다음을 통해 공유

SharePoint 2013 -Configure Incoming emails with Exchange Server 2013

  • 아티클

 

This blog post is to help you in configure Incoming emails in SharePoint 2013 using Exchange Server 2013

Setup

Domain Controller – Windows Server 2012

Exchange Server – Exchange Server 2013

SharePoint Server – SharePoint Server 2013

Lets begin the process of setting up Incoming emails

Creating OU for Storing Email Alias

  • Log in to DC or any computer which have Active Directory administration tools installed.
  • Open "Active Directory users and Computers"
  • Right click on domain name and select New > Organizational Unit
  • Provide some meaningful name and click on OK

clip_image001

  • Make sure the account which is running Timer Service on SharePoint Server has permissions to create and delete objects.

Add SMTP role to the SharePoint Server

 

  • Browse to Server Manager and click on Manage > Add roles and features

clip_image002

 

  • Click on Next and choose "Select a server from the server pool" and click Next

clip_image003

 

  • Click Next on the Roles screen

clip_image004

  • Select SMTP
  • Click on Add Features

clip_image005

 

  • Click Next
  • Click Install

Create Send Connector

 

  • Click on Mail Flow > Send Connectors

clip_image006

  • Click on New Send Connector Icon and give it meaningful name and chose Internal

clip_image007

  • Choose "Route mail through smart hosts" and click on Add and provide SharePoint Server FQDN

clip_image008

  • Choose None as the Authentication method

clip_image009

  • Provide the FQDN of the SharePoint Server where SMTP role is installed and click on Save and then Next

clip_image010

 

  • On the Source Server screen add the exchange server and click on Finish

clip_image011

  • Ensure that the Connector status shows as Enabled

clip_image012

Configure SMTP on SharePoint Server

 

  • Browse to Server Manager > Local Server > Tools> "Internet Information Services (IIS) 6.0 Manager"

clip_image013

  • Expand Server Name >
  • Right Click on SMTP and click on Properties

clip_image014

  • Click on Access > Authentication and ensure Anonymous is checked

clip_image015

Configure Email Settings in SharePoint

 

  • Browse to SharePoint central Administration
  • Click on System Settings > Configure Incoming e-mail settings
  • Configure settings based on the screen shots

clip_image016

clip_image017

Enable Incoming email on Document library

 

  • Browse to your Web Application
  • Create a new document library App
  • Browse to the List settings of the Document Library App

clip_image018

  • Click on Incoming e-mail settings

clip_image019

  • Configure the settings based on the following screen shot

clip_image020

  • Browse to the OU SharePoint Alias and make sure you see the contact created in it

clip_image021

Test the incoming email functionality

 

  • Send an email with an attachment to the email address that you configured, in my case it was doclib@sps2013.walia.com
  • Navigate to the Drop folder on the SMTP server, default location for the drop folder is C:\inetpub\mailroot\Drop
  • You should see your emails sent in this folder

clip_image022

  • Wait for 5 mins and these emails should get processed by the timer service
  • Browse to the Document library and you should see the attachment being uploaded to the document library

Feel free to post comments if you have any confusion regarding any of the steps.

Comments

  • Anonymous
    January 01, 2003
    This is one of the common ways of configuring Incoming Email. You can use any SMTP service to achieve this functionality.

  • Anonymous
    January 01, 2003
    It should work with default settings, if you want to change things like bad folder location...then u can do so

  • Anonymous
    January 01, 2003
    Thanks UB for pointing it out, we need to ensure that Anonymous is checked, I have updated the same in my blog post. :)

  • Anonymous
    December 29, 2012
    Thank you Harmeet for this excellent post. I was reading through the post and noticed that there seems to be an explanation missing on the Authentication settings on the SMTP Server on the Sharepoint Server, you mention going to IIS, selecting SMTP settings, clicking on Access, then Authentication, then there's nothing on what should be set for Authentication, you go straight to the e-mail settings in the Sharepoint Doc Library. Should the settings in authentication be set to "none" ? Looking forward to trying this.

  • Anonymous
    December 29, 2012
    Thanks for the clarification, now you need to do a post on outgoing e-mail through Exchange 2013 :-) i'm also trying to find out about the best way to publish Sharepoint 2013 sites in an Extranet scenario and also the same for OWA and Outlook Anywhere (Exchange 2013) any advice would be most welcome. In the meantime, wish you all the best for the New Year!

  • Anonymous
    May 18, 2013
    Hey Harmeet, Thank you for taking the time to share your knowledge. I have a very similar setup as you do and hence this will come in very handy. Feel free to drop by my SharePoint 2013 website which is sp2013.christianfamily.biz Daniel Christian

  • Anonymous
    May 31, 2013
    I think you have a typo... "Send an email with an attachment to the email address that you configured, in my case it was doclib@sps2013.walia.com" based on your screenshots it looks like that should be doclib@sps2013-b.walia.com, correct?

  • Anonymous
    September 02, 2013
    Thanks a lot.  Is there one for outgoing emails from Sharepoint 2013 to Exchange 2013.  If so can you reply to akshay.srin@gmail.com and send me the link so I can follow the instructions.  Your intructions were very clear and left no doubt and 100% right.

  • Anonymous
    December 16, 2013
    Hi, Do i need to install SMTP server Role in SharePoint if my client have a dedicated SMTP server outside of SharePoint Farm?Thanks

  • Anonymous
    January 24, 2014
    The comment has been removed

  • Anonymous
    March 28, 2014
    Thanks, Informative article on SharePoint 2013 Email Config http://khalil-kothia.com/> Khalil

  • Anonymous
    August 01, 2014
    Hi All

    There must be a reason for this. Could anyone please explain to me why do I need to configure SharePoint incoming email this way (with Exchange server) instead of just smtp on a SharePoint server? That is much simpler to me.

    Sorry for asking I am new to this and really like to know.

    Thanks

    Swanl

  • Anonymous
    September 04, 2014
    question, in the steps for configuring SMTP I see that you've only verified settings for the "Access" tab, should the other tabs and options be left as is? I've added my server IP in the "General" tab, set the Badmail folder to the "D" drive under the "Messages" tab, and added the FQDN of my server under the "Delivery -> Advanced Delivery" tab.

  • Anonymous
    October 22, 2014
    Although it is common to install SMTP on a SharePoint server it is not necessary (or desirable) if you have Exchange. Simply set up a Foreign Connector to drop the emails onto the SharePoint server and use the Advanced configuration in SharePoint to specify that location.

  • Anonymous
    June 11, 2015
    Hello i have this error when configuring incoming emails : The Active Directory container specified does not exist or has not granted the appropriate permissions to the account of the Central Administration application pool.
    What shall i do ?

  • Anonymous
    August 02, 2015
    i followed all the above steps.. but the drop folder is still empty.. any help!!

  • Anonymous
    August 19, 2015
    Same here. It is creating the contacts but no mail. Anybody has any idea about Site mailbox feature. Do we need this configuration to have that feature functioning?

  • Anonymous
    September 09, 2015
    I get the undeliverable messsage from Outlook:

    Intranet Announcements (SP_Announcements13@SHARE13.domainname.com)
    The domain name in the email address is incorrect. Check the email address.

    In 2010, I never had the issue. Can it have something to do with Office 365

  • Anonymous
    September 15, 2015
    My exchange server and sharepoint server are in different domain . How to configure incoming mail in such scenario

  • Anonymous
    October 06, 2015
    for all those who get errors while doing the last step (i.e. enabling incoming email on a SharePoint List) You need to ensure first that all your settings in SharePoint Administration are correct (Does the Container exist?) and second, does the farmAccount (or the account you have defined) have write access to that container?