PermStart Class
Defines the PermStart Class.When the object is serialized out as xml, its qualified name is w:permStart.
Inheritance Hierarchy
System.Object
DocumentFormat.OpenXml.OpenXmlElement
DocumentFormat.OpenXml.OpenXmlLeafElement
DocumentFormat.OpenXml.Wordprocessing.PermStart
Namespace: DocumentFormat.OpenXml.Wordprocessing
Assembly: DocumentFormat.OpenXml (in DocumentFormat.OpenXml.dll)
Syntax
'宣言
Public Class PermStart _
Inherits OpenXmlLeafElement
'使用
Dim instance As PermStart
public class PermStart : OpenXmlLeafElement
Remarks
[ISO/IEC 29500-1 初版]
17.13.4.2 permStart (Range Permission Start)
This element specifies the start of a range permission within a WordprocessingML document. This start marker is matched with the appropriately paired end marker by matching the value of the id attribute from the associated permEnd element.
If no permEnd element exists subsequent to this element in document order with a matching id attribute value, then the document is non-conformant.
If a range permission begins and ends within a single table, it is possible for that permission to cover discontiguous parts of that table which are logically related (e.g. a single column in a table). This type of placement for a range permission is accomplished (and described in detail) on the colFirst and colLast attributes on this element.
[Example: Consider a document with a range permission which spans half of paragraph one, and part of paragraph two. The following WordprocessingML illustrates an example of content which fufills this constraint:
<w:p>
<w:r>
<w:t xml:space="preserve">This is sentence one.</w:t>
</w:r>
<w:permStart w:id="0" w:edGrp="everyone"/>
<w:r>
<w:t>This is sentence two.</w:t>
</w:r>
</w:p>
<w:p>
<w:r>
<w:t xml:space="preserve">This </w:t>
</w:r>
<w:permEnd w:id="0"/>
<w:r>
<w:t>is sentence three.</w:t>
</w:r>
</w:p>
The permStart element specifies the start of the region for the range permission. This element is then linked to the permEnd element which also has an id attribute value of 0. end example]
Parent Elements |
---|
bdo (§17.3.2.3); body (§17.2.2); comment (§17.13.4.2); customXml (§17.5.1.6); customXml (§17.5.1.4); customXml (§17.5.1.5); customXml (§17.5.1.3); deg (§22.1.2.26); del (§17.13.5.14); den (§22.1.2.28); dir (§17.3.2.8); docPartBody (§17.12.6); e (§22.1.2.32); endnote (§17.11.2); fldSimple (§17.16.19); fName (§22.1.2.37); footnote (§17.11.10); ftr (§17.10.3); hdr (§17.10.4); hyperlink (§17.16.22); ins (§17.13.5.18); lim (§22.1.2.52); moveFrom (§17.13.5.22); moveTo (§17.13.5.25); num (§22.1.2.75); oMath (§22.1.2.77); p (§17.3.1.22); rt (§17.3.3.24); rubyBase (§17.3.3.27); sdtContent (§17.5.2.34); sdtContent (§17.5.2.33); sdtContent (§17.5.2.35); sdtContent (§17.5.2.36); smartTag (§17.5.1.9); sub (§22.1.2.112); sup (§22.1.2.114); tbl (§17.4.38); tc (§17.4.66); tr (§17.4.79) |
Attributes |
Description |
---|---|
colFirst (First Table Column Covered By Range Permission) |
Specifies the zero-based index of the first column in this row which shall be part of this range permission. When a range permission is contained within a table, it is possible for that range permission to only cover cells within a certain column and row range within that table, by specifying:
If this attribute appears, then the colLast attribute shall also appear (regardless of where this bookmark is located) or the document shall be considered non-conformant. If this attibute and its pair occur on a range permission which is not contained in a table, then their values should be ignored. If this value exceeds the value of colLast or the number of columns in the table, then both values should be ignored. [Example: Consider a three row by three column table where a table range permission shall be applied to the contents of the first two cells in the first two rows in the table (the cells shaded below): This bookmark would be specified using the following WordprocessingML for the table's conents:
The colFirst attribute specifies that all columns starting with the first column must be included in the table range permission. This applies starting with the first row and ending with the second row (the two rows within the range permission's start and end). end example] The possible values for this attribute are defined by the ST_DecimalNumber simple type (§17.18.10). |
colLast (Last Table Column Covered By Range Permission) |
Specifies the zero-based index of the last column in this row which shall be part of this range permission. When a range permission is contained within a table, it is possible for that range permission to only cover cells within a certain column and row range within that table, by specifying:
If this attribute appears, then the colFirst attribute shall also appear (regardless of where this bookmark is located) or the document shall be considered non-conformant. If this attibute and its pair occur on a bookmark which is not contained in a table, then their values should be ignored. If this value does not equal or exceed the value of colFirst or the number of columns in the table, then both values should be ignored. [Example: Consider a three row by three column table where a table range permission must be applied to the contents of the first two cells in the first two rows in the table (the cells shaded below): This bookmark would be specified using the following WordprocessingML for the table's conents:
The colLast attribute specifies that the last column that must be included in the table range permission is the second column. This applies starting with the first row and ending with the second row (the two rows within the range permission's start and end). end example] The possible values for this attribute are defined by the ST_DecimalNumber simple type (§17.18.10). |
displacedByCustomXml (Annotation Displaced By Custom XML Markup) |
Specifies that the parent annotation's placement shall be directly linked with the location of the physical presentation of a custom XML element in the document. This element only has an effect when the custom XML element is block-level (i.e. surrounds an entire paragraph), as in this scenario the logical and physical placement of the annotation and custom XML element can differ. Specifically, in this case, the custom XML is presented *around* the block-level object it encloses (the paragraph, table, table row, or table cell), but is physically represented within that same object (i.e. within the paragraph, table, table row or table cell). This requirement stems from the fact that there is no location for the location of the annotation within the document at its logical location (around a table, for example). If this element is omitted, then the annotation shall be anchored inside of all block-level custom XML elements in the paragraph. If this element is present, but no block-level custom XML tag is located at the position it specifies (before or after), then it shall be ignored. [Example: Consider a paragraph with block level custom XML markup and two comment anchor annotations (one before and one after the custom XML element's physical representation), as follows: Since all three of these items are around the entire paragraph, they are stored outside of the paragraph. However, in order to ensure that their relative positions are stored correctly, any annotation which must be displaced by the physical custom XML element specifies this information, resulting in the following WordprocessingML:
The displacedByCustomXml attribute specifies that even though all three of these items are around the paragraph and is moved inside the paragraph to be represented physically, the comment with ID 0 must be inside the custom XML, but the comment with ID 1 must be displaced to stay outside of the relative location of the next custom XML element (the spec element). end example] The possible values for this attribute are defined by the ST_DisplacedByCustomXml simple type (§17.18.13). |
ed (Single User For Range Permission) |
Specifies a single user for which this range permission shall be enabled (i.e. a user which shall be able to edit this range when document protection is enabled). This editor can be stored in one of the following forms:
[Example: Consider a range permission defined as follows:
The ed attribute value of example@example.com specifies that only user(s) who can authenticate with an application as associated with that e-mail address must be allowed to edit the contents between the start and end markers when document protection is being enforced. end example] The possible values for this attribute are defined by the ST_String simple type (§22.9.2.13). |
edGrp (Editor Group For Range Permission) |
Specifies an alias (or editing group) which shall be used to determine if the current user shall be allowed to edit this range of the document. This mechanism simply provides a set of predefined editing groups which can be associated with user accounts by applications in any desired manner. [Example: Consider a range permission defined as follows:
The edGrp attribute value of editors specifies that only user(s) who the current application associates with the editors group shall be allowed to edit the contents between the start and end markers when document protection is being enforced. end example] The possible values for this attribute are defined by the ST_EdGrp simple type (§17.18.21). |
id (Annotation ID) |
Specifies a unique identifier for an annotation within a WordprocessingML document. The restrictions on the id attribute, if any, are defined by the parent XML element. If this attribute is omitted, then the document is non-conformant. [Example: Consider an annotation represented using the following WordprocessingML fragment:
The id attribute specifies that the ID of the current annotation is 1. This value is used to uniquely identify this annotation within the document content. end example] The possible values for this attribute are defined by the ST_String simple type (§22.9.2.13). |
[Note: The W3C XML Schema definition of this element's content model (CT_PermStart) is located in §A.1. end note]
© ISO/IEC29500: 2008. 上記の引用はマイクロソフト (またはその代理) によって英語から日本語に翻訳されたものであり、ISO はこうした翻訳に対する責任を一切負いません。
Thread Safety
Any public static (Shared in Visual Basic) members of this type are thread safe. Any instance members are not guaranteed to be thread safe.