次の方法で共有


UAS Stress Reset logo test for UAS on EHCI

This test verifies compliance with the USB UASP version 1.04 specification, the SCSI SPC 4 specification, and SBC3 for USB UASP storage devices.

Test details

Associated requirements

Device.Storage.Hd.UasOnEHCI.BasicFunction

See the device hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~50 minutes

Categories

Certification Reliability

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Hard Disk Drive Testing Prerequisites.

In addition, this test requires a UAS device connected to USB 2.0 controller.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Storage Testing.

More Information

Reset detection for different IO workloads

If different types of IO workloads are on the drive, then the test detects if there are any LUN, Target, or Bus resets. LUN reset is new to UAS devices and becomes costly if a reset needs to be performed. This is because a LUN reset to the device times out and a target reset gets sent to the device. The time lapse causes the drive to become unusable. This applies if you have synchronous workloads with varying transfer sizes for longer duration.

Parameters

Parameter Description

Version

The USB version. The values can be either 2 or 3.

StorageDriveLetter

The drive letter of the device.

StorageDriveNumber

The driver number of the device.

QueryUASMaxTransferSize

The maximum transfer size supported by the device (in bytes).

Streams

The minimum number of streams supported by the device.

Default value: 16

UAS_Adapter_ID

The adapter device instance ID.

 

Command syntax

Command option Description

powershell .\StressReset.ps1 /scenario “uas” /version [Version] /driveletter [StorageDriveLetter] /drivenumber [StorageDriveNumber] /iosize [QueryUASMaxTransferSize] /streams [Streams] /pnpDeviceID “[UAS_Adapter_ID]”

Runs the test

 

Note  

For command-line help for this test binary, type /?.

 

File list

File Location

csvresultparser.dll

<[testbinroot]>\nttest\\basetest\core_file_services\performance\diskspd\

diskspd.exe

<[testbinroot]>\nttest\\basetest\core_file_services\performance\diskspd\

iorequestgenerator.dll

<[testbinroot]>\nttest\\basetest\core_file_services\performance\diskspd\

resultparser.dll

<[testbinroot]>\nttest\\basetest\core_file_services\performance\diskspd\

StressReset.ps1

<[testbinroot]>\nttest\DriversTest\storage\wdk\

 

 

 

Send comments about this topic to Microsoft