
$parameters = @{
ClusterName = 'CONTOSO-FC1'
DaysOfWeek = 'Tuesday'
WeeksOfMonth = '1,2'
IntervalWeeks = '2'
RebootTimeoutMinutes = '10'
PostUpdateScript = 'c:\verifyupdatesinstalled.ps1'
Force = $true
}
Set-CauClusterRole $parameters
Name Value
---- -----
ResourceGroupName CAUCAUCldy8
Status Online
StartDate 10/14/2011 3:00:00 AM
PostUpdateScript G:\verifyupdatesinstalled.ps1
RebootTimeoutMinutes 10
DaysOfWeek Tuesday
WeeksInterval 2This command configures settings for the CAU clustered role on the cluster named CONTOSO-FC1. The
CAU clustered role is configured to perform updating runs on Tuesdays on the second week of each
month. The CAU clustered role allows 10 minutes for the restarting of each node, if a restart is
necessary. If the restart doesn't complete within this time, then the updating run on that node is
marked as failed. The CAU clustered role runs a script after updating completes, just after the
node leaves Maintenance mode. The script is located at the root of drive G: in clustered storage
and is named verifyupdatesinstalled.ps1. Because the command specifies the Force parameter,
the cmdlet runs without displaying confirmation prompts.
This example uses splatting to pass parameter values from the $parameters variable to the command.
Learn more about Splatting.
Example 3: Initiate an updating run on the specified cluster
Set-CauClusterRole -ClusterName "CONTOSO-FC1" -UpdateNow -ForceThis command causes the CAU clustered role to initiate an updating run immediately on the cluster named CONTOSO-FC1. Because the command specifies the Force parameter, the cmdlet runs without displaying confirmation prompts
Example 4: Configure settings for a CAU cluster role on the specified cluster
$WarnAfter = New-TimeSpan -hour 1 -minute 90 -seconds 10
$StopAfter = New-TimeSpan -hour 2 -minute 90 -seconds 10
$parameters = @{
ClusterName = 'CONTOSO-FC1'
WarnAfter = $WarnAfter
StopAfter = $StopAfter
StartDate = [DateTime] '1/1/2012'
Force = $true
}
Set-CauClusterRole @parametersThis example configures settings for the CAU clustered role on the cluster named CONTOSO-FC1. Time spans are specified for logging a warning or canceling the updating run if it isn't completed. The earliest date that an updating run can be triggered is 1/1/2012. Because the command specifies the Force parameter, the cmdlet runs without displaying confirmation prompts.
This example uses splatting to pass parameter values from the $parameters variable to the command.
Learn more about Splatting.
Parameters
-AttemptSoftReboot
Indicates that the CAU clustered role attempts a Kernel Soft Reboot (KSR) for the failover cluster.
KSR bypasses BIOS/firmware initialization. You can only use KSR for updates that do not require a BIOS/firmware initialization.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CauPluginArguments
Specifies a set of name=value pairs, as arguments, for each updating plug-in to use.
For instance, to specify a Domain argument for one plug-in:
@{Domain=Domain.local}
You can specify multiple pairs in a set separated with semicolons. For instance:
@{name1=value1;name2=value2;name3=value3}
These name=value pairs must be meaningful to the CauPluginName parameter that you specify. If you specify arguments for more than one plug-in, provide the sets of name=value pairs in the order that you pass values in CauPluginName, separated by commas. For instance:
@{name1=value1;name2=value2;name3=value3},@{name4=value4;name5=value5}
For the default Microsoft.WindowsUpdatePlugin plug-in, no arguments are needed. The following arguments are optional:
- 'IncludeRecommendedUpdates'='<Value>': Boolean value to indicate that recommended updates will be applied in addition to important updates on each node. If not specified, the default value is False.
- A standard Windows Update Agent query string that specifies criteria used by the Windows Update Agent to filter the updates that will be applied to each node. For a name, use QueryString and for a value, enclose the full query in quotation marks. If not specified, then the Microsoft.WindowsUpdatePlugin plug-in by default uses the following argument:
QueryString="IsInstalled=0 and Type='Software' and IsHidden=0 and IsAssigned=1"
For more information about query strings for the default Microsoft.WindowsUpdatePlugin plug-in and the criteria such as IsInstalled that can be included in the query strings, see IUpdateSearcher::Search method.
For the Microsoft.HotfixPlugin plug-in, the following argument is required:
- HotfixRootFolderPath=<Path>: The UNC path to a hotfix root folder in an SMB share with a structure that contains the updates to apply and that contains the hotfix configuration file.
The following arguments are optional for the Microsoft.HotfixPlugin plug-in:
- RequireSmbEncryption=<Value>: Boolean value to indicate that SMB Encryption will be enforced for accessing data from the SMB share. If not specified, the default value is False. To ensure the integrity of the data accessed from the SMB share, the plug-in requires that the share is enabled for either SMB signing or SMB Encryption.
- DisableAclChecks=<Value>: Boolean value to indicate that the plug-in will check for sufficient permissions on the hotfix root folder and the hotfix configuration file. If not specified, the default value is False.
- HotfixInstallerTimeoutMinutes=<Integer>: The length of time in minutes that the plug-in allows the hotfix installer process to return. If not specified, the default value is 30 minutes.
- HotfixConfigFileName=<name>: Name for the hotfix configuration file. If not specified, the
default name
DefaultHotfixConfig.xmlis used. For more information about required and optional arguments for the Microsoft.HotfixPlugin plug-in, see How Cluster-Aware Updating plug-ins work.
| Type: | Hashtable[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CauPluginName
Specifies one or more plug-ins to use when performing scans or updates. You can specify multiple values separated with commas. The default is the Microsoft.WindowsUpdatePlugin plug-in. This plug-in coordinates the Windows Update Agent software resident on each cluster node, the same software that is used when updates are downloaded from Windows Update or Microsoft Update, or from a Windows Server Update Services (WSUS) server. For more information about how plug-ins work with CAU, see How CAU Plug-ins Work.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClusterName
Specifies the name of the cluster on which to configure the CAU clustered role. If not specified, then the current cluster is used. This parameter is only required when this cmdlet isn't run on a failover cluster node, or this cmdlet is used to reference a failover cluster different from where the cmdlet is run.
| Type: | String |
| Position: | 0 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConfigurationName
Specifies the Windows PowerShell session configuration that defines the session in which scripts, specified by the PreUpdateScript and PostUpdateScript parameters, and cmdlets are run, and can limit the cmdlets that are available to be run. If either a pre-update or post-update script is specified but a configuration name isn't specified, then the default session configuration that is built into Windows PowerShell is used.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Credential
Specifies the administrative credentials for the target cluster.
| Type: | PSCredential |
| Position: | 1 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DaysOfWeek
Specifies the days of the week on which the task will be triggered. Multiple values can be specified either separated with commas or as a hexadecimal sum.
- Sunday: (0x01)
- Monday: (0x02)
- Tuesday: (0x04)
- Wednesday: (0x08)
- Thursday: (0x10)
- Friday: (0x20)
- Saturday: (0x40)
Examples:
- -DaysOfWeek: Monday, Wednesday, Friday
- -DaysOfWeek: 0x02, 0x08, 0x20
- -DaysOfWeek: 0x2A
| Type: | Weekdays |
| Accepted values: | None, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableFirewallRules
Indicates that this cmdlet enables the Remote Shutdown Windows Firewall rule group on each cluster node, if it isn't already enabled, each time the CAU clustered role performs an Updating Run. Enabling this rule group permits inbound communication to each cluster node during each Updating Run that allows CAU to shut down and restart the node remotely. If Windows Firewall is in use on the cluster nodes and the rule group is not enabled, the updating run will fail. The Remote Shutdown Windows Firewall rule group is not enabled when it will conflict with Group Policy settings that are configured for Windows Firewall.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FailbackMode
Specifies the method used to bring drained workloads back to the node, at the end of updating the node. Drained workloads are workloads that were previously running on the node, but were moved to another node. The acceptable values for this parameter are:
- NoFailback
- Immediate
- Policy The default value is Immediate.
| Type: | FailbackType |
| Accepted values: | NoFailback, Immediate, Policy |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Force
Forces the command to run without asking for user confirmation.
| Type: | SwitchParameter |
| Aliases: | f |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForcePauseAndDrain
Indicates that the CAU cluster role forces cluster nodes to pause and drain roles.
A forced drain moves the roles off of the draining node even if the group cannot move. A group might not be able to move because no other node can host the group or the group is locked.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForcePauseDrainAndReboot
Indicates that the CAU cluster role forces cluster nodes to pause, drain roles, and restart.
A forced drain moves the roles off of the draining node even if the group cannot move. A group might not be able to move because no other node can host the group or the group is locked.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForcePauseNoDrain
Indicates that the CAU cluster role forces cluster nodes to pause. The nodes are not drained.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IntervalWeeks
Specifies the interval between weeks when the task will be triggered. An interval of 1 produces a weekly schedule. An interval of 2 produces an every-other week schedule.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaxFailedNodes
Specifies the maximum number of nodes on which updating can fail. If one more than this number of nodes fails, then the Updating Run is stopped. The range is from 0 through 1 less than the number of cluster nodes. The default for most clusters is approximately one-third of the number of nodes.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaxRetriesPerNode
Specifies the maximum number of times that the update process, which includes any pre-update and post-update scripts, is retried per node. The maximum is 64and the default is 3.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NodeOrder
Specifies an array of cluster node names in the order that they should be updated.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OsRollingUpgrade
Indicates that the CAU cluster role upgrades the operating system of the cluster nodes without stopping the Hyper-V or the Scale-Out File Server workloads.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PostUpdateScript
Specifies the path and file name for a Windows PowerShell script to run after updating completes,
just after the node leaves Maintenance mode. The file name extension must be .ps1 and the total
length of the path plus the file name must be no longer than 260 characters. As a best practice, the
script should be located on a disk in cluster storage, to ensure that it is always accessible to all
the cluster nodes.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PreUpdateScript
Specifies the path and file name for a Windows PowerShell script to run on each node before updating
begins, and before the node is put into Maintenance mode. The file name extension must be .ps1 and
the total length of the path plus the file name must be no longer than 260 characters. As a best
practice, the script should be located on a disk in cluster storage, to ensure that it is always
accessible to all the cluster nodes.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RebootMode
Specifies the type of reboot to use for each node in the cluster during the update. The available values are:
ClusPropFullRebootSoftRebootPluginCustomRebootOrchestratorDefault
| Type: | RebootType |
| Accepted values: | ClusProp, FullReboot, SoftReboot, PluginCustomReboot, OrchestratorDefault |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RebootTimeoutMinutes
Specifies the time in minutes that CAU will allow for the restarting of a node. If the restart doesn't complete within this time, then the updating run on that node is marked as failed.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RequireAllNodesOnline
Indicates that all cluster nodes must be online and reachable before updating begins.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RunOnce
Specifies that the CAU run should only be performed once, rather than on a recurring schedule. This can be useful if you only need to perform a one-time update of your cluster nodes.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RunPluginsSerially
Indicates that CAU scans each cluster node for applicable updates and stage the updates for each plug-in in the plug-in order passed into theCauPluginName parameter, when multiple plug-ins are used during an updating run.
By default, CAU scans and stages the applicable updates for all plug-ins in parallel. Regardless of the configuration of this parameter, CAU installs the applicable updates for each plug-in sequentially.
The parameter is valid only when multiple plug-ins are specified in the CauPluginName parameter. If a single plug-in is specified, a warning appears.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SeparateReboots
Indicates that CAU shuts down and restart a cluster node after each plug-in installs updates on the node, if the installation of an update by a plug-in requires a restart that CAU will shut down and restart a cluster node after each plug-in installs updates on the node, if the installation of an update by a plug-in requires a restart
The parameter is valid only when multiple plug-ins are specified in the CauPluginName parameter. If a single plug-in is specified, a warning appears.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SiteAwareUpdatingOrder
Specifies the order in which the CAU cluster role updates cluster nodes.
By default, CAU selects the order of nodes to update based on the level of activity.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SkipUpdateChecks
Indicates that the CAU cluster role skips update checks.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartDate
Specifies the earliest date on which the updating run can be triggered.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StopAfter
Specifies the time in minutes after which the updating run is canceled if it hasn't completed. The
time span can be expressed in the standard ways available in Windows PowerShell, for instance,
01:30:00 represents one hour and thirty minutes. By default, the updating run is allowed an
unlimited amount of time to complete.
If pre-update or post-update scripts are specified, then the entire process of running scripts and performing updates must be complete within this time limit.
| Type: | TimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StopOnPluginFailure
Indicates that if a failure occurs during the application of updates on a node by any plug-in, subsequent updates on the node that are coordinated by the remaining plug-ins are stopped when multiple plug-ins are used during an updating run.
The parameter is valid only when multiple plug-ins are specified for the CauPluginName parameter. If a single plug-in is specified, a warning appears.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SuspendClusterNodeTimeoutMinutes
Specifies the maximum amount of time CAU should wait for the Suspend-ClusterNode cmdlet to
succeed if the underlying clustered space is in degraded condition.
If Suspend-ClusterNode fails with ERROR_CLUSTER_SPACE_DEGRADED error, CAU will keep retrying for
SuspendClusterNodeTimeoutMinutes or suspend the call if the command succeeds.
These retries don't decrement the value of the MaxRetriesPerNode parameter set by the user.
The timeout value is per cluster node. So CAU could potentially spend the amount of time specified for this value for every node in the cluster in the worst case.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UpdateNow
Instructs the CAU clustered role to immediately initiate an updating run using the configured settings.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseDefault
Indicates that default values are used for all parameters that don't have specified values.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WarnAfter
Specifies the time in minutes after which a warning is logged if the updating run, including any pre-update and post-update scripts, hasn't completed. By default, no warning is logged, regardless of the time taken by the updating run.
| Type: | TimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WeeksOfMonth
Specifies the weeks of the month when the Updating Run should be run. The value 5 represents the last week of the month.
| Type: | Int32[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet isn't run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
None