편집

다음을 통해 공유


Set-NetFirewallHyperVRule

Modifies existing Hyper-V firewall rules.

Syntax

Set-NetFirewallHyperVRule
   [-Name] <string[]>
   [-NewDisplayName <string>]
   [-RulePriority <uint16>]
   [-Direction {Inbound | Outbound}]
   [-VMCreatorId <string>]
   [-Protocol <string>]
   [-LocalAddresses <string[]>]
   [-LocalPorts <string[]>]
   [-RemoteAddresses <string[]>]
   [-RemotePorts <string[]>]
   [-Action {NotConfigured | Allow | Block}]
   [-Enabled {True | False}]
   [-Profiles {Any | Domain | Private | Public | NotApplicable}]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <int>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm] 
   [<CommonParameters>]
Set-NetFirewallHyperVRule
   -DisplayName <string[]>
   [-NewDisplayName <string>]
   [-RulePriority <uint16>]
   [-Direction {Inbound | Outbound}]
   [-VMCreatorId <string>]
   [-Protocol <string>]
   [-LocalAddresses <string[]>]
   [-LocalPorts <string[]>]
   [-RemoteAddresses <string[]>]
   [-RemotePorts <string[]>]
   [-Action {NotConfigured | Allow | Block}]
   [-Enabled {True | False}]
   [-Profiles {Any | Domain | Private | Public | NotApplicable}]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <int>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-NetFirewallHyperVRule
   -InputObject <CimInstance#MSFT_NetFirewallHyperVRule[]>
   [-NewDisplayName <string>]
   [-RulePriority <uint16>]
   [-Direction {Inbound | Outbound}]
   [-VMCreatorId <string>]
   [-Protocol <string>]
   [-LocalAddresses <string[]>]
   [-LocalPorts <string[]>]
   [-RemoteAddresses <string[]>]
   [-RemotePorts <string[]>]
   [-Action {NotConfigured | Allow | Block}]
   [-Enabled {True | False}]
   [-Profiles {Any | Domain | Private | Public | NotApplicable}]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <int>]
   [-AsJob]
   [-PassThru]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-NetFirewallHyperVRule cmdlet modifies existing Hyper-V firewall rule properties. This cmdlet gets one or more rules to be modified using the Name parameter or the DisplayName parameter.

Rules cannot be queried by property in this cmdlet, but the querying can be done by the Get-NetFirewallHyperVRule cmdlet and piped into this cmdlet. The remaining parameters modify the properties of the specified rules.

Examples

EXAMPLE 1

PS C:\> Set-NetFirewallHyperVRule -Name DisplayName "Block Outbound to My Servers" -RemoteAddresses "10.0.0.0/32"

This example modifies the existing Hyper-V firewall rules with DisplayName "Block Outbound to My Servers" and updates the RemoteAddresses condition.

Parameters

-Action

Updates the Action value for the matching Hyper-V firewall rules. This parameter specifies the action to take on traffic that matches this rule. The acceptable values for this parameter are: Allow or Block.

  • Allow: Network packets that match all criteria specified in this rule are permitted through the firewall. This is the default value.
  • Block: Network packets that match all criteria specified in this rule are dropped by the firewall.
Type:Action
Accepted values:NotConfigured, Allow, Block
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Direction

Updates the Direction value for the matching Hyper-V firewall rules. This parameter specifies which direction of traffic to match with this rule. The acceptable values for this parameter are: Inbound or Outbound.

Type:Direction
Accepted values:Inbound, Outbound
Position:Named
Default value:Inbound
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DisplayName

Specifies that only matching Hyper-V firewall rules of the indicated display name are updated.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-Enabled

Updates the Enabled value of the matching Hyper-V firewall rules. This parameter specifies that the rule object is administratively enabled or administratively disabled. The acceptable values for this parameter are:

  • True: Specifies the rule is currently enabled.
  • False: Specifies the rule is currently disabled.

Note that the type of this parameter is not Boolean, therefore $true and $false variables are not acceptable values here. Use "True" and "False" text strings instead.

A disabled rule will not actively modify computer behavior, but the management construct still exists on the computer so it can be re-enabled.

Type:Enabled
Accepted values:True, False
Position:Named
Default value:True
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-LocalAddresses

Updates the LocalAddresses value for the matching Hyper-V firewall rules. This parameter specifies that network packets with matching IP addresses match this rule. This parameter value is an IPv4 or IPv6 address, hostname, subnet, or range. The acceptable formats for this parameter are:

  • Single IPv4 Address: 1.2.3.4
  • Single IPv6 Address: fe80::1
  • IPv4 Subnet (by network bit count): 1.2.3.4/24
  • IPv6 Subnet (by network bit count): fe80::1/48
  • IPv4 Subnet (by network mask): 1.2.3.4/255.255.255.0
  • IPv4 Range: 1.2.3.4-1.2.3.7
  • IPv6 Range: fe80::1-fe80::9
Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-LocalPorts

Updates the LocalPorts value for the matching Hyper-V firewall rules.

This parameter specifies that network packets with matching IP local port numbers match this rule. The acceptable values are:

  • Port range: 0-65535
  • Port number: 80
Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Name

Specifies that only matching Hyper-V firewall rules of the indicated name are updated.

Type:String
Aliases:ID
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-NewDisplayName

Updates the DisplayName of the matching Hyper-V firewall rules.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Profiles

Specifies one or more profiles to which the hyper-v firewall rule is assigned. The rule is active on the local computer only when the specified profile is currently active. This relationship is many-to-many and can be indirectly modified by the user, by changing the Profiles field on instances of rules. Only one profile is applied at a time. The acceptable values for this parameter are: Any, Domain, Private, Public, or NotApplicable. The default value is Any. Separate multiple entries with a comma and do not include any spaces.

Type:Profiles
Accepted values:Any, Domain, Private, Public, NotApplicable
Position:Named
Default value:Any
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Protocol

Updates the protocol value of the matching Hyper-V firewall rules.

This parameter specifies that network packets with matching IP protocol match this rule. The acceptable values for this parameter are:

  • Protocols by number: 0-255.
  • Protocols by name: TCP, UDP, ICMPv4, or ICMPv6.
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoteAddresses

Updates the RemoteAddresses value of the matching Hyper-V firewall rules. This parameter specifies that network packets with matching IP addresses match this rule. This parameter value is an IPv4 or IPv6 address, subnet, or range. The acceptable formats for this parameter are:

  • Single IPv4 Address: 1.2.3.4
  • Single IPv6 Address: fe80::1
  • IPv4 Subnet (by network bit count): 1.2.3.4/24
  • IPv6 Subnet (by network bit count): fe80::1/48
  • IPv4 Subnet (by network mask): 1.2.3.4/255.255.255.0
  • IPv4 Range: 1.2.3.4-1.2.3.7
  • IPv6 Range: fe80::1-fe80::9
Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemotePorts

Updates the RemotePorts value of the matching Hyper-V firewall rules. This parameter specifies that network packets with matching IP port numbers match this rule. The acceptable values are:

  • Port range: 0-65535
  • Port number: 80
Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RulePriority

Updates the RulePriority value of the matching Hyper-V firewall rules. This parameter specifies the order in which rules are evaluated. A lower priority rule is evaluated before a higher priority rule.

Type:uint16
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.

The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-VMCreatorId

Updates the VMCreatorId value of the matching Hyper-V firewall rules. This parameter specifies that network packets originating from a VM matching this VMCreatorId matches this rule. The format for this value is a GUID enclosed in brackets: '{9E288F02-CE00-4D9E-BE2B-14CE463B0298}'.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

None

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.