다음을 통해 공유


AssemblyBuilder.Save 메서드

정의

이 동적 어셈블리를 디스크에 저장합니다.

오버로드

Save(String)

이 동적 어셈블리를 디스크에 저장합니다.

Save(String, PortableExecutableKinds, ImageFileMachine)

이 동적 어셈블리를 디스크에 저장하고, 어셈블리의 실행 파일 및 대상 플랫폼에 코드의 특성을 지정합니다.

Save(String)

Source:
AssemblyBuilder.cs

이 동적 어셈블리를 디스크에 저장합니다.

public:
 void Save(System::String ^ assemblyFileName);
public void Save (string assemblyFileName);
member this.Save : string -> unit
Public Sub Save (assemblyFileName As String)

매개 변수

assemblyFileName
String

어셈블리의 파일 이름입니다.

예외

assemblyFileName의 길이가 0입니다.

또는

어셈블리에 동일한 이름의 모듈 리소스 파일이 두 개 이상 있는 경우

또는

어셈블리의 대상 디렉터리가 잘못된 경우

또는

assemblyFileName 이 단순한 파일 이름이 아니거나(예: 디렉터리 또는 드라이브 구성 요소 있음), 이 어셈블리에 둘 이상의 관리되지 않는 리소스(버전 정보 리소스 포함)가 정의되어 있습니다.

또는

CultureInfoAssemblyCultureAttribute 문자열이 유효한 문자열이 아니거나 DefineVersionInfoResource(String, String, String, String, String) 가 이 메서드 호출 전에 호출되었습니다.

assemblyFileName이(가) null인 경우

해당 어셈블리가 이미 저장되어 있는 경우

또는

이 어셈블리에 RunAssemblyBuilderAccess

저장하는 동안 출력 오류가 발생한 경우

어셈블리의 모듈에 있는 형식이 디스크에 기록되도록CreateType() 이 호출되지 않았습니다.

예제

다음 코드 샘플에서는 동적 어셈블리를 만든 다음 를 사용하여 Save로컬 디스크에 유지합니다.

using namespace System;
using namespace System::Text;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;

// The Point class is the class we will reflect on and copy into our
// dynamic assembly. The public static function PointMain() will be used
// as our entry point.
//
// We are constructing the type seen here dynamically, and will write it
// out into a .exe file for later execution from the command-line.
// ---
// __gc class Point {
// 
// private:
//    int  x;
//    int  y;
// 
// public:
//    Point(int ix, int iy) {
// 
//       this->x = ix;
//       this->y = iy;
// 
//    }
// 
//    int DotProduct (Point* p) {
// 
//       return ((this->x * p->x) + (this->y * p->y));
// 
//   }
// 
//    static void PointMain() {
// 
//       Console::Write(S"Enter the 'x' value for point 1: ");
//       int x1 = Convert::ToInt32(Console::ReadLine());
// 
//       Console::Write(S"Enter the 'y' value for point 1: ");
//       int y1 = Convert::ToInt32(Console::ReadLine());
// 
//       Console::Write(S"Enter the 'x' value for point 2: ");
//       int x2 = Convert::ToInt32(Console::ReadLine());
// 
//       Console::Write(S"Enter the 'y' value for point 2: ");
//       int y2 = Convert::ToInt32(Console::ReadLine());
// 
//       Point* p1 = new Point(x1, y1);
//       Point* p2 = new Point(x2, y2);
// 
//       Console::WriteLine(S"( {0}, {1}) . ( {2}, {3}) = {4}.",
//          __box(x1), __box(y1), __box(x2), __box(y2), p1->DotProduct(p2));
// 
//    }
// 
// };
// ---
Type^ BuildDynAssembly()
{
   Type^ pointType = nullptr;
   AppDomain^ currentDom = Thread::GetDomain();
   Console::Write( "Please enter a name for your new assembly: " );
   StringBuilder^ asmFileNameBldr = gcnew StringBuilder;
   asmFileNameBldr->Append( Console::ReadLine() );
   asmFileNameBldr->Append( ".exe" );
   String^ asmFileName = asmFileNameBldr->ToString();
   AssemblyName^ myAsmName = gcnew AssemblyName;
   myAsmName->Name = "MyDynamicAssembly";
   AssemblyBuilder^ myAsmBldr = currentDom->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
   
   // We've created a dynamic assembly space - now, we need to create a module
   // within it to reflect the type Point into.
   ModuleBuilder^ myModuleBldr = myAsmBldr->DefineDynamicModule( asmFileName, asmFileName );
   TypeBuilder^ myTypeBldr = myModuleBldr->DefineType( "Point" );
   FieldBuilder^ xField = myTypeBldr->DefineField( "x", int::typeid, FieldAttributes::Private );
   FieldBuilder^ yField = myTypeBldr->DefineField( "y", int::typeid, FieldAttributes::Private );
   
   // Build the constructor.
   Type^ objType = Type::GetType( "System.Object" );
   ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
   array<Type^>^temp4 = {int::typeid,int::typeid};
   array<Type^>^ctorParams = temp4;
   ConstructorBuilder^ pointCtor = myTypeBldr->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
   ILGenerator^ ctorIL = pointCtor->GetILGenerator();
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Call, objCtor );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_1 );
   ctorIL->Emit( OpCodes::Stfld, xField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_2 );
   ctorIL->Emit( OpCodes::Stfld, yField );
   ctorIL->Emit( OpCodes::Ret );
   
   // Build the DotProduct method.
   Console::WriteLine( "Constructor built." );
   array<Type^>^temp0 = {myTypeBldr};
   MethodBuilder^ pointDPBldr = myTypeBldr->DefineMethod( "DotProduct", MethodAttributes::Public, int::typeid, temp0 );
   ILGenerator^ dpIL = pointDPBldr->GetILGenerator();
   dpIL->Emit( OpCodes::Ldarg_0 );
   dpIL->Emit( OpCodes::Ldfld, xField );
   dpIL->Emit( OpCodes::Ldarg_1 );
   dpIL->Emit( OpCodes::Ldfld, xField );
   dpIL->Emit( OpCodes::Mul_Ovf_Un );
   dpIL->Emit( OpCodes::Ldarg_0 );
   dpIL->Emit( OpCodes::Ldfld, yField );
   dpIL->Emit( OpCodes::Ldarg_1 );
   dpIL->Emit( OpCodes::Ldfld, yField );
   dpIL->Emit( OpCodes::Mul_Ovf_Un );
   dpIL->Emit( OpCodes::Add_Ovf_Un );
   dpIL->Emit( OpCodes::Ret );
   
   // Build the PointMain method.
   Console::WriteLine( "DotProduct built." );
   MethodBuilder^ pointMainBldr = myTypeBldr->DefineMethod( "PointMain", static_cast<MethodAttributes>(MethodAttributes::Public | MethodAttributes::Static), void::typeid, nullptr );
   pointMainBldr->InitLocals = true;
   ILGenerator^ pmIL = pointMainBldr->GetILGenerator();
   
   // We have four methods that we wish to call, and must represent as
   // MethodInfo tokens:
   // - void Console::WriteLine(String*)
   // - String* Console::ReadLine()
   // - int Convert::Int32(String*)
   // - void Console::WriteLine(String*, Object*[])
   array<Type^>^temp1 = {String::typeid};
   MethodInfo^ writeMI = Console::typeid->GetMethod( "Write", temp1 );
   MethodInfo^ readLineMI = Console::typeid->GetMethod( "ReadLine", gcnew array<Type^>(0) );
   array<Type^>^temp2 = {String::typeid};
   MethodInfo^ convertInt32MI = Convert::typeid->GetMethod( "ToInt32", temp2 );
   array<Type^>^temp5 = {String::typeid,array<Object^>::typeid};
   array<Type^>^wlParams = temp5;
   MethodInfo^ writeLineMI = Console::typeid->GetMethod( "WriteLine", wlParams );
   
   // Although we could just refer to the local variables by
   // index (short ints for Ldloc/Stloc, bytes for LdLoc_S/Stloc_S),
   // this time, we'll use LocalBuilders for clarity and to
   // demonstrate their usage and syntax.
   LocalBuilder^ x1LB = pmIL->DeclareLocal( int::typeid );
   LocalBuilder^ y1LB = pmIL->DeclareLocal( int::typeid );
   LocalBuilder^ x2LB = pmIL->DeclareLocal( int::typeid );
   LocalBuilder^ y2LB = pmIL->DeclareLocal( int::typeid );
   LocalBuilder^ point1LB = pmIL->DeclareLocal( myTypeBldr );
   LocalBuilder^ point2LB = pmIL->DeclareLocal( myTypeBldr );
   LocalBuilder^ tempObjArrLB = pmIL->DeclareLocal( array<Object^>::typeid );
   pmIL->Emit( OpCodes::Ldstr, "Enter the 'x' value for point 1: " );
   pmIL->EmitCall( OpCodes::Call, writeMI, nullptr );
   pmIL->EmitCall( OpCodes::Call, readLineMI, nullptr );
   pmIL->EmitCall( OpCodes::Call, convertInt32MI, nullptr );
   pmIL->Emit( OpCodes::Stloc, x1LB );
   pmIL->Emit( OpCodes::Ldstr, "Enter the 'y' value for point 1: " );
   pmIL->EmitCall( OpCodes::Call, writeMI, nullptr );
   pmIL->EmitCall( OpCodes::Call, readLineMI, nullptr );
   pmIL->EmitCall( OpCodes::Call, convertInt32MI, nullptr );
   pmIL->Emit( OpCodes::Stloc, y1LB );
   pmIL->Emit( OpCodes::Ldstr, "Enter the 'x' value for point 2: " );
   pmIL->EmitCall( OpCodes::Call, writeMI, nullptr );
   pmIL->EmitCall( OpCodes::Call, readLineMI, nullptr );
   pmIL->EmitCall( OpCodes::Call, convertInt32MI, nullptr );
   pmIL->Emit( OpCodes::Stloc, x2LB );
   pmIL->Emit( OpCodes::Ldstr, "Enter the 'y' value for point 2: " );
   pmIL->EmitCall( OpCodes::Call, writeMI, nullptr );
   pmIL->EmitCall( OpCodes::Call, readLineMI, nullptr );
   pmIL->EmitCall( OpCodes::Call, convertInt32MI, nullptr );
   pmIL->Emit( OpCodes::Stloc, y2LB );
   pmIL->Emit( OpCodes::Ldloc, x1LB );
   pmIL->Emit( OpCodes::Ldloc, y1LB );
   pmIL->Emit( OpCodes::Newobj, pointCtor );
   pmIL->Emit( OpCodes::Stloc, point1LB );
   pmIL->Emit( OpCodes::Ldloc, x2LB );
   pmIL->Emit( OpCodes::Ldloc, y2LB );
   pmIL->Emit( OpCodes::Newobj, pointCtor );
   pmIL->Emit( OpCodes::Stloc, point2LB );
   pmIL->Emit( OpCodes::Ldstr, "( {0}, {1}) . ( {2}, {3}) = {4}." );
   pmIL->Emit( OpCodes::Ldc_I4_5 );
   pmIL->Emit( OpCodes::Newarr, Object::typeid );
   pmIL->Emit( OpCodes::Stloc, tempObjArrLB );
   pmIL->Emit( OpCodes::Ldloc, tempObjArrLB );
   pmIL->Emit( OpCodes::Ldc_I4_0 );
   pmIL->Emit( OpCodes::Ldloc, x1LB );
   pmIL->Emit( OpCodes::Box, int::typeid );
   pmIL->Emit( OpCodes::Stelem_Ref );
   pmIL->Emit( OpCodes::Ldloc, tempObjArrLB );
   pmIL->Emit( OpCodes::Ldc_I4_1 );
   pmIL->Emit( OpCodes::Ldloc, y1LB );
   pmIL->Emit( OpCodes::Box, int::typeid );
   pmIL->Emit( OpCodes::Stelem_Ref );
   pmIL->Emit( OpCodes::Ldloc, tempObjArrLB );
   pmIL->Emit( OpCodes::Ldc_I4_2 );
   pmIL->Emit( OpCodes::Ldloc, x2LB );
   pmIL->Emit( OpCodes::Box, int::typeid );
   pmIL->Emit( OpCodes::Stelem_Ref );
   pmIL->Emit( OpCodes::Ldloc, tempObjArrLB );
   pmIL->Emit( OpCodes::Ldc_I4_3 );
   pmIL->Emit( OpCodes::Ldloc, y2LB );
   pmIL->Emit( OpCodes::Box, int::typeid );
   pmIL->Emit( OpCodes::Stelem_Ref );
   pmIL->Emit( OpCodes::Ldloc, tempObjArrLB );
   pmIL->Emit( OpCodes::Ldc_I4_4 );
   pmIL->Emit( OpCodes::Ldloc, point1LB );
   pmIL->Emit( OpCodes::Ldloc, point2LB );
   pmIL->EmitCall( OpCodes::Callvirt, pointDPBldr, nullptr );
   pmIL->Emit( OpCodes::Box, int::typeid );
   pmIL->Emit( OpCodes::Stelem_Ref );
   pmIL->Emit( OpCodes::Ldloc, tempObjArrLB );
   pmIL->EmitCall( OpCodes::Call, writeLineMI, nullptr );
   pmIL->Emit( OpCodes::Ret );
   Console::WriteLine( "PointMain (entry point) built." );
   pointType = myTypeBldr->CreateType();
   Console::WriteLine( "Type completed." );
   myAsmBldr->SetEntryPoint( pointMainBldr );
   myAsmBldr->Save( asmFileName );
   Console::WriteLine( "Assembly saved as ' {0}'.", asmFileName );
   Console::WriteLine( "Type ' {0}' at the prompt to run your new dynamically generated dot product calculator.", asmFileName );
   
   // After execution, this program will have generated and written to disk,
   // in the directory you executed it from, a program named
   // <name_you_entered_here>.exe. You can run it by typing
   // the name you gave it during execution, in the same directory where
   // you executed this program.
   return pointType;
}

int main()
{
   Type^ myType = BuildDynAssembly();
   Console::WriteLine( "---" );
   
   // Let's invoke the type 'Point' created in our dynamic assembly.
   array<Object^>^temp3 = {nullptr,nullptr};
   Object^ ptInstance = Activator::CreateInstance( myType, temp3 );
   myType->InvokeMember( "PointMain", BindingFlags::InvokeMethod, nullptr, ptInstance, gcnew array<Object^>(0) );
}
using System;
using System.Text;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;

// The Point class is the class we will reflect on and copy into our
// dynamic assembly. The public static function PointMain() will be used
// as our entry point.
//
// We are constructing the type seen here dynamically, and will write it
// out into a .exe file for later execution from the command-line.
// ---
// class Point {
//
//   private int x;
//   private int y;
//
//   public Point(int ix, int iy) {
//
//   	this.x = ix;
//    	this.y = iy;
//
//   }
//
//   public int DotProduct (Point p) {
//
//   	return ((this.x * p.x) + (this.y * p.y));
//
//   }
//
//   public static void PointMain() {
//
//     Console.Write("Enter the 'x' value for point 1: ");
//     int x1 = Convert.ToInt32(Console.ReadLine());
//
//     Console.Write("Enter the 'y' value for point 1: ");
//     int y1 = Convert.ToInt32(Console.ReadLine());
//
//     Console.Write("Enter the 'x' value for point 2: ");
//     int x2 = Convert.ToInt32(Console.ReadLine());
//
//     Console.Write("Enter the 'y' value for point 2: ");
//     int y2 = Convert.ToInt32(Console.ReadLine());
//
//     Point p1 = new Point(x1, y1);
//     Point p2 = new Point(x2, y2);
//
//     Console.WriteLine("({0}, {1}) . ({2}, {3}) = {4}.",
//		       x1, y1, x2, y2, p1.DotProduct(p2));
//
//   }
//
// }
// ---

class AssemblyBuilderDemo {

   public static Type BuildDynAssembly() {

        Type pointType = null;

        AppDomain currentDom = Thread.GetDomain();

    Console.Write("Please enter a name for your new assembly: ");
    StringBuilder asmFileNameBldr = new StringBuilder();
        asmFileNameBldr.Append(Console.ReadLine());
    asmFileNameBldr.Append(".exe");
    string asmFileName = asmFileNameBldr.ToString();	

        AssemblyName myAsmName = new AssemblyName();
    myAsmName.Name = "MyDynamicAssembly";

        AssemblyBuilder myAsmBldr = currentDom.DefineDynamicAssembly(
                           myAsmName,
                           AssemblyBuilderAccess.RunAndSave);

        // We've created a dynamic assembly space - now, we need to create a module
        // within it to reflect the type Point into.

    ModuleBuilder myModuleBldr = myAsmBldr.DefineDynamicModule(asmFileName,
                                       asmFileName);

    TypeBuilder myTypeBldr =  myModuleBldr.DefineType("Point");

        FieldBuilder xField = myTypeBldr.DefineField("x", typeof(int),
                                                     FieldAttributes.Private);
        FieldBuilder yField = myTypeBldr.DefineField("y", typeof(int),
                                                     FieldAttributes.Private);

        // Build the constructor.

        Type objType = Type.GetType("System.Object");
        ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);

        Type[] ctorParams = new Type[] {typeof(int), typeof(int)};
        ConstructorBuilder pointCtor = myTypeBldr.DefineConstructor(
                                  MethodAttributes.Public,
                                  CallingConventions.Standard,
                                  ctorParams);
        ILGenerator ctorIL = pointCtor.GetILGenerator();
        ctorIL.Emit(OpCodes.Ldarg_0);
        ctorIL.Emit(OpCodes.Call, objCtor);
        ctorIL.Emit(OpCodes.Ldarg_0);
        ctorIL.Emit(OpCodes.Ldarg_1);
        ctorIL.Emit(OpCodes.Stfld, xField);
        ctorIL.Emit(OpCodes.Ldarg_0);
        ctorIL.Emit(OpCodes.Ldarg_2);
        ctorIL.Emit(OpCodes.Stfld, yField);
        ctorIL.Emit(OpCodes.Ret);

    // Build the DotProduct method.

        Console.WriteLine("Constructor built.");

    MethodBuilder pointDPBldr = myTypeBldr.DefineMethod("DotProduct",
                                MethodAttributes.Public,
                                typeof(int),
                                new Type[] {myTypeBldr});
                            
    ILGenerator dpIL = pointDPBldr.GetILGenerator();
    dpIL.Emit(OpCodes.Ldarg_0);
    dpIL.Emit(OpCodes.Ldfld, xField);
    dpIL.Emit(OpCodes.Ldarg_1);
    dpIL.Emit(OpCodes.Ldfld, xField);
    dpIL.Emit(OpCodes.Mul_Ovf_Un);
    dpIL.Emit(OpCodes.Ldarg_0);
    dpIL.Emit(OpCodes.Ldfld, yField);
    dpIL.Emit(OpCodes.Ldarg_1);
    dpIL.Emit(OpCodes.Ldfld, yField);
    dpIL.Emit(OpCodes.Mul_Ovf_Un);
    dpIL.Emit(OpCodes.Add_Ovf_Un);
    dpIL.Emit(OpCodes.Ret);

    // Build the PointMain method.

        Console.WriteLine("DotProduct built.");

    MethodBuilder pointMainBldr = myTypeBldr.DefineMethod("PointMain",
                                MethodAttributes.Public |
                                MethodAttributes.Static,
                                typeof(void),
                                null);
        pointMainBldr.InitLocals = true;
    ILGenerator pmIL = pointMainBldr.GetILGenerator();

    // We have four methods that we wish to call, and must represent as
    // MethodInfo tokens:
    // - void Console.WriteLine(string)
    // - string Console.ReadLine()
    // - int Convert.Int32(string)
    // - void Console.WriteLine(string, object[])

    MethodInfo writeMI = typeof(Console).GetMethod(
                         "Write",
                         new Type[] {typeof(string)});
    MethodInfo readLineMI = typeof(Console).GetMethod(
                            "ReadLine",
                            new Type[0]);
    MethodInfo convertInt32MI = typeof(Convert).GetMethod(
                            "ToInt32",
                                new Type[] {typeof(string)});
    Type[] wlParams = new Type[] {typeof(string), typeof(object[])};
    MethodInfo writeLineMI = typeof(Console).GetMethod(
                         "WriteLine",
                         wlParams);

    // Although we could just refer to the local variables by
    // index (short ints for Ldloc/Stloc, bytes for LdLoc_S/Stloc_S),
    // this time, we'll use LocalBuilders for clarity and to
    // demonstrate their usage and syntax.

    LocalBuilder x1LB = pmIL.DeclareLocal(typeof(int));				
    LocalBuilder y1LB = pmIL.DeclareLocal(typeof(int));				
    LocalBuilder x2LB = pmIL.DeclareLocal(typeof(int));				
    LocalBuilder y2LB = pmIL.DeclareLocal(typeof(int));				
    LocalBuilder point1LB = pmIL.DeclareLocal(myTypeBldr);				
    LocalBuilder point2LB = pmIL.DeclareLocal(myTypeBldr);				
    LocalBuilder tempObjArrLB = pmIL.DeclareLocal(typeof(object[]));				

    pmIL.Emit(OpCodes.Ldstr, "Enter the 'x' value for point 1: ");	
    pmIL.EmitCall(OpCodes.Call, writeMI, null);
    pmIL.EmitCall(OpCodes.Call, readLineMI, null);
    pmIL.EmitCall(OpCodes.Call, convertInt32MI, null);
    pmIL.Emit(OpCodes.Stloc, x1LB);

    pmIL.Emit(OpCodes.Ldstr, "Enter the 'y' value for point 1: ");	
    pmIL.EmitCall(OpCodes.Call, writeMI, null);
    pmIL.EmitCall(OpCodes.Call, readLineMI, null);
    pmIL.EmitCall(OpCodes.Call, convertInt32MI, null);
    pmIL.Emit(OpCodes.Stloc, y1LB);

    pmIL.Emit(OpCodes.Ldstr, "Enter the 'x' value for point 2: ");	
    pmIL.EmitCall(OpCodes.Call, writeMI, null);
    pmIL.EmitCall(OpCodes.Call, readLineMI, null);
    pmIL.EmitCall(OpCodes.Call, convertInt32MI, null);
    pmIL.Emit(OpCodes.Stloc, x2LB);

    pmIL.Emit(OpCodes.Ldstr, "Enter the 'y' value for point 2: ");	
    pmIL.EmitCall(OpCodes.Call, writeMI, null);
    pmIL.EmitCall(OpCodes.Call, readLineMI, null);
    pmIL.EmitCall(OpCodes.Call, convertInt32MI, null);
    pmIL.Emit(OpCodes.Stloc, y2LB);

    pmIL.Emit(OpCodes.Ldloc, x1LB);
    pmIL.Emit(OpCodes.Ldloc, y1LB);
    pmIL.Emit(OpCodes.Newobj, pointCtor);
    pmIL.Emit(OpCodes.Stloc, point1LB);

    pmIL.Emit(OpCodes.Ldloc, x2LB);
    pmIL.Emit(OpCodes.Ldloc, y2LB);
    pmIL.Emit(OpCodes.Newobj, pointCtor);
    pmIL.Emit(OpCodes.Stloc, point2LB);

    pmIL.Emit(OpCodes.Ldstr, "({0}, {1}) . ({2}, {3}) = {4}.");
    pmIL.Emit(OpCodes.Ldc_I4_5);
    pmIL.Emit(OpCodes.Newarr, typeof(Object));
    pmIL.Emit(OpCodes.Stloc, tempObjArrLB);

    pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
    pmIL.Emit(OpCodes.Ldc_I4_0);
    pmIL.Emit(OpCodes.Ldloc, x1LB);
    pmIL.Emit(OpCodes.Box, typeof(int));
    pmIL.Emit(OpCodes.Stelem_Ref);

    pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
    pmIL.Emit(OpCodes.Ldc_I4_1);
    pmIL.Emit(OpCodes.Ldloc, y1LB);
    pmIL.Emit(OpCodes.Box, typeof(int));
    pmIL.Emit(OpCodes.Stelem_Ref);

    pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
    pmIL.Emit(OpCodes.Ldc_I4_2);
    pmIL.Emit(OpCodes.Ldloc, x2LB);
    pmIL.Emit(OpCodes.Box, typeof(int));
    pmIL.Emit(OpCodes.Stelem_Ref);

    pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
    pmIL.Emit(OpCodes.Ldc_I4_3);
    pmIL.Emit(OpCodes.Ldloc, y2LB);
    pmIL.Emit(OpCodes.Box, typeof(int));
    pmIL.Emit(OpCodes.Stelem_Ref);

    pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
    pmIL.Emit(OpCodes.Ldc_I4_4);
    pmIL.Emit(OpCodes.Ldloc, point1LB);
    pmIL.Emit(OpCodes.Ldloc, point2LB);
    pmIL.EmitCall(OpCodes.Callvirt, pointDPBldr, null);

    pmIL.Emit(OpCodes.Box, typeof(int));
    pmIL.Emit(OpCodes.Stelem_Ref);
    pmIL.Emit(OpCodes.Ldloc, tempObjArrLB);
    pmIL.EmitCall(OpCodes.Call, writeLineMI, null);

    pmIL.Emit(OpCodes.Ret);

        Console.WriteLine("PointMain (entry point) built.");

        pointType = myTypeBldr.CreateType();

        Console.WriteLine("Type completed.");

    myAsmBldr.SetEntryPoint(pointMainBldr);

        myAsmBldr.Save(asmFileName);

        Console.WriteLine("Assembly saved as '{0}'.", asmFileName);
        Console.WriteLine("Type '{0}' at the prompt to run your new " +
                  "dynamically generated dot product calculator.",
               asmFileName);

    // After execution, this program will have generated and written to disk,
        // in the directory you executed it from, a program named
    // <name_you_entered_here>.exe. You can run it by typing
    // the name you gave it during execution, in the same directory where
    // you executed this program.

    return pointType;
   }

   public static void Main() {

     Type myType = BuildDynAssembly();
     Console.WriteLine("---");

     // Let's invoke the type 'Point' created in our dynamic assembly.

     object ptInstance = Activator.CreateInstance(myType, new object[] {0,0});
                        
     myType.InvokeMember("PointMain",
              BindingFlags.InvokeMethod,
              null,
              ptInstance,
              new object[0]);
   }
}
Imports System.Text
Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit

 _

' The Point class is the class we will reflect on and copy into our
' dynamic assembly. The public static function PointMain() will be used
' as our entry point.
'
' We are constructing the type seen here dynamically, and will write it
' out into a .exe file for later execution from the command-line.
' --- 
' Class Point
'    
'    Private x As Integer
'    Private y As Integer
'    
'    
'    Public Sub New(ix As Integer, iy As Integer)
'       
'       Me.x = ix
'       Me.y = iy
'    End Sub
'     
'    
'    Public Function DotProduct(p As Point) As Integer
'       
'       Return Me.x * p.x + Me.y * p.y
'    End Function 'DotProduct
'     
'    
'    Public Shared Sub Main()
'       
'       Console.Write("Enter the 'x' value for point 1: ")
'       Dim x1 As Integer = Convert.ToInt32(Console.ReadLine())
'       
'       Console.Write("Enter the 'y' value for point 1: ")
'       Dim y1 As Integer = Convert.ToInt32(Console.ReadLine())
'       
'       Console.Write("Enter the 'x' value for point 2: ")
'       Dim x2 As Integer = Convert.ToInt32(Console.ReadLine())
'       
'       Console.Write("Enter the 'y' value for point 2: ")
'       Dim y2 As Integer = Convert.ToInt32(Console.ReadLine())
'       
'       Dim p1 As New Point(x1, y1)
'       Dim p2 As New Point(x2, y2)
'       
'       Console.WriteLine("({0}, {1}) . ({2}, {3}) = {4}.", x1, y1, x2, y2, p1.DotProduct(p2))
'    End Sub
' End Class
' ---
Class AssemblyBuilderDemo
   
   
   Public Shared Function BuildDynAssembly() As Type
      
      Dim pointType As Type = Nothing
      
      Dim currentDom As AppDomain = Thread.GetDomain()
      
      Console.Write("Please enter a name for your new assembly: ")
      Dim asmFileNameBldr As New StringBuilder()
      asmFileNameBldr.Append(Console.ReadLine())
      asmFileNameBldr.Append(".exe")
      Dim asmFileName As String = asmFileNameBldr.ToString()
      
      Dim myAsmName As New AssemblyName()
      myAsmName.Name = "MyDynamicAssembly"
      
      Dim myAsmBldr As AssemblyBuilder = currentDom.DefineDynamicAssembly(myAsmName, _
                     AssemblyBuilderAccess.RunAndSave)
      
      ' We've created a dynamic assembly space - now, we need to create a module
      ' within it to reflect the type Point into.
      Dim myModuleBldr As ModuleBuilder = myAsmBldr.DefineDynamicModule(asmFileName, _
                                    asmFileName)
      
      Dim myTypeBldr As TypeBuilder = myModuleBldr.DefineType("Point")
      
      Dim xField As FieldBuilder = myTypeBldr.DefineField("x", GetType(Integer), _
                                  FieldAttributes.Private)
      Dim yField As FieldBuilder = myTypeBldr.DefineField("y", GetType(Integer), _
                              FieldAttributes.Private)
      
      ' Build the constructor.
      Dim objType As Type = Type.GetType("System.Object")
      Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type() {})
      
      Dim ctorParams() As Type = {GetType(Integer), GetType(Integer)}
      Dim pointCtor As ConstructorBuilder = myTypeBldr.DefineConstructor( _
                        MethodAttributes.Public, _
                        CallingConventions.Standard, _
                        ctorParams)
      Dim ctorIL As ILGenerator = pointCtor.GetILGenerator()
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Call, objCtor)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_1)
      ctorIL.Emit(OpCodes.Stfld, xField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_2)
      ctorIL.Emit(OpCodes.Stfld, yField)
      ctorIL.Emit(OpCodes.Ret)
      
      ' Build the DotProduct method.
      Console.WriteLine("Constructor built.")
      
      Dim pointDPBldr As MethodBuilder = myTypeBldr.DefineMethod("DotProduct", _
                                 MethodAttributes.Public, _
                                 GetType(Integer), _
                                 New Type(0) {myTypeBldr})
      
      Dim dpIL As ILGenerator = pointDPBldr.GetILGenerator()
      dpIL.Emit(OpCodes.Ldarg_0)
      dpIL.Emit(OpCodes.Ldfld, xField)
      dpIL.Emit(OpCodes.Ldarg_1)
      dpIL.Emit(OpCodes.Ldfld, xField)
      dpIL.Emit(OpCodes.Mul_Ovf_Un)
      dpIL.Emit(OpCodes.Ldarg_0)
      dpIL.Emit(OpCodes.Ldfld, yField)
      dpIL.Emit(OpCodes.Ldarg_1)
      dpIL.Emit(OpCodes.Ldfld, yField)
      dpIL.Emit(OpCodes.Mul_Ovf_Un)
      dpIL.Emit(OpCodes.Add_Ovf_Un)
      dpIL.Emit(OpCodes.Ret)
      
      ' Build the PointMain method.
      Console.WriteLine("DotProduct built.")
      
      Dim pointMainBldr As MethodBuilder = myTypeBldr.DefineMethod("PointMain", _
                              MethodAttributes.Public Or _
                              MethodAttributes.Static, _
                              Nothing, Nothing)
      pointMainBldr.InitLocals = True
      Dim pmIL As ILGenerator = pointMainBldr.GetILGenerator()
      
      ' We have four methods that we wish to call, and must represent as
      ' MethodInfo tokens:
      ' - Sub Console.WriteLine(string)
      ' - Function Console.ReadLine() As String
      ' - Function Convert.Int32(string) As Int
      ' - Sub Console.WriteLine(string, object[])

      Dim writeMI As MethodInfo = GetType(Console).GetMethod("Write", _
                               New Type(0) {GetType(String)}) 
                                     
      Dim readLineMI As MethodInfo = GetType(Console).GetMethod("ReadLine", _
                              New Type() {})
      Dim convertInt32MI As MethodInfo = GetType(Convert).GetMethod("ToInt32", _
                              New Type(0) {GetType(String)})
      Dim wlParams() As Type = {GetType(String), GetType(Object())}
      Dim writeLineMI As MethodInfo = GetType(Console).GetMethod("WriteLine", wlParams)
      
      ' Although we could just refer to the local variables by
      ' index (short ints for Ldloc/Stloc, bytes for LdLoc_S/Stloc_S),
      ' this time, we'll use LocalBuilders for clarity and to
      ' demonstrate their usage and syntax.

      Dim x1LB As LocalBuilder = pmIL.DeclareLocal(GetType(Integer))
      Dim y1LB As LocalBuilder = pmIL.DeclareLocal(GetType(Integer))
      Dim x2LB As LocalBuilder = pmIL.DeclareLocal(GetType(Integer))
      Dim y2LB As LocalBuilder = pmIL.DeclareLocal(GetType(Integer))
      Dim point1LB As LocalBuilder = pmIL.DeclareLocal(myTypeBldr)
      Dim point2LB As LocalBuilder = pmIL.DeclareLocal(myTypeBldr)
      Dim tempObjArrLB As LocalBuilder = pmIL.DeclareLocal(GetType(Object()))
      
      pmIL.Emit(OpCodes.Ldstr, "Enter the 'x' value for point 1: ")
      pmIL.EmitCall(OpCodes.Call, writeMI, Nothing)
      pmIL.EmitCall(OpCodes.Call, readLineMI, Nothing)
      pmIL.EmitCall(OpCodes.Call, convertInt32MI, Nothing)
      pmIL.Emit(OpCodes.Stloc, x1LB)
      
      pmIL.Emit(OpCodes.Ldstr, "Enter the 'y' value for point 1: ")
      pmIL.EmitCall(OpCodes.Call, writeMI, Nothing)
      pmIL.EmitCall(OpCodes.Call, readLineMI, Nothing)
      pmIL.EmitCall(OpCodes.Call, convertInt32MI, Nothing)
      pmIL.Emit(OpCodes.Stloc, y1LB)
      
      pmIL.Emit(OpCodes.Ldstr, "Enter the 'x' value for point 2: ")
      pmIL.EmitCall(OpCodes.Call, writeMI, Nothing)
      pmIL.EmitCall(OpCodes.Call, readLineMI, Nothing)
      pmIL.EmitCall(OpCodes.Call, convertInt32MI, Nothing)
      pmIL.Emit(OpCodes.Stloc, x2LB)
      
      pmIL.Emit(OpCodes.Ldstr, "Enter the 'y' value for point 2: ")
      pmIL.EmitCall(OpCodes.Call, writeMI, Nothing)
      pmIL.EmitCall(OpCodes.Call, readLineMI, Nothing)
      pmIL.EmitCall(OpCodes.Call, convertInt32MI, Nothing)
      pmIL.Emit(OpCodes.Stloc, y2LB)
      
      pmIL.Emit(OpCodes.Ldloc, x1LB)
      pmIL.Emit(OpCodes.Ldloc, y1LB)
      pmIL.Emit(OpCodes.Newobj, pointCtor)
      pmIL.Emit(OpCodes.Stloc, point1LB)
      
      pmIL.Emit(OpCodes.Ldloc, x2LB)
      pmIL.Emit(OpCodes.Ldloc, y2LB)
      pmIL.Emit(OpCodes.Newobj, pointCtor)
      pmIL.Emit(OpCodes.Stloc, point2LB)
      
      pmIL.Emit(OpCodes.Ldstr, "({0}, {1}) . ({2}, {3}) = {4}.")
      pmIL.Emit(OpCodes.Ldc_I4_5)
      pmIL.Emit(OpCodes.Newarr, GetType([Object]))
      pmIL.Emit(OpCodes.Stloc, tempObjArrLB)
      
      pmIL.Emit(OpCodes.Ldloc, tempObjArrLB)
      pmIL.Emit(OpCodes.Ldc_I4_0)
      pmIL.Emit(OpCodes.Ldloc, x1LB)
      pmIL.Emit(OpCodes.Box, GetType(Integer))
      pmIL.Emit(OpCodes.Stelem_Ref)
      
      pmIL.Emit(OpCodes.Ldloc, tempObjArrLB)
      pmIL.Emit(OpCodes.Ldc_I4_1)
      pmIL.Emit(OpCodes.Ldloc, y1LB)
      pmIL.Emit(OpCodes.Box, GetType(Integer))
      pmIL.Emit(OpCodes.Stelem_Ref)
      
      pmIL.Emit(OpCodes.Ldloc, tempObjArrLB)
      pmIL.Emit(OpCodes.Ldc_I4_2)
      pmIL.Emit(OpCodes.Ldloc, x2LB)
      pmIL.Emit(OpCodes.Box, GetType(Integer))
      pmIL.Emit(OpCodes.Stelem_Ref)
      
      pmIL.Emit(OpCodes.Ldloc, tempObjArrLB)
      pmIL.Emit(OpCodes.Ldc_I4_3)
      pmIL.Emit(OpCodes.Ldloc, y2LB)
      pmIL.Emit(OpCodes.Box, GetType(Integer))
      pmIL.Emit(OpCodes.Stelem_Ref)
      
      pmIL.Emit(OpCodes.Ldloc, tempObjArrLB)
      pmIL.Emit(OpCodes.Ldc_I4_4)
      pmIL.Emit(OpCodes.Ldloc, point1LB)
      pmIL.Emit(OpCodes.Ldloc, point2LB)
      pmIL.EmitCall(OpCodes.Callvirt, pointDPBldr, Nothing)
      
      pmIL.Emit(OpCodes.Box, GetType(Integer))
      pmIL.Emit(OpCodes.Stelem_Ref)
      pmIL.Emit(OpCodes.Ldloc, tempObjArrLB)
      pmIL.EmitCall(OpCodes.Call, writeLineMI, Nothing)
      
      pmIL.Emit(OpCodes.Ret)
      
      Console.WriteLine("PointMain (entry point) built.")
      
      pointType = myTypeBldr.CreateType()
      
      Console.WriteLine("Type completed.")
      
      myAsmBldr.SetEntryPoint(pointMainBldr)
      
      myAsmBldr.Save(asmFileName)
      
      Console.WriteLine("Assembly saved as '{0}'.", asmFileName)
      Console.WriteLine("Type '{0}' at the prompt to run your new " + "dynamically generated dot product calculator.", asmFileName)
      
      ' After execution, this program will have generated and written to disk,
      ' in the directory you executed it from, a program named 
      ' <name_you_entered_here>.exe. You can run it by typing
      ' the name you gave it during execution, in the same directory where
      ' you executed this program.

      Return pointType

   End Function 'BuildDynAssembly
    
   
   Public Shared Sub Main()
      
      Dim myType As Type = BuildDynAssembly()
      Console.WriteLine("---")
      
      ' Let's invoke the type 'Point' created in our dynamic assembly. 
      Dim ptInstance As Object = Activator.CreateInstance(myType, New Object(1) {0, 0})
      
      myType.InvokeMember("PointMain", BindingFlags.InvokeMethod, _
              Nothing, ptInstance, New Object() {})

   End Sub

End Class

설명

참고

동적 어셈블리를 디스크에 저장하는 것은 .NET Framework 지원됩니다.

이 메서드는 이 동적 어셈블리에 정의된 모든 일시적이지 않은 동적 모듈을 저장합니다. 일시적인 동적 모듈은 저장되지 않습니다. 어셈블리 파일 이름은 모듈 중 하나의 이름과 같을 수 있습니다. 이 경우 어셈블리 매니페스트는 해당 모듈 내에 저장됩니다. assemblyFileName 는 어셈블리에 포함된 모든 모듈의 이름과 다를 수 있습니다. 이 경우 어셈블리 파일에는 어셈블리 매니페스트만 포함됩니다.

를 사용하여 DefineResource얻은 각 ResourceWriter 에 대해 이 메서드는 .resources 파일을 작성하고 를 호출 Close 하여 스트림을 닫습니다.

assemblyFileName 드라이브 또는 디렉터리 구성 요소가 없는 간단한 파일 이름이어야 합니다. 특정 디렉터리에 어셈블리를 만들려면 대상 디렉터리 인수를 DefineDynamicAssembly 사용하는 메서드 중 하나를 사용합니다.

.NET Framework 버전 2.0에서 메서드의 Save 이 오버로드는 매개 변수 및 I386 매개 변수에 대해 portableExecutableKind 메서드 오버로드 ILOnly 를 호출 Save(String, PortableExecutableKinds, ImageFileMachine) 하는 imageFileMachine 것과 같습니다.

적용 대상

Save(String, PortableExecutableKinds, ImageFileMachine)

이 동적 어셈블리를 디스크에 저장하고, 어셈블리의 실행 파일 및 대상 플랫폼에 코드의 특성을 지정합니다.

public:
 void Save(System::String ^ assemblyFileName, System::Reflection::PortableExecutableKinds portableExecutableKind, System::Reflection::ImageFileMachine imageFileMachine);
public void Save (string assemblyFileName, System.Reflection.PortableExecutableKinds portableExecutableKind, System.Reflection.ImageFileMachine imageFileMachine);
member this.Save : string * System.Reflection.PortableExecutableKinds * System.Reflection.ImageFileMachine -> unit
Public Sub Save (assemblyFileName As String, portableExecutableKind As PortableExecutableKinds, imageFileMachine As ImageFileMachine)

매개 변수

assemblyFileName
String

어셈블리의 파일 이름입니다.

portableExecutableKind
PortableExecutableKinds

코드의 특성을 지정하는 비교할 PortableExecutableKinds 값의 비트 조합입니다.

imageFileMachine
ImageFileMachine

대상 플랫폼을 지정하는 ImageFileMachine 값 중 하나입니다.

예외

assemblyFileName의 길이가 0입니다.

또는

어셈블리에 동일한 이름의 모듈 리소스 파일이 두 개 이상 있는 경우

또는

어셈블리의 대상 디렉터리가 잘못된 경우

또는

assemblyFileName 이 단순한 파일 이름이 아니거나(예: 디렉터리 또는 드라이브 구성 요소 있음), 이 어셈블리에 둘 이상의 관리되지 않는 리소스(버전 정보 리소스 포함)가 정의되어 있습니다.

또는

CultureInfoAssemblyCultureAttribute 문자열이 유효한 문자열이 아니거나 DefineVersionInfoResource(String, String, String, String, String) 가 이 메서드 호출 전에 호출되었습니다.

assemblyFileName이(가) null인 경우

해당 어셈블리가 이미 저장되어 있는 경우

또는

이 어셈블리에 RunAssemblyBuilderAccess

저장하는 동안 출력 오류가 발생한 경우

어셈블리의 모듈에 있는 형식이 디스크에 기록되도록CreateType() 이 호출되지 않았습니다.

설명

참고

동적 어셈블리를 디스크에 저장하는 것은 .NET Framework 지원됩니다.

portableExecutableKind 가 호환되지 않는 경우 imageFileMachineimageFileMachine 보다 portableExecutableKind우선합니다. 예외는 throw되지 않습니다. 예를 들어 로 를 지정 ImageFileMachine.I386PortableExecutableKinds.PE32PlusPortableExecutableKinds.PE32Plus 하면 이 무시됩니다.

이 메서드는 이 동적 어셈블리에 정의된 모든 일시적이지 않은 동적 모듈을 저장합니다. 일시적인 동적 모듈은 저장되지 않습니다. 어셈블리 파일 이름은 모듈 중 하나의 이름과 같을 수 있습니다. 이 경우 어셈블리 매니페스트는 해당 모듈 내에 저장됩니다. assemblyFileName 는 어셈블리에 포함된 모든 모듈의 이름과 다를 수 있습니다. 이 경우 어셈블리 파일에는 어셈블리 매니페스트만 포함됩니다.

를 사용하여 DefineResource얻은 각 ResourceWriter 에 대해 이 메서드는 .resources 파일을 작성하고 를 호출 Close 하여 스트림을 닫습니다.

assemblyFileName 드라이브 또는 디렉터리 구성 요소가 없는 간단한 파일 이름이어야 합니다. 특정 디렉터리에 어셈블리를 만들려면 대상 디렉터리 인수를 DefineDynamicAssembly 사용하는 메서드 중 하나를 사용합니다.

적용 대상