다음을 통해 공유

Install SNMP Windows Feature and Configure SNMP in System Center Operations Manager 2012 (SCOM)

  • 아티클

Steps:

  • Install Windows Features.
  • Configure SNMP Services.
  • Configure SCOM.

Install Windows Features

Open up server manager.

http://edwardvbs.files.wordpress.com/2014/08/snmp1.png?w=300

  • Once the Server Manager has initialized click on “Add roles and features”

http://edwardvbs.files.wordpress.com/2014/08/snmp2.png?w=300

  • Leave Role-based or feature-based installation as default and click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp3.png?w=300

  • Leave the default and then click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp4.png?w=300

  • Click Next on the roles section.

http://edwardvbs.files.wordpress.com/2014/08/snmp5.png?w=300

  • Scroll down on the features section until you find SNMP. Press the arrow on the left to expand it. Click both check boxes.

http://edwardvbs.files.wordpress.com/2014/08/snmp6.png?w=300

  • Once you have clicked the check boxes in the previous screen then this window will come up. Click the “Add Features” button.

http://edwardvbs.files.wordpress.com/2014/08/snmp7.png?w=300

  • Now that both are selected the Next button enables, click Next to continue.

http://edwardvbs.files.wordpress.com/2014/08/snmp8.png?w=300

  • Click the Install button.

http://edwardvbs.files.wordpress.com/2014/08/snmp9.png?w=300

  • Installation starting.

http://edwardvbs.files.wordpress.com/2014/08/snmp10.png?w=300

  • Feature installation busy. You can click the Close button and monitor the install from Server Manager.

http://edwardvbs.files.wordpress.com/2014/08/snmp11.png?w=300

  • Once the installation has completed click the close button.

Configure SNMP Services

Open up Services (you can click start -> Run -> Services.msc)

http://edwardvbs.files.wordpress.com/2014/08/snmp12.png?w=300

  • Disable the SNMP Trap Service.
  • Make sure the SNMP Service is started and set to Automatic.

http://edwardvbs.files.wordpress.com/2014/08/snmp13.png

  • Right Click on SNMP Service and select properties.

http://edwardvbs.files.wordpress.com/2014/08/snmp14.png?w=258

  • Click on the Security Tab.
  • Click on the “Add” button.

http://edwardvbs.files.wordpress.com/2014/08/snmp15.png?w=300

  • Select the Community Rights.
  • Type in the Community Name.
  • Click the Add button.

http://edwardvbs.files.wordpress.com/2014/08/snmp16.png?w=257

  • The details will now show under the “Accepted Community Names” Section.
  • Click OK.

Configure SCOM.

Open up the SCOM console.

http://edwardvbs.files.wordpress.com/2014/08/snmp17.png?w=241

  • Step 1 -> Click on the Authoring Tab.
  • Step 2 -> once the menus have refreshed click on the Rules line.

http://edwardvbs.files.wordpress.com/2014/08/snmp18.png?w=193

  • Step 1 -> Right Click Rules.
  • Step 2 -> Click on “Create a new rule”

http://edwardvbs.files.wordpress.com/2014/08/snmp19.png?w=300

  • The “Create Rule Wizard” screen will come up as shown above.

http://edwardvbs.files.wordpress.com/2014/08/snmp20.png?w=300

  • Expand Collection Rules -> Event Based.
  • Click on SNMP Trap (Event).
  • We are going to create a new management pack for rules. Click the New button as shown above.

http://edwardvbs.files.wordpress.com/2014/08/snmp21.png?w=300

  • Step 1 -> Enter in the Name.
  • Step 2 -> Click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp22.png?w=300

  • If you want to add in a knowledge Article click the “Edit” button.
  • Click on Create.
  • Click Next on the following screen.

http://edwardvbs.files.wordpress.com/2014/08/snmp23.png?w=300

  • Now we are going to create a new Rule. Step 1 -> Give the rule a name.
  • Step 2 -> Click on the Select button.

http://edwardvbs.files.wordpress.com/2014/08/snmp24.png?w=300

  • Step 1 -> In the box type in “Node” and then click on “View all Targets”. Press Enter.
  • Click on “Node and then Step 2 -> Click the OK button.

http://edwardvbs.files.wordpress.com/2014/08/snmp25.png?w=300

  • Once you have selected Node in the previous screen it will now show under the “Rule Target”
  • Click the Next button.

http://edwardvbs.files.wordpress.com/2014/08/snmp26.png?w=300

  • We cannot leave this screen blank so enter in 1.2.3.4.0.
  • Click on the create button.

http://edwardvbs.files.wordpress.com/2014/08/snmp27.png?w=300

  • Make sure you are on the Authoring Tab, have selected Rules.
  • In the Look For: button type in Node.
  • Scroll down till you find the type: Node and the name of the rule we just created.

http://edwardvbs.files.wordpress.com/2014/08/snmp28.png?w=300

  • Right click on the name (Step 1)
  • Click on Properties. (Step 2)

http://edwardvbs.files.wordpress.com/2014/08/snmp29.png?w=288

  • Step 1 -> Click the Configuration Tab.
  • Step 2 -> Click on the Edit button.

http://edwardvbs.files.wordpress.com/2014/08/snmp30.png?w=295

  • Double click the object identifier we created earlier and delete the information.
  • Click OK.

Discover SNMP Devices

http://edwardvbs.files.wordpress.com/2014/08/snmp31.png?w=300

  • Step 1 -> Click the Administration tab.
  • Step 2 -> Click on Discovery Rules.

http://edwardvbs.files.wordpress.com/2014/08/snmp32.png?w=180

  • Step 1 -> Right click Discovery Rules.
  • Step 2 -> Click on the Discovery Wizard option.

http://edwardvbs.files.wordpress.com/2014/08/snmp33.png?w=300

  • Step 1 -> Click on Network Devices.
  • Step 2 -> Click the Next button.

http://edwardvbs.files.wordpress.com/2014/08/snmp34.png?w=300

  • Step 1 -> Enter in a name.
  • Step 2 -> Select your management server.
  • Step 3 -> Click on the “Create Resource Pool” button.

http://edwardvbs.files.wordpress.com/2014/08/snmp35.png?w=300

  • Step 1a -> Enter in the Name for the New Resource Pool.
  • Optional - > give a description.
  • Step 2b -> Click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp36.png?w=300

  • Click the “Add” Button.

http://edwardvbs.files.wordpress.com/2014/08/snmp37.png?w=300

  • Step 1 -> Click the Search button.
  • Step 2 -> Click the name of your management server.
  • Step 3 -> Click the “Add” button.
  • After you have completed step 3 your management server will show under the “Selected Items” section.
  • Click OK.

http://edwardvbs.files.wordpress.com/2014/08/snmp38.png?w=300

  • After adding in the info it will show in the box (as shown above). Click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp39.png?w=300

  • Confirm the settings. Click the Create Button.

http://edwardvbs.files.wordpress.com/2014/08/snmp40.png?w=300

  • Once it’s complete click the “Close” button.

http://edwardvbs.files.wordpress.com/2014/08/snmp41.png?w=300

  • Now that we have created a new resource pool it will list under the “Available Pools” section.
  • Click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp42.png?w=300

  • We going to use “Recursive Directory” click the radio button.
  • Click the next button.

http://edwardvbs.files.wordpress.com/2014/08/snmp43.png?w=300

  • On Default Accounts page we need to create an account. Step 1 -> Click on the “Create Account” button.

http://edwardvbs.files.wordpress.com/2014/08/snmp44.png?w=300

  • Step 1 -> Type in a display name.
  • Step 2 -> Click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp45.png?w=300

  • Step 1 -> Enter in the community string.
  • Step 2 -> Click the “Create” button.

http://edwardvbs.files.wordpress.com/2014/08/snmp46.png?w=300

  • The account we just created will be selected.
  • Click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp47.png?w=300

  • On this screen click the “Add” button.

http://edwardvbs.files.wordpress.com/2014/08/snmp48.png?w=300

  • Enter in the name or IP address. Make your other selections.
  • Click OK.

http://edwardvbs.files.wordpress.com/2014/08/snmp49.png?w=300

  • The information created in the previous screen will now show under “Devices”.
  • Click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp50.png?w=300

  • Leave the default selected.
  • Click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp51.png?w=300

  • If you want to exclude any IP's then click the "Add" button, else Click Next.

http://edwardvbs.files.wordpress.com/2014/08/snmp52.png?w=300

  • Make your selection.
  • Click the Next button.

http://edwardvbs.files.wordpress.com/2014/08/snmp53.png?w=300

  • On the summary screen confirm your settings.
  • Click the Create button.

http://edwardvbs.files.wordpress.com/2014/08/snmp54.png?w=300

  • When the following Warning comes up, make your selection. I click Yes.

http://edwardvbs.files.wordpress.com/2014/08/snmp55.png?w=300

  • Progress screen.

http://edwardvbs.files.wordpress.com/2014/08/snmp56.png?w=300

  • Once it finishes we can run the discovery wizard. Leave the checkbox selected and then click the close button.

http://edwardvbs.files.wordpress.com/2014/08/snmp57.png?w=300

  • Once you have clicked close the page above shows the progress circle.

http://edwardvbs.files.wordpress.com/2014/08/snmp58.png?w=300

  • As seen above we now see a status of Pending.
  • If you click on Network Devices Pending Management you will see any errors.