編集

次の方法で共有


New-CsQoEConfiguration

Creates a new collection of QoE (Quality of Experience) settings. This cmdlet was introduced in Lync Server 2010.

Syntax

New-CsQoEConfiguration
   [-Identity] <XdsIdentity>
   [-EnableExternalConsumer <Boolean>]
   [-EnablePurging <Boolean>]
   [-EnableQoE <Boolean>]
   [-ExternalConsumerIssuedCertId <IssuedCertId>]
   [-ExternalConsumerName <String>]
   [-ExternalConsumerURL <String>]
   [-KeepQoEDataForDays <UInt32>]
   [-PurgeHourOfDay <UInt32>]
   [-Force]
   [-InMemory]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

QoE metrics track the quality of audio and video calls made in your organization, including such things as the number of network packets lost, background noise, and the amount of "jitter" (differences in packet delay). These metrics are stored in a database apart from other data (such as call detail records), which allows you to enable and disable QoE independent of other data recording. Use this cmdlet to create settings that configure QoE at the site level. (Settings at the global level exist by default and cannot be removed.)

QoE is part of the Monitoring Server role; therefore Monitoring Server must be deployed on your Skype for Business Server installation before QoE recording takes effect or any QoE data can be collected.

Examples

-------------------------- EXAMPLE 1 --------------------------

New-CsQoEConfiguration -Identity site:Redmond -EnableQoE $False

The command in Example 1 uses the New-CsQoEConfiguration cmdlet to create a new set of Quality of Experience settings with the Identity site:Redmond. In addition to the Identity site:Redmond, the new settings also have the EnableQoE property set to False. Because site settings take precedence over global settings, this means that QoE will be disabled for the Redmond site, regardless of whether or not QoE has been enabled at the global scope.

-------------------------- EXAMPLE 2 --------------------------

New-CsQoEConfiguration -Identity site:Dublin -KeepQoEDataForDays 30 -PurgeHourOfDay 4

This command creates new QoE settings that apply to the Dublin site. In this example we've set the KeepQoEDataForDays parameter to 30, so QoE data will be purged from the database after 30 days rather than the default 60 days. In addition, we've set the PurgeHourOfDay parameter to 4, meaning any data older than the 30 days we just specified will be purged at 4:00 AM.

Note: If you have enabled QoE and call detail recording (CDR), for performance reasons it's a good idea to make sure the PurgeHourOfDay setting is different for QoE than for CDR.

Parameters

-Confirm

Prompts you for confirmation before executing the command.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-EnableExternalConsumer

Specifies whether an external consumer is able to receive QoE reports.

Default: False

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-EnablePurging

Specifies whether records will be purged after the duration defined in the KeepQoEDataForDays property has elapsed.

Default: True

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-EnableQoE

Specifies whether QoE records will be collected and saved to the monitoring database.

Note that even if EnableQoE is set to True, QoE data will not be collected unless a Monitoring Server has been deployed and associated with a Registrar pool.

Default: True

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-ExternalConsumerIssuedCertId

The certificate ID of the certificate that allows access to the external consumer web service.

Type:IssuedCertId
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-ExternalConsumerName

The friendly name of the external consumer of the QoE report.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-ExternalConsumerURL

The URL of the external consumer to which the QoE reports will be posted.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-Force

Suppresses any confirmation prompts that would otherwise be displayed before making changes.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-Identity

The site to which the new settings apply. This must be entered in the format site:<site name>, where <site name> is the name of the site in your Skype for Business Server deployment.

Type:XdsIdentity
Position:2
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-InMemory

Creates an object reference without actually committing the object as a permanent change. If you assign the output of this cmdlet called with this parameter to a variable, you can make changes to the properties of the object reference and then commit those changes by calling this cmdlet's matching Set-<cmdlet>.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-KeepQoEDataForDays

The number of days QoE data will be stored before being purged from the database. This value is ignored if EnablePurging is set to False.

Must be a value from 1 through 2562.

Default: 60

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-PurgeHourOfDay

The hour of day that QoE records that have exceeded the number of days specified in the KeepQoEDataForDays property will be purged.

Must be a value 0 through 23, representing the hour of the day. For example, 0 would be midnight, 13 would be 1:00 PM. Default: 1

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-WhatIf

Describes what would happen if you executed the command without actually executing the command.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

Inputs

None.

Outputs

Creates an object of type Microsoft.Rtc.Management.WritableConfig.Settings.QoE.QoESettings.