Message Tracking in Exchange Server 2010/2013

아티클
1/17/2024

Enabling or Disabling Message Tracking

Under the Sever Configuration -> Hub Transport -> Right click on the server and click properties as shown below:

http://www.techrid.com/wp-content/uploads/2015/07/MT1-300x99.png

Click on Server properties -> Go to Log Settings

http://www.techrid.com/wp-content/uploads/2015/07/MT2-300x89.png

Put check mark on Enable this feature, if you want to disable uncheck the box as shown above.

Also this can be performed using PowerShell

To check this feature on the Exchange Hub Transport below is the command

Syntax:

Get-TransportServer | Select Name, MessageTrackingLogEnabled | ft -Auto

http://www.techrid.com/wp-content/uploads/2015/07/MT3-300x43.png

To check this feature in the Mailbox server below is the command

Syntax:

Get-MailboxServer | Select Name, MessageTrackingLogEnabled |ft -Auto

http://www.techrid.com/wp-content/uploads/2015/07/MT4-300x45.png

By default

Max Age 30 Days

MaxDirectorySize 1GB and this can be extended

http://www.techrid.com/wp-content/uploads/2015/07/MT5-300x45.png

As said the feature MaxDirectorySize can be extended based on your requirement using the command:

Now if you check Directorysize it will be shown as the size that you have set

http://www.techrid.com/wp-content/uploads/2015/07/MT6-300x65.png

Now let’s see how to find the messages. Messages can be searched using Exchange Management Console (EMC) or Exchange Management Shell (EMS)

Exchange Management Console:

Open EMC -> Toolbox ->

http://www.techrid.com/wp-content/uploads/2015/07/MT7-300x121.png

Click Tracking Log Explorer for tracking messages to granular level as shown below:

http://www.techrid.com/wp-content/uploads/2015/07/MT8-300x140.png

Now let’s track the messages using Exchange Management Shell

PowerShell

The above message can be executed

Syntax:

Get-ExchangeServer | where {$_.isHubTransportServer -eq $true -or $_.isMailboxServer -eq $true} | Get-MessageTrackingLog -MessageId “da18339e-8151-4ff3-aeea-87ccf5fc9796@techrid.com” | Select-Object Timestamp,ServerHostname,ClientHostname,Source,EventId,Recipients | Sort-Object -Property Timestamp

The above syntax needs to be changed based on your requirement

Let’s go ahead message tracking user level using PowerShell commands:

Find messages by sender:

Get-MessageTrackingLog -sender “peppili@techrid.com”

Find messages by recipient:

Get-MessageTrackingLog -recipients “peppili@techrid.com”

Messages received or messages delivered to the mailbox:

You can further separate these by message received:

Get-MessageTrackingLog -sender “peppili@techrid.com” -eventID RECEIVE

Messages delivered to the mailbox

Get-MessageTrackingLog -sender “peppili@techrid.com” -eventID DELIVER

Start and End date/time:

To further constrain these by Start and End times:

Get-MessageTrackingLog -sender peppili@techrid.com -eventID DELIVER -Start “6/30/2015 01:00PM” -End “6/30/2015 03:00PM”

Formatting output

To show only selected fields, you can pipe the output to the Select-Object command, and specify the fields required. Here we want the timestamp, recipients, and subject fields:

Get-MessageTrackingLog -sender “peppili@techrid.com” -eventID DELIVER -Start “6/30/2015 01:00PM” -End “6/30/2015 03:00PM” | Select timestamp,recipients,messagesubject

To get all fields from a message in a list format, you can pipe the output into a fl (format list).

By default, the Get-MessageTrackingLog command returns up to 1000 results. This can be hard to work with in a command screen that keeps scrolling endlessly. In addition to the above parameters used to filter the logs, you can also restrict the number of results returned using the ResultSize parameter.

Get-MessageTrackingLog -sender “peppili@techrid.com” -eventID DELIVER -Start “6/30/2015 01:00PM” -End “6/30/2015 03:00PM” -ResultSize 25

For Message tracking rather using EMC Tool using EMS will be much faster.

Tracking Messages sent to Distribution List

Most of the times situations come where administrators need to track messages sent to DL

Here below command might useful to track messages sent to DL

http://www.techrid.com/wp-content/uploads/2015/07/MT9-300x14.png

Note: No emails sent as it’s my Lab environment :).

Here we can also use the switch “-Autosize” even export to csv file as shown below:

Get-MessageTrackingLog -Start 06/29/2015 -EventID Expand | ft Timestamp,RelatedRecipientAddress -Autosize >C:\Message.csv

If we want to know how many messages received to that DL, this can be done by using small parameter as “Group-Object”

http://www.techrid.com/wp-content/uploads/2015/07/MT10-300x31.png

Messages sent to particular DL

Get-MessageTrackingLog -EventID Expand | ? {$_.RelatedRecipientAddress -like “IT-Helpdesk@contoso.com”} | ft Timestamp,Sender,MessageSubject -Autosize

Tracking Messages by Subject

Another good thing is here we can use “-MessageSubject” parameter while tracking messages. First we need to make sure that if this option is Enabled or not if not we can Enable this

So to check this feature run the command

Get-TransportServer | select name,*subject* | ft -auto

http://www.techrid.com/wp-content/uploads/2015/07/MT11-300x85.png

If it’s not Enabled you need to run the command as Set-TransportServer

Once after Enabling this you can Search the Message using “-MessageSubject”

http://www.techrid.com/wp-content/uploads/2015/07/MT12-300x28.png

Now let’s Track messages with EventID using PowerShell

Small Command

Get-MessageTrackingLog -ResultSize Unlimited | Group-Object -Property:EventId | Sort-Object Count -Desc | Select Name,Count

http://www.techrid.com/wp-content/uploads/2015/07/MT13-300x25.png

http://www.techrid.com/wp-content/uploads/2015/07/MT14-300x97.png

Great from this we have learnt Message tracking using EMC and EMS.