Optimize-WindowsImage

Reference

Module:: DISM

Configures a Windows image with specified optimizations.

Syntax

Optimize-WindowsImage
        -OptimizationTarget <String>
        -Path <String>
        [-WindowsDirectory <String>]
        [-SystemDrive <String>]
        [-LogPath <String>]
        [-ScratchDirectory <String>]
        [-LogLevel <LogLevel>]
        [<CommonParameters>]

Description

The Optimize-WindowsImage cmdlet performs specified configurations to an offline image.

Optimize-WindowsImage only applies to Windows 8.1 Update images that have been captured or exported as a Windows image file boot (WIMBoot) file. Only use Optimize-WindowsImage with images that will be used for WIMBoot supported systems. If Optimize-WindowsImage is used with a non-WIMBoot supported system image, Windows may not work as expected, after installation on a non-WIMBoot supported device.

Examples

Example 1: Configure an image as a WIMBoot system

PS C:\> Optimize-WindowsImage -Path "c:\" -OptimizationTarget "WIMBoot"

This command configures the Windows image located in the c:\ directory as a WIMBoot system.

Parameters

-LogLevel

Specifies the maximum output level shown in the logs. The default log level is 3. The accepted values are as follows:

1 = Errors only
2 = Errors and warnings
3 = Errors, warnings, and information
4 = All of the information listed previously, plus debug output

Type:	LogLevel
Aliases:	LL
Accepted values:	Errors, Warnings, WarningsInfo
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-LogPath

Specifies the full path and file name to log to. If not set, the default is %WINDIR%\Logs\Dism\dism.log. In Windows PE, the default directory is the RAMDISK scratch space which can be as low as 32 MB. The log file will automatically be archived. The archived log file will be saved with .bak appended to the file name and a new log file will be generated. Each time the log file is archived the .bak file will be overwritten. When using a network share that is not joined to a domain, use the net use command together with domain credentials to set access permissions before you set the log path for the DISM log.

Type:	String
Aliases:	LP
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-OptimizationTarget

Specifies the Windows image optimization type. The accepted values are as follows: "WIMBoot". Note: This value must be entered as a string value.

Type:	String
Accepted values:	WIMBoot
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-Path

Specifies the full path to the root directory of the offline Windows image that you will service. If the directory named Windows is not a subdirectory of the root directory, WindowsDirectory must be specified.

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-ScratchDirectory

Specifies a temporary directory that will be used when extracting files for use during servicing. The directory must exist locally. If not specified, the \Windows\%Temp% directory will be used, with a subdirectory name of a randomly generated hexadecimal value for each run of DISM. Items in the scratch directory are deleted after each operation. You should not use a network share location as a scratch directory to expand a package (.cab or .msu file) for installation. The directory used for extracting files for temporary usage during servicing should be a local directory.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-SystemDrive

Specifies the path to the location of the BootMgr files. This is necessary only when the BootMgr files are located on a partition other than the one that you are running the command from. Use -SystemDrive to service an installed Windows image from a Windows PE environment.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-WindowsDirectory

Specifies the path to the Windows directory relative to the image path. This cannot be the full path to the Windows directory; it should be a relative path. If not specified, the default is the Windows directory in the root of the offline image directory.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

Inputs

Microsoft.Dism.Commands.ImageObject

Outputs