NAT (Windows CE 5.0)
This module configures and manages Network Address Translation (NAT) for the Remote Configuration Framework.
The following table shows the configurable settings for NAT.
| Value : Type | Access | Index | Description |
|---|---|---|---|
| Public : STRING | Read-write | Not applicable | Specifies the list of network adapters on the public side of the gateway device. |
| Private : STRING | Read-write | Not applicable | Specifies the list of network adapters on the private side of the gateway device. |
| EnableAddressTranslation : DWORD | Read-write | Not applicable | If this value is set to 1, network address translation (NAT) is enabled. If this value is set to 0, network address translation is disabled. |
| EnableDhcpAllocator : DWORD | Read-write | Not applicable | If this value is set to 1, DHCP allocator is enabled. If this value is set to 0, DHCP allocator is disabled. |
| EnableDnsProxy : DWORD | Read-write | Not applicable | If this value is set to 1, DNS proxy is enabled. If this value is set to 0, DNS proxy is disabled. |
| EnableIGD : DWORD | Read-write | Not applicable | If this value is set to 1, Internet Gateway Device (IGD) is enabled. If this value is set to 0, IGD is disabled. |
| DHCPLeaseTime : DWORD | Read-write | Not applicable | Specifies the time, in seconds, for which the lease on this IP adapter is valid. This value is used by DHCP client. The valid range for this value is 1–0xFFFFFFFF. |
| NotConfigured : DWORD | Read-only | Not applicable | If this value is set to 1, NAT is not configured. This value does not exist if NAT is enabled and running. |
| InternalExposedHost : STRING | Read-write | Not applicable | Specifies the IP address of the internal exposed host. |
| DHCPStartAllocation : DWORD | Read-write | Not applicable | Specifies that last digit of the IPv4 address. This value is used as a start value for DHCP. |
| DHCPStopAllocation : DWORD | Read-write | Not applicable | Specifies that last digit of the IPv4 address. This value is used as a stop value for DHCP. |
| HostName : STRING | Read-only | IP | Specifies the host name for a specific IP address that has been assigned by DHCP allocator. |
| MAC : STRING | Read-only | IP | Specifies the MAC address in xx-xx-xx-xx-xx-xx format for a specific IP address. |
See Also
Remote Configuration Framework Modules
Send Feedback on this topic to the authors