Add-DnsServerRecursionScope
Add-DnsServerRecursionScope
Adds a recursion scope on a DNS server.
構文
Parameter Set: Add0
Add-DnsServerRecursionScope [-Name] <String> [[-Forwarder] <IPAddress[]> ] [[-EnableRecursion] <Boolean> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
詳細説明
The Add-DnsServerRecursionScope cmdlet adds a recursion scope on a Domain Name System (DNS) server. Recursion scopes are unique instances of a group of settings that control recursion on a DNS server. A recursion scope contains a list of forwarders and specifies whether recursion is enabled. A DNS server can have many recursion scopes.
DNS server recursion policies allow you to choose a recursion scope for a set of queries. If the DNS server is not authoritative for certain queries, DNS server recursion policies allow you to control how to resolve those queries. You can specify which forwarders to use and whether to use recursion.
The legacy recursion setting and list of forwarders are now referred as the default recursion scope. You cannot add or remove the default recursion scope, identified by name as dot (.).
パラメーター
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。コンピューター名またはセッション オブジェクト (New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など) を入力します。既定値は、ローカル コンピューター上の現在のセッションです。
Aliases |
Session |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ComputerName<String>
Specifies a remote DNS server. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
Aliases |
Cn |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-EnableRecursion<Boolean>
Indicates whether to enable recursion.
Aliases |
none |
必須/オプション |
false |
位置 |
4 |
既定値 |
none |
パイプライン入力の受け入れ |
true(ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-Forwarder<IPAddress[]>
Specifies an array IP addresses of forwarders for this recursion scope.
Aliases |
none |
必須/オプション |
false |
位置 |
3 |
既定値 |
none |
パイプライン入力の受け入れ |
true(ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-InformationAction<System.Management.Automation.ActionPreference>
Specifies how this cmdlet responds to an information event. このパラメーターに指定できる値は、次のとおりです。
-- SilentlyContinue
-- Stop
-- Continue
-- Inquire
-- Ignore
-- Suspend
Aliases |
infa |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-InformationVariable<System.String>
Specifies a variable in which to store an information event message.
Aliases |
iv |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Name<String>
Specifies a name for the recursion scope.
Aliases |
none |
必須/オプション |
true |
位置 |
2 |
既定値 |
none |
パイプライン入力の受け入れ |
true(ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-PassThru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットから出力は生成されません。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ThrottleLimit<Int32>
コマンドレットを実行する際に確立できる同時実行操作の最大数を指定します。このパラメーターを省略するか、値 0
を入力した場合、コンピューター上で実行されている CIM コマンドレットの数に基づいて、コマンドレットに最適なスロットル制限が Windows PowerShell® によって計算されます。スロットル制限は、セッションやコンピューターではなく、現在のコマンドレットにのみ適用されます。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Confirm
コマンドレットを実行する前に確認メッセージを表示します。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-WhatIf
コマンドレットが実行された場合に何が起きるのかを示します。コマンドレットは実行されません。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
<CommonParameters>
このコマンドレットは共通のパラメーターをサポートしています(-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、および -OutVariable)。詳細については、TechNet の「 「about_CommonParameters」 (https://go.microsoft.com/fwlink/p/?LinkID=113216) を参照してください。
<WorkflowParameters>
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットが出力するオブジェクトの型です。
- Microsoft.Management.Infrastructure.CimInstance#DnsServerRecursionScope
使用例
Example 1: Add a recursion scope
This command adds a recursion scope to the DNS server. This scope enables recursion and specifies two forwarders.
PS C:\> Add-DnsServerRecursionScope -Name "ScopeInternal" -Forwarder 10.0.0.1,172.22.0.1 -EnableRecursion $True -PassThru