Get-NetAdapterAdvancedProperty
Get-NetAdapterAdvancedProperty
Returns the advanced properties for the network adapter.
構文
Parameter Set: ByName
Get-NetAdapterAdvancedProperty [[-Name] <String[]> ] [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByInstanceID
Get-NetAdapterAdvancedProperty -InterfaceDescription <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByInstanceIDDisplayName
Get-NetAdapterAdvancedProperty -DisplayName <String[]> -InterfaceDescription <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByInstanceIDKeyword
Get-NetAdapterAdvancedProperty -InterfaceDescription <String[]> -RegistryKeyword <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByNameDisplayName
Get-NetAdapterAdvancedProperty [[-Name] <String[]> ] -DisplayName <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByNameRegistryKeyword
Get-NetAdapterAdvancedProperty [[-Name] <String[]> ] -RegistryKeyword <String[]> [-AllProperties] [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
詳細説明
The Get-NetAdapterAdvancedProperty cmdlet gets the advanced properties for the network adapter. By default this cmdlet returns advanced properties that have display name values, meaning that these advanced properties are visible in the Advanced pane of the Adapter Properties in the Windows UI. Advanced properties that do not have display names require that the AllProperties parameter is specified. Individual advanced properties can also be selected either by DisplayName or RegistryKeyword parameters. Both of these parameters support the use of wildcard characters. The advanced properties are normally found in the following location in the registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\xxxxxxxx
where xxxx
is a four character string representing an integer such as 0007
. The standardized keywords have a RegistryKeyword name that begins with an asterisk (*
). The valid values for these keywords are available by piping the output into the Format-List cmdlet with the ValidDisplayValues or the ValidRegistryValues specified.
パラメーター
-AllProperties
Returns all the advanced properties of the network adapter. If this parameter is not specified, then only advanced properties that have a DisplayName parameter are returned.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-DisplayName<String[]>
Specifies the advanced property name shown in the Advanced tab under the network adapter properties in Windows Server® 2012 and later.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
true (ByPropertyName) |
ワイルドカード文字を許可する |
true |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-InterfaceDescription<String[]>
Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
エイリアス |
ifDesc |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
true |
-Name<String[]>
Specifies the name of the network adapter.
エイリアス |
ifAlias, InterfaceAlias |
必須? |
false |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
true (ByPropertyName) |
ワイルドカード文字を許可する |
true |
-RegistryKeyword<String[]>
Contains the name of the registry value to be read, such as one of the registry values found in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0007.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
true (ByPropertyName) |
ワイルドカード文字を許可する |
true |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
- None
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterAdvancedPropertySettingData
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
例
EXAMPLE 1
This example gets all of the advanced properties that have a display name from all visible network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name *
EXAMPLE 2
This example gets all of the advanced properties from all visible network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name * -AllProperties
EXAMPLE 3
This example gets all of the advanced properties from all visible network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name * -RegistryKeyword *
EXAMPLE 4
This example gets all of the advanced properties from all network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name * -AllProperties -IncludeHidden
EXAMPLE 5
This example gets all of the advanced properties from all network adapters.
PS C:\> Get-NetAdapterAdvancedProperty -Name * -RegistryKeyword * -IncludeHidden
EXAMPLE 6
This example gets all of the unformatted, advanced properties from the network adapter named MyAdapter.
PS C:\> Get-NetAdapterAdvancedProperty -Name MyAdapter | Format-List -Property *
EXAMPLE 7
This example gets the advanced properties for network adapters that have a display name that starts with TCP.
PS C:\> Get-NetAdapterAdvancedProperty -Name * | Where-Object –FilterScript { $_.DisplayName -Like "TCP*" }
EXAMPLE 8
This example gets the advanced properties for network adapters that have a display name that starts with Inter.
PS C:\> Get-NetAdapterAdvancedProperty -Name * | Where-Object -FilterScript { $_.DisplayName -Like "Inter*" }
関連トピック
New-NetAdapterAdvancedProperty
Remove-NetAdapterAdvancedProperty
Reset-NetAdapterAdvancedProperty