次の方法で共有


VpnS2SMultiTenantDefaultInterface class

Represents the default site-to-site (S2S) VPN interface for a multi-tenant gateway.

The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.

Syntax

[ClassVersion("1.0.0"), dynamic, provider("RAMgmtPSProvider"), AMENDMENT]
class VpnS2SMultiTenantDefaultInterface : VpnS2SDefaultInterface
{
  string             Protocol;
  string             Destination[];
  boolean            AdminStatus;
  string             InterfaceType;
  uint32             RetryInterval;
  uint32             SADataSizeForRenegotiation;
  uint32             SALifeTime;
  string             IPv6Subnet[];
  string             IPv4Subnet[];
  string             Name;
  string             UserName;
  uint8              Certificate[];
  uint32             NetworkOutageTime;
  uint32             NumberOfTries;
  boolean            PromoteAlternate;
  string             AuthenticationMethod;
  string             ResponderAuthenticationMethod;
  string             EapMethod;
  boolean            InternalIPv4;
  boolean            InternalIPv6;
  uint32             IdleDisconnect;
  uint32             LastError;
  string             UnReachabilityReasons;
  string             ConnectionState;
  string             IPv4TriggerFilter[];
  uint32             IPv4TriggerFilterAction;
  string             PostConnectionIPv4Subnet[];
  string             IPv6TriggerFilter[];
  uint32             IPv6TriggerFilterAction;
  string             PostConnectionIPv6Subnet[];
  boolean            Persistent;
  boolean            InitiateConfigPayload;
  uint32             EnableQoS;
  uint64             TxBandwidthKbps;
  uint64             RxBandwidthKbps;
  string             SourceIpAddress;
  uint32             MMSALifeTime;
  VpnTrafficSelector LocalVpnTrafficSelector[];
  VpnTrafficSelector RemoteVpnTrafficSelector[];
  uint32             LastDisconnectReason;
  string             EncryptionType;
  string             RoutingDomain;
  string             RadiusAttributeClass;
};

Members

The VpnS2SMultiTenantDefaultInterface class has these types of members:

Properties

The VpnS2SMultiTenantDefaultInterface class has these properties.

AdminStatus

Data type: boolean

Access type: Read/write

The admin status of the cmdlet.

This property is inherited from VpnS2SInterface.

AuthenticationMethod

Data type: string

Access type: Read/write

The authentication method to be used for the S2S connection.

This property is inherited from VpnS2SInterface.

The possible values are.

EAP ("EAP")

MachineCertificates ("MachineCertificates")

PSKOnly ("PSKOnly")

Certificate

Data type: uint8 array

Access type: Read/write

Subject Name of the certificate to be used in default store; applicable only when the authentication method is "MachineCert".

This property is inherited from VpnS2SInterface.

ConnectionState

Data type: string

Access type: Read-only

The current state of the interface, for example connected, disconnected, or unreachable.

This property is inherited from VpnS2SInterface.

Destination

Data type: string array

Access type: Read/write

The destination end-point of the S2S connection.

This property is inherited from VpnS2SInterface.

EapMethod

Data type: string

Access type: Read/write

The EAP method when the AuthenticationMethod property is "EAP".

This property is inherited from VpnS2SInterface.

The possible values are:

TLS ("TLS")

PEAP ("PEAP")

MSCHAPv2 ("MSCHAPv2")

EnableQoS

Data type: uint32

Access type: Read/write

Whether QoS is enabled on the interface.

This property is inherited from VpnS2SInterface..

The possible values are.

(0)

Enabled

(1)

Disabled

Windows Server 2012: This property was renamed from QoS in Windows Server 2012 R2.

EncryptionType

Data type: string

Access type: Read/write

Specifies the type of encryption.

This property is inherited from VpnS2SDefaultInterface.

The possible values are.

NoEncryption ("NoEncryption")

RequireEncryption ("RequireEncryption")

OptionalEncryption ("OptionalEncryption")

MaximumEncryption ("MaximumEncryption")

IdleDisconnect

Data type: uint32

Access type: Read/write

The duration, in seconds, after which an idle connection is terminated.

Unless the idle time-out is disabled, the entire connection is terminated if the connection is idle for the specified interval.

This property is inherited from VpnS2SInterface.

InitiateConfigPayload

Data type: boolean

Access type: Read/write

True to negotiate the configuration with peers; otherwise false.

Windows Server 2012: This property is not available before Windows Server 2012 R2.

This property is inherited from VpnS2SInterface.

InterfaceType

Data type: string

Access type: Read/write

The type of connection.

This property is inherited from VpnS2SInterface.

The possible values are.

HomeRouter ("HomeRouter")

FullRouter ("FullRouter")

InternalIPv4

Data type: boolean

Access type: Read/write

true to negotiate the IPv4 address.

This property is inherited from VpnS2SInterface.

InternalIPv6

Data type: boolean

Access type: Read/write

true to negotiate the IPv6 address.

This property is inherited from VpnS2SInterface.

IPv4Subnet

Data type: string array

Access type: Read/write

The IPv4 subnet that is routed on this connection.

This property is inherited from VpnS2SInterface.

IPv4TriggerFilter

Data type: string array

Access type: Read/write

An array that contains the demand dial filters for the IPv4 Transport.

Windows Server 2012: This parameter is unavailable before Windows Server 2012 R2.

This property is inherited from VpnS2SInterface.

IPv4TriggerFilterAction

Data type: uint32

Access type: Read/write

Whether the IPv4 trigger filters initiates the S2S connection.

This property is inherited from VpnS2SInterface..

The possible values are.

(0)

Allow

(1)

Block

Windows Server 2012: The data type of this property was changed from a string in Windows Server 2012 R2.

IPv6Subnet

Data type: string array

Access type: Read/write

The IPv6 subnet that is routed on this connection.

This property is inherited from VpnS2SInterface.

IPv6TriggerFilter

Data type: string array

Access type: Read/write

An array that contains the demand dial filters for the IPv6 Transport.

Windows Server 2012: This property is not available before Windows Server 2012 R2.

This property is inherited from VpnS2SInterface.

IPv6TriggerFilterAction

Data type: uint32

Access type: Read/write

Whether the IPv6 trigger filters initiates the S2S connection.

This property is inherited from VpnS2SInterface..

The possible values are.

(0)

Allow

(1)

Block

Windows Server 2012: The data type of this property was changed from a string in Windows Server 2012 R2.

LastDisconnectReason

Data type: uint32

Access type: Read-only

The reason for the last interface disconnect.

Windows Server 2012 R2 and Windows Server 2012: This property is not available before Windows Server 2016.

This property is inherited from VpnS2SInterface.

LastError

Data type: uint32

Access type: Read-only

The last error value if the interface fails to connect.

This property is inherited from VpnS2SInterface.

LocalVpnTrafficSelector

Data type: VpnTrafficSelector array

Access type: Read-only

Qualifiers: EmbeddedInstance ("VpnTrafficSelector")

An array of local VpnTrafficSelector embedded instances to be negotiated.

Windows Server 2012 R2 and Windows Server 2012: This property is not available before Windows Server 2016.

This property is inherited from VpnS2SInterface.

MMSALifeTime

Data type: uint32

Access type: Read/write

Lifetime of a main mode security association (SA), after which the MM SA is no longer valid, in seconds.

Windows Server 2012 R2 and Windows Server 2012: This property is not available before Windows Server 2016.

This property is inherited from VpnS2SInterface.

Name

Data type: string

Access type: Read/write

The name of the connection.

This property is inherited from VpnS2SInterface.

NetworkOutageTime

Data type: uint32

Access type: Read/write

Maximum network outage time after which the connection is disconnected.

This property is inherited from VpnS2SInterface.

NumberOfTries

Data type: uint32

Access type: Read/write

Number of times the connection is retried.

This property is inherited from VpnS2SInterface.

Persistent

Data type: boolean

Access type: Read/write

True if the connection is persistent; otherwise false.

Windows Server 2012: This property is not available before Windows Server 2012 R2.

This property is inherited from VpnS2SInterface.

PostConnectionIPv4Subnet

Data type: string array

Access type: Read/write

The IPv4 subnet to route

The routes specified by the subnet do not trigger the S2S connection.

Windows Server 2012: This property was renamed from IPv4DontTriggerSubnet in Windows Server 2012 R2.

This property is inherited from VpnS2SInterface.

PostConnectionIPv6Subnet

Data type: string array

Access type: Read/write

The IPv6 subnet to route

The routes specified by the subnet do not trigger the S2S connection.

Windows Server 2012: This property was renamed from IPv6DontTriggerSubnet in Windows Server 2012 R2.

This property is inherited from VpnS2SInterface.

PromoteAlternate

Data type: boolean

Access type: Read-only

Whether an alternate IP address that connects successfully becomes the primary IP address, and the current primary IP address is moved to the alternate list.

This property is inherited from VpnS2SInterface.

Protocol

Data type: string

Access type: Read/write

The underlying protocol.

This property is inherited from VpnS2SInterface..

The possible values are.

L2TP ("L2TP")

IKEv2 ("IKEv2")

Automatic ("Automatic")

GRE ("GRE")

Windows Server 2012 and Windows Server 2012 R2: The "GRE" value is not supported before Windows Server 2016.

RadiusAttributeClass

Data type: string

Access type: Read/write

Sets the Class attribute of the RADIUS server.

RemoteVpnTrafficSelector

Data type: VpnTrafficSelector array

Access type: Read-only

Qualifiers: EmbeddedInstance ("VpnTrafficSelector")

An array of remote VpnTrafficSelector embedded instances to be negotiated.

Windows Server 2012 R2 and Windows Server 2012: This property is not available before Windows Server 2016.

This property is inherited from VpnS2SInterface.

ResponderAuthenticationMethod

Data type: string

Access type: Read/write

The responder authentication method to be used for the S2S connection.

This property is inherited from VpnS2SInterface.

The possible values are.

MachineCertificates ("MachineCertificates")

PSKOnly ("PSKOnly")

RetryInterval

Data type: uint32

Access type: Read/write

Number of seconds between retries.

This property is inherited from VpnS2SInterface.

RoutingDomain

Data type: string

Access type: Read-only

Sets the friendly name of the routing domain.

RxBandwidthKbps

Data type: uint64

Access type: Read/write

The incoming bandwidth limit of the interface.

Windows Server 2012: This property is not available before Windows Server 2012 R2.

This property is inherited from VpnS2SInterface.

SADataSizeForRenegotiation

Data type: uint32

Access type: Read/write

The number of kilobytes that can be transferred using a security administration (SA). After the transfer, the SA will be renegotiated.

This property is inherited from VpnS2SInterface.

SALifeTime

Data type: uint32

Access type: Read/write

Lifetime of a security association (SA), in seconds, after which the SA is no longer valid.

This property is inherited from VpnS2SInterface.

SourceIpAddress

Data type: string

Access type: Read/write

The IP address of the interface.

Windows Server 2012: This property is not available before Windows Server 2012 R2.

This property is inherited from VpnS2SInterface.

TxBandwidthKbps

Data type: uint64

Access type: Read/write

The outgoing bandwidth limit of the interface.

Windows Server 2012: This property is not available before Windows Server 2012 R2.

This property is inherited from VpnS2SInterface.

UnReachabilityReasons

Data type: string

Access type: Read-only

The reason why the interface was unreachable.

This property is inherited from VpnS2SInterface.

UserName

Data type: string

Access type: Read/write

The username to use for dialing this connection when the authentication method is set to "EAP".

This property is inherited from VpnS2SInterface.

Requirements

Minimum supported client
None supported
Minimum supported server
Windows Server 2012 R2
Namespace
Root\Microsoft\Windows\RemoteAccess
MOF
RAMgmtPSProvider.Mof
DLL
RAMgmtPSProvider.dll

See also

VpnS2SDefaultInterface

RAMgmtPSProvider Provider Classes