방법: 리플렉션 전용 컨텍스트에 어셈블리 로드
리플렉션 전용 로드 컨텍스트를 사용하면 다른 플랫폼 또는 다른 버전의 .NET용으로 컴파일된 어셈블리를 검사할 수 있습니다. 이 컨텍스트에 로드된 코드는 검사할 수 있습니다. 실행할 수 없습니다. 즉, 생성자를 실행할 수 없으므로 개체를 만들 수 없습니다. 코드를 실행할 수 없으므로 종속성이 자동으로 로드되지 않습니다. 종속성을 검사하려면 직접 로드해야 합니다.
리플렉션 전용 로드 컨텍스트에 어셈블리를 로드하려면
표시 이름이 지정된 경우 ReflectionOnlyLoad(String) 메서드 오버로드를 사용하여 어셈블리를 로드하고, 해당 경로가 지정된 경우 ReflectionOnlyLoadFrom 메서드를 사용하여 어셈블리를 로드합니다. 어셈블리가 이진 이미지인 경우 ReflectionOnlyLoad(Byte[]) 메서드 오버로드를 사용합니다.
참고 항목
리플렉션 전용 컨텍스트를 사용하여 실행 컨텍스트의 버전이 아닌 .NET Framework 버전에서 mscorlib.dll 버전을 로드할 수 없습니다.
어셈블리에 종속성이 있는 경우 ReflectionOnlyLoad 메서드는 종속성을 로드하지 않습니다. 종속성을 검사하려면 직접 로드해야 합니다.
어셈블리의 ReflectionOnly 속성을 사용하여 어셈블리를 리플렉션 전용 컨텍스트에 로드할지 여부를 확인합니다.
어셈블리 또는 어셈블리의 형식에 특성이 적용된 경우 CustomAttributeData 클래스를 통해 이러한 특성을 검사하여 리플렉션 전용 컨텍스트에서 코드를 실행하지 않도록 합니다. CustomAttributeData.GetCustomAttributes 메서드의 적절한 오버로드를 사용하여 어셈블리, 멤버, 모듈 또는 매개 변수에 적용된 특성을 나타내는 CustomAttributeData 개체를 가져옵니다.
참고 항목
어셈블리에 또는 해당 내용에 적용되는 특성은 어셈블리에서 정의되거나, 리플렉션 전용 컨텍스트에 로드된 다른 어셈블리에서 정의될 수 있습니다. 특성이 정의되어 있는 위치를 미리 확인할 수는 없습니다.
예시
다음 코드 예제에서는 리플렉션 전용 컨텍스트에 로드된 어셈블리에 적용된 특성을 검사하는 방법을 보여 줍니다.
이 코드 예제는 생성자 두 개와 속성 하나를 사용하여 사용자 지정 특성을 정의합니다. 어셈블리, 어셈블리에 선언된 형식, 형식의 메서드, 메서드의 매개 변수에 특성이 적용됩니다. 실행할 경우 어셈블리는 리플렉션 전용 컨텍스트에 자동으로 로드되고 어셈블리와 어셈블리에 포함된 형식 및 멤버에 적용된 사용자 지정 특성에 대한 정보를 표시합니다.
참고 항목
코드 예제를 단순화하기 위해 어셈블리가 자동으로 로드 및 검사됩니다. 일반적으로 실행 컨텍스트와 리플렉션 전용 컨텍스트에 동일한 어셈블리가 로드되는 경우는 없습니다.
using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;
// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
FirstKind, SecondKind, ThirdKind, FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
// Data for properties.
ExampleKind kindValue;
String^ noteValue;
array<String^>^ arrayStrings;
array<int>^ arrayNumbers;
// Constructors.
void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
{
kindValue = initKind;
arrayStrings = initStrings;
}
public:
ExampleAttribute()
{
ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
}
ExampleAttribute( ExampleKind initKind )
{
ExampleAttributeInitialize( initKind, nullptr );
}
ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
{
ExampleAttributeInitialize( initKind, initStrings );
}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
property ExampleKind Kind
{
ExampleKind get()
{
return kindValue;
}
}
property array<String^>^ Strings
{
array<String^>^ get()
{
return arrayStrings;
}
}
property String^ Note
{
String^ get()
{
return noteValue;
}
void set( String^ value )
{
noteValue = value;
}
}
property array<int>^ Numbers
{
array<int>^ get()
{
return arrayNumbers;
}
void set( array<int>^ value )
{
arrayNumbers = value;
}
}
};
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];
// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind,
gcnew array<String^> { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = gcnew array<int> { 53, 57, 59 })]
public ref class Test
{
public:
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
void TestMethod( [Example] Object^ arg ){}
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
static void Main()
{
Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
Type^ t = assembly->GetType( "Test" );
MethodInfo^ m = t->GetMethod( "TestMethod" );
array<ParameterInfo^>^p = m->GetParameters();
Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
}
private:
static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
{
if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
{
Console::WriteLine(" Array of '{0}':", cata->ArgumentType);
for each (CustomAttributeTypedArgument^ cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
{
Console::WriteLine(" Type: '{0}' Value: '{1}'",
cataElement->ArgumentType, cataElement->Value);
}
}
else
{
Console::WriteLine( " Type: '{0}' Value: '{1}'",
cata->ArgumentType, cata->Value );
}
}
static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
{
for each ( CustomAttributeData^ cad in attributes )
{
Console::WriteLine( " {0}", cad );
Console::WriteLine( " Constructor: '{0}'", cad->Constructor );
Console::WriteLine( " Constructor arguments:" );
for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console::WriteLine( " Named arguments:" );
for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
{
Console::WriteLine( " MemberInfo: '{0}'", cana.MemberInfo );
ShowValueOrArray(cana.TypedValue);
}
}
}
};
int main()
{
Test::Main();
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]
// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
FirstKind,
SecondKind,
ThirdKind,
FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
// Data for properties.
private ExampleKind kindValue;
private string noteValue;
private string[] arrayStrings;
private int[] arrayNumbers;
// Constructors. The parameterless constructor (.ctor) calls
// the constructor that specifies ExampleKind and an array of
// strings, and supplies the default values.
//
public ExampleAttribute(ExampleKind initKind, string[] initStrings)
{
kindValue = initKind;
arrayStrings = initStrings;
}
public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
public ExampleKind Kind { get { return kindValue; }}
public string[] Strings { get { return arrayStrings; }}
public string Note
{
get { return noteValue; }
set { noteValue = value; }
}
public int[] Numbers
{
get { return arrayNumbers; }
set { arrayNumbers = value; }
}
}
// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
new string[] { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = new int[] { 53, 57, 59 })]
public class Test
{
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
public void TestMethod([Example] object arg) { }
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
public static void Main()
{
Assembly asm = Assembly.ReflectionOnlyLoad("Source");
Type t = asm.GetType("Test");
MethodInfo m = t.GetMethod("TestMethod");
ParameterInfo[] p = m.GetParameters();
Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
Console.WriteLine("\r\nAttributes for type: '{0}'", t);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
Console.WriteLine("\r\nAttributes for member: '{0}'", m);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
}
private static void ShowAttributeData(
IList<CustomAttributeData> attributes)
{
foreach( CustomAttributeData cad in attributes )
{
Console.WriteLine(" {0}", cad);
Console.WriteLine(" Constructor: '{0}'", cad.Constructor);
Console.WriteLine(" Constructor arguments:");
foreach( CustomAttributeTypedArgument cata
in cad.ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console.WriteLine(" Named arguments:");
foreach( CustomAttributeNamedArgument cana
in cad.NamedArguments )
{
Console.WriteLine(" MemberInfo: '{0}'",
cana.MemberInfo);
ShowValueOrArray(cana.TypedValue);
}
}
}
private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
{
if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
{
Console.WriteLine(" Array of '{0}':", cata.ArgumentType);
foreach (CustomAttributeTypedArgument cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cataElement.ArgumentType, cataElement.Value);
}
}
else
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cata.ArgumentType, cata.Value);
}
}
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel
' The example attribute is applied to the assembly.
<Assembly: Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>
' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
FirstKind
SecondKind
ThirdKind
FourthKind
End Enum
' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
Inherits Attribute
' Data for properties.
Private kindValue As ExampleKind
Private noteValue As String
Private arrayStrings() As String
Private arrayNumbers() As Integer
' Constructors. The parameterless constructor (.ctor) calls
' the constructor that specifies ExampleKind and an array of
' strings, and supplies the default values.
'
Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
kindValue = initKind
arrayStrings = initStrings
End Sub
Public Sub New(ByVal initKind As ExampleKind)
Me.New(initKind, Nothing)
End Sub
Public Sub New()
Me.New(ExampleKind.FirstKind, Nothing)
End Sub
' Properties. The Note and Numbers properties must be read/write, so they
' can be used as named parameters.
'
Public ReadOnly Property Kind As ExampleKind
Get
Return kindValue
End Get
End Property
Public ReadOnly Property Strings As String()
Get
Return arrayStrings
End Get
End Property
Public Property Note As String
Get
Return noteValue
End Get
Set
noteValue = value
End Set
End Property
Public Property Numbers As Integer()
Get
Return arrayNumbers
End Get
Set
arrayNumbers = value
End Set
End Property
End Class
' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
New String() {"String array argument, line 1", _
"String array argument, line 2", _
"String array argument, line 3"}, _
Note:="This is a note on the class.", _
Numbers:=New Integer() {53, 57, 59})> _
Public Class Test
' The example attribute is applied to a method, using the
' parameterless constructor and supplying a named argument.
' The attribute is also applied to the method parameter.
'
<Example(Note:="This is a note on a method.")> _
Public Sub TestMethod(<Example()> ByVal arg As Object)
End Sub
' Sub Main gets objects representing the assembly, the test
' type, the test method, and the method parameter. Custom
' attribute data is displayed for each of these.
'
Public Shared Sub Main()
Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
Dim t As Type = asm.GetType("Test")
Dim m As MethodInfo = t.GetMethod("TestMethod")
Dim p() As ParameterInfo = m.GetParameters()
Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
End Sub
Private Shared Sub ShowAttributeData( _
ByVal attributes As IList(Of CustomAttributeData))
For Each cad As CustomAttributeData _
In CType(attributes, IEnumerable(Of CustomAttributeData))
Console.WriteLine(" {0}", cad)
Console.WriteLine(" Constructor: '{0}'", cad.Constructor)
Console.WriteLine(" Constructor arguments:")
For Each cata As CustomAttributeTypedArgument _
In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))
ShowValueOrArray(cata)
Next
Console.WriteLine(" Named arguments:")
For Each cana As CustomAttributeNamedArgument _
In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))
Console.WriteLine(" MemberInfo: '{0}'", _
cana.MemberInfo)
ShowValueOrArray(cana.TypedValue)
Next
Next
End Sub
Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
Console.WriteLine(" Array of '{0}':", cata.ArgumentType)
For Each cataElement As CustomAttributeTypedArgument In cata.Value
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cataElement.ArgumentType, cataElement.Value)
Next
Else
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cata.ArgumentType, cata.Value)
End If
End Sub
End Class
' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
' [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
' Constructor: 'Void .ctor(Int32)'
' Constructor arguments:
' Type: 'System.Int32' Value: '8'
' Named arguments:
' [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'Boolean WrapNonExceptionThrows'
' Type: 'System.Boolean' Value: 'True'
' [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
' Constructor: 'Void .ctor(ExampleKind)'
' Constructor arguments:
' Type: 'ExampleKind' Value: '2'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
' [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
' Constructor: 'Void .ctor(ExampleKind, System.String[])'
' Constructor arguments:
' Type: 'ExampleKind' Value: '1'
' Array of 'System.String[]':
' Type: 'System.String' Value: 'String array argument, line 1'
' Type: 'System.String' Value: 'String array argument, line 2'
' Type: 'System.String' Value: 'String array argument, line 3'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the class.'
' MemberInfo: 'Int32[] Numbers'
' Array of 'System.Int32[]':
' Type: 'System.Int32' Value: '53'
' Type: 'System.Int32' Value: '57'
' Type: 'System.Int32' Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
' [ExampleAttribute(Note = "This is a note on a method.")]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
' [ExampleAttribute()]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
참고 항목
.NET