다음을 통해 공유

BreakOnSysRq applies to USB (kbdhid) keyboards as well...

  • 아티클

If you happen to be debugging and hit the PrtScn / SysRq key on the debugee you may have noticed that this caused the debugger to break in. In certain situations this may not be the desired, thankfully it can be changed. This behavior and the modification is described in the following MSDN article, https://msdn.microsoft.com/en-us/library/cc267412.aspx.

One important thing to note though is that this also applies to USB keyboards through the kbdhid driver:

You can disable the SYSRQ key by editing the registry. In the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\kbdhid\Parameters registry key, create a value named BreakOnSysRq and set it equal to DWORD 0x0. Then, restart the computer. After you have restarted the computer, you can press the SYSRQ key on the target computer's keyboard and it will not break into the kernel debugger.

Debug | Break

Click Break on the Debug menu to stop the target's execution and return control to the debugger.

In user mode, this command stops the process and its threads, enabling you to regain control of the debugger. In kernel mode, this command breaks into the target computer.

You can also use this command while the debugger is active. In this situation, the command will truncate long Debugger Command window displays.

The Break command is equivalent to pressing CTRL+BREAK or clicking the Break (Ctrl+Break) button () on the toolbar.

User-Mode Effects

In user mode, the Break command causes the target application to break into the debugger. The target application stops, the debugger becomes active, and you can enter debugger commands.

If the debugger is already active, Break does not affect the target application. However, you can use this command to terminate a debugger command. For example, if you have requested a long display and do not want to see any more of it, Break will end the display and return you to the debugger command prompt.

When you are performing remote debugging with WinDbg, you can press the Break key on the host computer's keyboard. If you want to issue a break from the target computer's keyboard, use CTRL+C on an x86-based computer.

You can press the F12 key to open a command prompt when the application that is being debugged is busy. Click one of the target application's windows and press F12 on the target computer.

Kernel-Mode Effects

In kernel mode, the Break command causes the target computer to break into the debugger. This command locks the target computer and wakes up the debugger.

When you are debugging a system that is still running, you must press the Break key on the host keyboard to open an initial command prompt.

If the debugger is already active, Break does not affect the target computer. However, you can use this command to terminate a debugger command. For example, if you have requested a long display and do not want to see any more of it, Break will end the display and return you to the debugger command prompt.

You can also use Break to open a command prompt when a debugger command is generating a long display or when the target computer is busy. When you are debugging an x86-based computer, you can also press CTRL+C on the target keyboard to have the same effect.

The SYSRQ key (or pressing ALT+SYSRQ on an enhanced keyboard) is similar. This key works from the host or target keyboard on any processor. However, this key works only if you have opened the prompt by pressing CTRL+C at least one time before.

You can disable the SYSRQ key by editing the registry. In the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\i8042prt\Parameters registry key, create a value named BreakOnSysRq and set it equal to DWORD 0x0. Then, restart the computer. After you have restarted the computer, you can press the SYSRQ key on the target computer's keyboard and it will not break into the kernel debugger.

Additional Information

The corresponding key in KD and CDB is CTRL+C. For more information about other ways to control program execution, see Controlling the Target.

Comments