次の方法で共有


DNS Logging and Diagnostics

 

Applies To: Windows Server 2012 R2

Enhanced DNS logging and diagnostics is available by default in Windows Server® 2016 Technical Preview. This feature is also available in Windows Server® 2012 R2 when you install the query logging and change auditing hotfix, available from https://support.microsoft.com/kb/2956577.

DNS logging and diagnostics

See the following sections in this topic:

Performance considerations

DNS server performance can be affected when additional logging is enabled, however the enhanced DNS logging and diagnostics feature in Windows Server 2012 R2 and Windows Server 2016 Technical Preview is designed to have a very low impact on performance. The following sections discuss DNS server performance considerations when additional logging is enabled.

Debug logging

Prior to the introduction of DNS analytic logs, DNS debug logging was an available method to monitor DNS transactions. DNS debug logging is not the same as the enhanced DNS logging and diagnostics feature discussed in this topic. Debug logging is discussed here because it is also a tool that is available for DNS logging and diagnostics. See Using server debugging logging options for more information about DNS debug logging. The DNS debug log provides extremely detailed data about all DNS information that is sent and received by the DNS server, similar to the data that can be gathered using packet capture tools such as network monitor. Debug logging can affect overall server performance and also consumes disk space, therefore it is recommended to enable debug logging only temporarily when detailed DNS transaction information is needed.

Audit and analytic event logging

Enhanced DNS logging and diagnostics in Windows Server 2012 R2 and later includes DNS Audit events and DNS Analytic events. DNS audit logs are enabled by default, and do not significantly affect DNS server performance. DNS analytical logs are not enabled by default, and typically will only affect DNS server performance at very high DNS query rates. For example, a DNS server running on modern hardware that is receiving 100,000 queries per second (QPS) can experience a performance degradation of 5% when analytic logs are enabled. There is no apparent performance impact for query rates of 50,000 QPS and lower. However, it is always advisable to monitor DNS server performance whenever additional logging is enabled.

Installing and enabling DNS diagnostic logging

Perform the following procedures to install and enable DNS diagnostic logging on Windows Server 2012 R2. To install DNS diagnostic logging, the computer must be running the DNS Server role service.

If the DNS server is running Windows Server 2016 Technical Preview or later, diagnostic logging is already installed and you can skip the first procedure, performing only the steps in To enable DNS diagnostic logging below.

Membership in the Administrators group, or equivalent, is the minimum required to complete these procedures. Review details about using the appropriate accounts and group memberships at Local and Domain Default Groups (https://go.microsoft.com/fwlink/?LinkId=83477).

To install DNS diagnostic logging

  1. If the DNS server is running Windows Server 2012 R2, download the hotfix from https://support.microsoft.com/kb/2956577.

  2. Double-click the self-extracting file, for example 475151_intl_x64_zip.exe.

  3. In the Microsoft Self-Extractor dialog box, click Continue.

  4. Type a location where you want to save the extracted files, for example C:\hotfix. If the directory does not yet exist, you will be asked if you wish to create it. Click Yes and confirm that All files were successfully unzipped is displayed, then click Ok.

  5. In the location where files were unzipped, double-click the Windows Update file, for example Windows8.1-KB2956577-v2-x64.msu.

  6. The Windows Update Standalone Installer will verify that the computer meets requirements to install the update. These requirements include some prerequisite updates. When verification is complete, click Yes when asked if you wish to install the Hotfix for Windows (KB2956577).

  7. If recently downloaded updates have not yet been installed, you might need to restart the computer before the current hotfix can be installed. If this is required, you must restart the computer first and then run the Windows8.1-KB2956577-v2-x64.msu a second time after the computer has completed installing necessary updates. The Windows Update Standalone Installer will notify you that installation of the hotfix is not yet complete. If this happens, and you are prompted to restart the computer, click Restart Now.

  8. If the computer is ready to install the update when you run the hotfix, installation will complete and you must restart the computer for the update to take effect. If Installation complete is displayed, click Restart Now for the update to take effect.

You can confirm that the hotfix was successfully installed by viewing installed updates in the Programs and Features control panel. If the update is successfully installed, Hotfix for Microsoft Windows (KB2956577) will be displayed. You can also verify installation of the hotfix by typing wmic qfe | find "KB2956577" at an elevated command prompt. The URL and date of installation for the hotfix will be displayed if it was successfully installed.

To enable DNS diagnostic logging

  1. Type eventvwr.msc at an elevated command prompt and press ENTER to open Event Viewer.

  2. In Event Viewer, navigate to Applications and Services Logs\Microsoft\Windows\DNS-Server.

  3. Right-click DNS-Server, point to View, and then click Show Analytic and Debug Logs. The Analytical log will be displayed.

  4. Right-click Analytical and then click Properties.

  5. Under When maximum event log size is reached, choose Do not overwrite events (Clear logs manually), select the Enable logging checkbox, and click OK when you are asked if you want to enable this log. See the following example.

  6. Click OK again to enable the DNS Server Analytic event log.

By default, analytic logs are written to the file: %SystemRoot%\System32\Winevt\Logs\Microsoft-Windows-DNSServer%4Analytical.etl.

See the following sections for details about events that are displayed in the DNS server audit and analytic event logs.

Using DNS server audit and analytic events

DNS logs are compatible with Event Tracing for Windows (ETW) consumer applications such as logman, tracelog, and message analyzer. For more information about using event tracing, see About Event Tracing.

Using ETW consumers

You can use ETW consumers such as tracelog.exe with DNS server audit and analytic events by specifying a GUID of {EB79061A-A566-4698-9119-3ED2807060E7}.

You can get tracelog.exe by downloading and installing the Windows Driver Kit (WDK). Tracelog.exe is included when you install the WDK, Visual Studio, and the Windows SDK for desktop apps. For information about downloading the kits, see Windows Hardware Downloads. For example, when you download and install Windows Driver Kit (WDK) 8 and accept the default installation path, tracelog.exe is available at C:\Program Files (x86)\Windows Kits\8.0\Tools\x64\tracelog.exe.

For more information about using tracelog.exe, see Tracelog Command Syntax. The following examples demonstrate how to use tracelog.exe with DNS audit and analytic event logs:

The following command will enable both analytical and audit logging:

tracelog.exe -start Dns -guid #{EB79061A-A566-4698-9119-3ED2807060E7} -level 5 -matchanykw 0xFFFFFFFF -f C:\analytic_audit.etl

While the trace is active, all analytical and audit events will be recorded in the C:\analytic_audit.etl file that was specified on the command line. You can stop tracing by issuing a stop command:

tracelog –stop Dns

After stopping the trace, you can view the .etl file in Event Viewer by clicking Action and then clicking Open Saved Log. See the following example.

The following example enables just the analytical channel and matches only the keywords to 0x7FFFF:

tracelog.exe -start Dns -guid #{EB79061A-A566-4698-9119-3ED2807060E7} -level 5 -matchanykw 0x7FFFF -f C:\analytic.etl

A logging level of 5 is used in the previous examples. The following logging levels are available:

Logging level

Description

0 (None)

Logging OFF

1 (Critical)

Only critical events are logged, for example process exit or termination. If no logging level is given by the user this level is used by default.

2 (Error)

Only severe error events are logged, for example failures to complete a required task.

3 (Warning)

Errors that can cause a service issue, but are acceptable or recoverable, for example the first attempt to contact a forwarder has failed.

4 (Informational)

Very high-level events are recorded in the event log. These might include one message for each major task performed by the service. Use this setting to begin an investigation when the location of the problem is in doubt, for example a scavenger thread was started.

5 (Verbose)

All events are logged. This provides a complete log of the operation of the service. Use this level when the problem is traced to a particular category or a small set of categories.

Audit events

DNS server audit events enable change tracking on the DNS server. An audit event is logged each time server, zone, or resource record settings are changed. This includes operational events such as dynamic updates, zone transfers, and DNSSEC zone signing and unsigning. The following table summarizes DNS server audit events.

Table 1: DNS Server Audit Events

Event ID

Type

Category

Level

Event text

513

Zone delete

Zone operations

Informational

The zone %1 was deleted.

514

Zone updated

Zone operations

Informational

The zone %1 was updated. The %2 setting has been set to %3.

515

Record create

Zone operations

Informational

A resource record of type %1, name %2, TTL %3 and RDATA %5 was created in scope %7 of zone %6.

516

Record delete

Zone operations

Informational

A resource record of type %1, name %2 and RDATA %5 was deleted from scope %7 of zone %6.

517

RRSET delete

Zone operations

Informational

All resource records of type %1, name %2 were deleted from scope %4 of zone %3.

518

Node delete

Zone operations

Informational

All resource records at Node name %1 were deleted from scope %3 of zone %2.

519

Record create - dynamic update

Dynamic update

Informational

A resource record of type %1, name %2, TTL %3 and RDATA %5 was created in scope %7 of zone %6 via dynamic update from IP Address %8.

520

Record delete - dynamic update

Dynamic update

Informational

A resource record of type %1, name %2 and RDATA %5 was deleted from scope %7 of zone %6 via dynamic update from IP Address %8.

521

Record scavenge

Aging

Informational

A resource record of type %1, name %2, TTL %3 and RDATA %5 was scavenged from scope %7 of zone %6.

522

Zone scope create

Zone operations

Informational

The scope %1 was created in zone %2.

523

Zone scope delete

Zone operations

Informational

The scope %1 was deleted in zone %2.

525

Zone sign

Online signing

Informational

The zone %1 was signed with following properties: DenialOfExistence=%2; DistributeTrustAnchor=%3; DnsKeyRecordSetTtl=%4; DSRecordGenerationAlgorithm=%5; DSRecordSetTtl=%6; EnableRfc5011KeyRollover=%7; IsKeyMasterServer=%8; KeyMasterServer=%9; NSec3HashAlgorithm=%10; NSec3Iterations=%11; NSec3OptOut=%12; NSec3RandomSaltLength=%13; NSec3UserSalt=%14; ParentHasSecureDelegation=%15; PropagationTime=%16; SecureDelegationPollingPeriod=%17; SignatureInceptionOffset=%18.

526

Zone unsign

Online signing

Informational

The zone %1 was unsigned.

527

Zone re-sign

Online signing

Informational

The zone %1 was re-signed with following properties: DenialOfExistence=%2; DistributeTrustAnchor=%3; DnsKeyRecordSetTtl=%4; DSRecordGenerationAlgorithm=%5; DSRecordSetTtl=%6; EnableRfc5011KeyRollover=%7; IsKeyMasterServer=%8; KeyMasterServer=%9; NSec3HashAlgorithm=%10; NSec3Iterations=%11; NSec3OptOut=%12; NSec3RandomSaltLength=%13; NSec3UserSalt=%14; ParentHasSecureDelegation=%15; PropagationTime=%16; SecureDelegationPollingPeriod=%17; SignatureInceptionOffset=%18.

528

Key rollover start

DNSSEC operations

Informational

Rollover was started on the type %1 with GUID %2 of zone %3.

529

Key rollover end

DNSSEC operations

Informational

Rollover was completed on the type %1 with GUID %2 of zone %3.

530

Key retire

DNSSEC operations

Informational

The type %1 with GUID %2 of zone %3 was marked for retiral. The key will be removed after the rollover completion.

531

Key rollover triggered

DNSSEC operations

Informational

Manual rollover was triggered on the type %1 with GUID %2 of zone %3.

533

Key poke rollover

DNSSEC operations

Warning

The keys signing key with GUID %1 on zone %2 that was waiting for a Delegation Signer(DS) update on the parent has been forced to move to rollover completion.

534

Export DNSSEC

DNSSEC operations

Informational

DNSSEC setting metadata was exported %1 key signing key metadata from zone %2.

535

Import DNSSEC

DNSSEC operations

Informational

DNSSEC setting metadata was imported on zone %1.

536

Cache purge

Cache operations

Informational

A record of type %1, QNAME %2 was purged from scope %3 in cache.

537

Forwarder reset

Configuration

Informational

The forwarder list on scope %2 has been reset to %1.

540

Root hints

Configuration

Informational

The root hints have been modified.

541

Server setting

Configuration

Informational

The setting %1 on scope %2 has been set to %3.

542

Server scope create

Configuration

Informational

The scope %1 of DNS server was created.

543

Server scope delete

Configuration

Informational

The scope %1 of DNS server was deleted.

544

Add trust point DNSKEY

DNSSEC operations

Informational

The DNSKEY with Key Protocol %2, Base64 Data %4 and Crypto Algorithm %5 has been added at the trust point %1.

545

Add trust point DS

DNSSEC operations

Informational

The DS with Key Tag: %2, Digest Type: %3, Digest: %5 and Crypto Algorithm: %6 has been added at the trust point %1.

546

Remove trust point

DNSSEC operations

Informational

The trust point at %1 of type %2 has been removed.

547

Add trust point root

DNSSEC operations

Informational

The trust anchor for the root zone has been added.

548

Restart server

Server operations

Informational

A request to restart the DNS server service has been received.

549

Clear debug logs

Server operations

Informational

The debug logs have been cleared from %1 on DNS server.

550

Write dirty zones

Server operations

Informational

The in-memory contents of all the zones on DNS server have been flushed to their respective files.

551

Clear statistics

Server operations

Informational

All the statistical data for the DNS server has been cleared.

552

Start scavenging

Server operations

Informational

A resource record scavenging cycle has been started on the DNS Server.

553

Enlist directory partition

Server operations

Informational

1%

554

Abort scavenging

Server operations

Informational

The resource record scavenging cycle has been terminated on the DNS Server.

555

Prepare for demotion

Server operations

Informational

The DNS server has been prepared for demotion by removing references to it from all zones stored in the Active Directory.

556

Write root hints

Server operations

Informational

The information about the root hints on the DNS server has been written back to the persistent storage.

557

Listen address

Server operations

Informational

The addresses on which DNS server will listen has been changed to %1.

558

Active refresh trust points

DNSSEC operations

Informational

An immediate RFC 5011 active refresh has been scheduled for all trust points.

559

Pause zone

Zone operations

Informational

The zone %1 is paused.

560

Resume zone

Zone operations

Informational

The zone %1 is resumed.

561

Reload zone

Zone operations

Informational

The data for zone %1 has been reloaded from %2.

562

Refresh zone

Zone operations

Informational

The data for zone %1 has been refreshed from the master server %2.

563

Expire zone

Zone operations

Informational

The secondary zone %1 has been expired and new data has been requested from the master server %2.

564

Update from DS

Zone operations

Informational

The zone %1 has been reloaded from the Active Directory.

565

Write and notify

Zone operations

Informational

The content of the zone %1 has been written to the disk and the notification has been sent to all the notify servers.

566

Force aging

Zone operations

Informational

All DNS records at the node %1 in the zone %2 will have their aging time stamp set to the current time.%3

567

Scavenge servers

Zone operations

Informational

The Active Directory-integrated zone %1 has been updated. Only %2 can run scavenging.

568

Transfer key master

DNSSEC operations

Informational

The key master role for zone %1 has been %2.%3

569

Add SKD

DNSSEC operations

Informational

A %1 singing key (%2) descriptor has been added on the zone %3 with following properties: KeyId=%4; KeyType=%5; CurrentState=%6; KeyStorageProvider=%7; StoreKeysInAD=%8; CryptoAlgorithm=%9; KeyLength=%10; DnsKeySignatureValidityPeriod=%11; DSSignatureValidityPeriod=%12; ZoneSignatureValidityPeriod=%13; InitialRolloverOffset=%14; RolloverPeriod=%15; RolloverType=%16; NextRolloverAction=%17; LastRolloverTime=%18; NextRolloverTime=%19; CurrentRolloverStatus=%20; ActiveKey=%21; StandbyKey=%22; NextKey=%23. The zone will be resigned with the %2 generated with these properties.

570

Modify SKD

DNSSEC operations

Informational

A %1 singing key (%2) descriptor with GUID %3 has been updated on the zone %4. The properties of this %2 descriptor have been set to: KeyId=%5; KeyType=%6; CurrentState=%7; KeyStorageProvider=%8; StoreKeysInAD=%9; CryptoAlgorithm=%10; KeyLength=%11; DnsKeySignatureValidityPeriod=%12; DSSignatureValidityPeriod=%13; ZoneSignatureValidityPeriod=%14; InitialRolloverOffset=%15; RolloverPeriod=%16; RolloverType=%17; NextRolloverAction=%18; LastRolloverTime=%19; NextRolloverTime=%20; CurrentRolloverStatus=%21; ActiveKey=%22; StandbyKey=%23; NextKey=%24. The zone will be resigned with the %2 generated with these properties.

571

Delete SKD

DNSSEC operations

Informational

A %1 singing key (%2) descriptor %4 has been removed from the zone %3.

572

Modify SKD state

DNSSEC operations

Informational

The state of the %1 signing key (%2) %3 has been modified on zone %4. The new active key is %5, standby key is %6 and next key is %7.

573

Add delegation

Zone operations

Informational

A delegation for %1 in the scope %2 of zone %3 with the name server %4 has been added.

574

Create client subnet record

Policy operations

Informational

The client subnet record with name %1 value %2 has been added to the client subnet map.

575

Delete client subnet record

Policy operations

Informational

The client subnet record with name %1 has been deleted from the client subnet map.

576

Update client subnet record

Policy operations

Informational

The client subnet record with name %1 has been updated from the client subnet map. The new client subnets that it refers to are %2.

577

Create server level policy

Policy operations

Informational

A server level policy %6 for %1 has been created on server %2 with following properties: ProcessingOrder:%3; Criteria:%4; Action:%5.

578

Create zone level policy

Policy operations

Informational

A zone level policy %8 for %1 has been created on zone %6 on server %2 with following properties: ProcessingOrder:%3; Criteria:%4; Action:%5; Scopes:%7.

579

Create forwarding policy

Policy operations

Informational

A forwarding policy %6 has been created on server %2 with following properties: ProcessingOrder:%3; Criteria:%4; Action:%5; Scope:%1.

580

Delete server level policy

Policy operations

Informational

The server level policy %1 has been deleted from server %2.

581

delete zone level policy

Policy operations

Informational

The zone level policy %1 has been deleted from zone %3 on server %2.

582

Delete forwarding policy

Policy operations

Informational

The forwarding policy %1 has been deleted from server %2.

Analytic events

DNS server analytic events enable activity tracking on the DNS server. An analytic event is logged each time the server sends or receives DNS information. The following table summarizes DNS server analytic events.

Table 2: DNS Server Analytic Events

Event ID

Type

Category

Level

Event text

257

Response success

Lookup

Informational

RESPONSE_SUCCESS: TCP=%1; InterfaceIP=%2; Destination=%3; AA=%4; AD=%5; QNAME=%6; QTYPE=%7; XID=%8; DNSSEC=%9; RCODE=%10; Port=%11; Flags=%12; Scope=%13; Zone=%14; PolicyName=%15; PacketData=%17

258

Response failure

Lookup

Error

RESPONSE_FAILURE: TCP=%1; InterfaceIP=%2; Reason=%3; Destination=%4; QNAME=%5; QTYPE=%6; XID=%7; RCODE=%8; Port=%9; Flags=%10; Zone=%11; PolicyName=%12; PacketData=%14

259

Ignored query

Lookup

Error

IGNORED_QUERY: TCP=%1; InterfaceIP=%2; Reason=%3; QNAME=%4; QTYPE=%5; XID=%6; Zone=%7; PolicyName=%8

260

Query out

Recursive query

Informational

RECURSE_QUERY_OUT: TCP=%1; Destination=%2; InterfaceIP=%3; RD=%4; QNAME=%5; QTYPE=%6; XID=%7; Port=%8; Flags=%9; ServerScope=%10; CacheScope=%11; PolicyName=%12; PacketData=%14

261

Response in

Recursive query

Informational

RECURSE_RESPONSE_IN: TCP=%1; Source=%2; InterfaceIP=%3; AA=%4; AD=%5; QNAME=%6; QTYPE=%7; XID=%8; Port=%9; Flags=%10; ServerScope=%11; CacheScope=%12; PacketData=%14

262

Recursive query timeout

Recursive query

Error

RECURSE_QUERY_TIMEOUT: TCP=%1; InterfaceIP=%2; Destination=%3; QNAME=%4; QTYPE=%5; XID=%6; Port=%7; Flags=%8; ServerScope=%9; CacheScope=%10

263

Update in

Dynamic update

Informational

DYN_UPDATE_RECV: TCP=%1; InterfaceIP=%2; Source=%3; QNAME=%4; XID=%5; Port=%6; Flags=%7; SECURE=%8; PacketData=%10

264

Update response

Dynamic update

Informational

DYN_UPDATE_RESPONSE: TCP=%1; InterfaceIP=%2; Destination=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; RCODE=%8; PolicyName=%9; PacketData=%11

265

IXFR request out

Zone XFR

Informational

IXFR_REQ_OUT: TCP=%1; InterfaceIP=%2; Source=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; PacketData=%9

266

IXFR request in

Zone XFR

Informational

IXFR_REQ_RECV: TCP=%1; InterfaceIP=%2; Source=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; PacketData=%9

267

IXFR response out

Zone xfr

Informational

IXFR_RESP_OUT: TCP=%1; InterfaceIP=%2; Destination=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; RCODE=%8; PacketData=%10

268

IXFR response in

Zone xfr

Informational

IXFR_RESP_RECV: TCP=%1; InterfaceIP=%2; Destination=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; RCODE=%8; PacketData=%10

269

AXFR request out

Zone XFR

Informational

AXFR_REQ_OUT: TCP=%1; Source=%2; InterfaceIP=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; PacketData=%9

270

AXFR request in

Zone XFR

Informational

AXFR_REQ_RECV: TCP=%1; Source=%2; InterfaceIP=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; PacketData=%9

271

AXFR response out

Zone XFR

Informational

AXFR_RESP_OUT: TCP=%1; InterfaceIP=%2; Destination=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; RCODE=%8

272

AXFR response in

Zone XFR

Informational

AXFR_RESP_RECV: TCP=%1; InterfaceIP=%2; Destination=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; RCODE=%8

273

XFR notification in

Zone XFR

Informational

XFR_NOTIFY_RECV: Source=%1; InterfaceIP=%2; QNAME=%3; ZoneScope=%4; Zone=%5; PacketData=%7

274

XFR notification out

Zone XFR

Informational

XFR_NOTIFY_OUT: Destination=%1; InterfaceIP=%2; QNAME=%3; ZoneScope=%4; Zone=%5; PacketData=%7

275

XFR notify ACK in

Zone XFR

Informational

XFR_NOTIFY_ACK_IN: Source=%1; InterfaceIP=%2; PacketData=%4

276

XFR notify ACK out

Zone XFR

Informational

XFR_NOTIFY_ACK_OUT: Destination=%1; InterfaceIP=%2; Zone=%3; PacketData=%5

277

Update forward

Dynamic update

Informational

DYN_UPDATE_FORWARD: TCP=%1; ForwardInterfaceIP=%2; Destination=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; RCODE=%8; PacketData=%10

278

Update response in

Dynamic update

Informational

DYN_UPDATE_RESPONSE_IN: TCP=%1; InterfaceIP=%2; Source=%3; QNAME=%4; XID=%5; ZoneScope=%6; Zone=%7; RCODE=%8; PacketData=%10

279

Internal lookup CNAME

Lookup

Informational

INTERNAL_LOOKUP_CNAME: TCP=%1; InterfaceIP=%2; Source=%3; RD=%4; QNAME=%5; QTYPE=%6; Port=%7; Flags=%8; XID=%9; PacketData=%11

280

Internal lookup additional

Lookup

Informational

INTERNAL_LOOKUP_ADDITIONAL: TCP=%1; InterfaceIP=%2; Source=%3; RD=%4; QNAME=%5; QTYPE=%6; Port=%7; Flags=%8; XID=%9; PacketData=%11