Update-AzReservation
Updates the applied scopes of the Reservation.
Syntax
Update-AzReservation
-Id <String>
-OrderId <String>
[-AppliedScope <String[]>]
[-AppliedScopePropertyDisplayName <String>]
[-AppliedScopePropertyManagementGroupId <String>]
[-AppliedScopePropertyResourceGroupId <String>]
[-AppliedScopePropertySubscriptionId <String>]
[-AppliedScopePropertyTenantId <String>]
[-AppliedScopeType <AppliedScopeType>]
[-InstanceFlexibility <InstanceFlexibility>]
[-Name <String>]
[-Renew]
[-RenewProperty <IPatchPropertiesRenewProperties>]
[-ReviewDateTime <DateTime>]
[-DefaultProfile <PSObject>]
[-AsJob]
[-NoWait]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Update-AzReservation
-Id <String>
-OrderId <String>
-Reservation <IPatch>
[-DefaultProfile <PSObject>]
[-AsJob]
[-NoWait]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Update-AzReservation
-InputObject <IReservationsIdentity>
[-AppliedScope <String[]>]
[-AppliedScopePropertyDisplayName <String>]
[-AppliedScopePropertyManagementGroupId <String>]
[-AppliedScopePropertyResourceGroupId <String>]
[-AppliedScopePropertySubscriptionId <String>]
[-AppliedScopePropertyTenantId <String>]
[-AppliedScopeType <AppliedScopeType>]
[-InstanceFlexibility <InstanceFlexibility>]
[-Name <String>]
[-Renew]
[-RenewProperty <IPatchPropertiesRenewProperties>]
[-ReviewDateTime <DateTime>]
[-DefaultProfile <PSObject>]
[-AsJob]
[-NoWait]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Update-AzReservation
-InputObject <IReservationsIdentity>
-Reservation <IPatch>
[-DefaultProfile <PSObject>]
[-AsJob]
[-NoWait]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Updates the applied scopes of the Reservation.
Examples
Example 1: Update Reservation's properties
Update-AzReservation -ReservationOrderId "30000000-aaaa-bbbb-cccc-200000000013" -ReservationId "10000000-aaaa-bbbb-cccc-200000000007" -Name "testName"
Location ReservationOrderId/ReservationId Sku State BenefitStartTime ExpiryDate LastUpdatedDateTime SkuDescription
-------- -------------------------------- --- ----- ---------------- ---------- ------------------- --------------
westeurope 30000000-aaaa-bbbb-cccc-200000000013/10000000-aaaa-bbbb-cccc-200000000007/16 Standard_B4ms Succeeded 6/14/2022 9:41:17 PM 6/14/2025 12:00:00 AM 7/7/2022 11:37:58 PM Reserved VM In…Update Reservation's properties including name, renew, appliedScopeType, appliedScope
Example 2: Update Reservation's AppliedScopeType
# Shared scope:
Update-AzReservation -ReservationOrderId "30000000-aaaa-bbbb-cccc-200000000013" -ReservationId "10000000-aaaa-bbbb-cccc-200000000007" -AppliedScopeType "Shared"
# Single scope:
Update-AzReservation -ReservationOrderId "30000000-aaaa-bbbb-cccc-200000000013" -ReservationId "10000000-aaaa-bbbb-cccc-200000000007" -AppliedScopeType "Single" -AppliedScope "/subscriptions/30000000-aaaa-bbbb-cccc-200000000018"
# Single scope with resource group:
Update-AzReservation -ReservationOrderId "30000000-aaaa-bbbb-cccc-200000000013" -ReservationId "10000000-aaaa-bbbb-cccc-200000000007" -AppliedScopeType "Single" -AppliedScope "/subscriptions/30000000-aaaa-bbbb-cccc-200000000018/resourcegroups/{your resource group name}"
Similar to example 1Update Reservation's applied scope type. For Shared scope, don't pass in any applied scope id. For Single scope, pass in applied scope id and for Single scope with resource group, also pass in resource group name in the applied scope id
Parameters
-AppliedScope
List of the subscriptions that the benefit will be applied. Do not specify if AppliedScopeType is Shared. This property will be deprecated and replaced by appliedScopeProperties instead for Single AppliedScopeType.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AppliedScopePropertyDisplayName
Display name
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AppliedScopePropertyManagementGroupId
Fully-qualified identifier of the management group where the benefit must be applied.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AppliedScopePropertyResourceGroupId
Fully-qualified identifier of the resource group.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AppliedScopePropertySubscriptionId
Fully-qualified identifier of the subscription.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AppliedScopePropertyTenantId
Tenant ID where the savings plan should apply benefit.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AppliedScopeType
Type of the Applied Scope.
| Type: | AppliedScopeType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AsJob
Run the command as a job
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DefaultProfile
The DefaultProfile parameter is not functional. Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
| Type: | PSObject |
| Aliases: | AzureRMContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Id
Id of the reservation item
| Type: | String |
| Aliases: | ReservationId |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Identity Parameter To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
| Type: | IReservationsIdentity |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InstanceFlexibility
Turning this on will apply the reservation discount to other VMs in the same VM size group. Only specify for VirtualMachines reserved resource type.
| Type: | InstanceFlexibility |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
Display name of the reservation
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NoWait
Run the command asynchronously
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OrderId
Order Id of the reservation
| Type: | String |
| Aliases: | ReservationOrderId |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Renew
Setting this to true will automatically purchase a new reservation on the expiration date time.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RenewProperty
. To construct, see NOTES section for RENEWPROPERTY properties and create a hash table.
| Type: | IPatchPropertiesRenewProperties |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Reservation
The request for reservation patch To construct, see NOTES section for RESERVATION properties and create a hash table.
| Type: | IPatch |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ReviewDateTime
This is the date-time when the Azure hybrid benefit needs to be reviewed.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
Outputs
Azure PowerShell