Run Wireless BVTs
This test suite validates basic scan, connect, data transfer, and sleep resume functionality with a physical access point.
Test details
Associated requirements |
Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~40 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
This test will perform 4 actions per authentication and cipher pair:
Scan with flush ten times in a row and verify the configured access point is visible in the list.
Scan without flush and verify the configured access point is visible in the list with each scan.
Connect to the access point and ping the gateway.
Connect to the access point, put the machine into standby, wake it up, and verify it is still connected.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Parameters
| Parameter | Description |
|---|---|
AP1Password |
The root password for the first physical access point. |
AP1IPAddress |
The IP address of the WAN port of the first physical access point. |
AP2Password |
The root password for the second physical access point. |
AP2IPAddress |
The root password for the second physical access point. |