Set-CsOnlineDialInConferencingUser

Module:

MicrosoftTeamsPowerShell

Applies to:

Microsoft Teams

Note

The AllowPSTNOnlyMeetings, ResetConferenceId, and ConferenceId parameters will be deprecated on Jan 31, 2022. To allow Teams meeting participants joining via the PSTN to bypass the lobby, use the AllowPSTNUsersToBypassLobby of the Set-CsTeamsMeetingPolicy cmdlet. The capabilities associated with the ResetConferenceId and ConferenceId parameters are no longer supported.

Use the Set-CsOnlineDialInConferencingUser cmdlet to modify the properties of a user that has been enabled for Microsoft's audio conferencing service.

Syntax

Set-CsOnlineDialInConferencingUser
   [-Identity] <UserIdParameter>
   [-BridgeId <Guid>]
   [-BridgeName <String>]
   [-Tenant <Guid>]
   [-ServiceNumber <String>]
   [-TollFreeServiceNumber <String>]
   [-AllowPSTNOnlyMeetings <Boolean>]
   [-Force]
   [-ResetLeaderPin]
   [-AllowTollFreeDialIn <Boolean>]
   [-SendEmailToAddress <String>]
   [-SendEmailFromAddress <String>]
   [-SendEmailFromDisplayName <String>]
   [-SendEmail]
   [-DomainController <Fqdn>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-CsOnlineDialInConferencingUser
   [-Identity] <UserIdParameter>
   [-BridgeId <Guid>]
   [-BridgeName <String>]
   [-TenantDomain <String>]
   [-ServiceNumber <String>]
   [-TollFreeServiceNumber <String>]
   [-AllowPSTNOnlyMeetings <Boolean>]
   [-Force]
   [-ResetLeaderPin]
   [-AllowTollFreeDialIn <Boolean>]
   [-SendEmailToAddress <String>]
   [-SendEmailFromAddress <String>]
   [-SendEmailFromDisplayName <String>]
   [-SendEmail]
   [-DomainController <Fqdn>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-CsOnlineDialInConferencingUser cmdlet is used to modify properties for a Microsoft audio conferencing user. This cmdlet will not work for users with third-party conferencing providers. The cmdlet will verify that the correct license is assigned to the user.

Examples

-------------------------- Example 1 --------------------------

Set-CsOnlineDialInConferencingUser -Identity "Ken Meyers" -ResetLeaderPin -ServiceNumber 14255037265

This example shows how to reset the meeting leader's PIN and set the audio conferencing provider default meeting phone number.

-------------------------- Example 2 --------------------------

Set-CsOnlineDialInConferencingUser -Identity "Ken Meyers" -BridgeName "Conference Bridge"

This example sets a user's conference bridge assignment.

Parameters

-AllowPSTNOnlyMeetings

If true, non-authenticated users can start meetings. If false, non-authenticated callers wait in the lobby until an authenticated user joins, thereby starting the meeting. An authenticated user is a user who joins the meeting using a Skype for Business client, or the organizer that joined the meeting via dial-in conferencing and was authenticated by a PIN number. The default is false.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-AllowTollFreeDialIn

If toll-free numbers are available in your Microsoft Audio Conferencing bridge, this parameter controls if they can be used to join the meetings of a given user. This setting can ONLY be managed using the TeamsAudioConferencingPolicy. By default, AllowTollFreeDialin is always set to True.

Type:	Boolean
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-BridgeId

Specifies the globally-unique identifier (GUID) for the audio conferencing bridge.

Type:	Guid
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-BridgeName

Specifies the name of the audio conferencing bridge.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-Confirm

The Confirm switch causes the command to pause processing and requires confirmation to proceed.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-DomainController

Specifies the domain controller that's used by the cmdlet to read or write the specified data. Valid inputs for this parameter include:

Fully qualified domain name (FQDN): -DomainController atl-cs-001.Contoso.com

Computer name: -DomainController atl-cs-001

This parameter is reserved for internal Microsoft use.

Type:	Fqdn
Aliases:	DC
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-Force

The Force switch specifies whether to suppress warning and confirmation messages. It can be useful in scripting to suppress interactive prompts. If the Force switch isn't provided in the command, you're prompted for administrative input if required.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-Identity

Specifies the Identity of the user account to be to be modified. A user identity can be specified by using one of four formats: 1) the user's SIP address; 2) the user's user principal name (UPN); 3) the user's domain name and logon name, in the form domain\logon (for example, litwareinc\kenmyer) and 4) the user's Active Directory display name (for example, Ken Myer). You can also reference a user account by using the user's Active Directory distinguished name.

Type:	UserIdParameter
Position:	1
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-ResetLeaderPin

Specifies whether to reset the meeting organizer or leaders PIN for meetings.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-SendEmail

Send an email to the user containing their Audio Conference information.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-SendEmailFromAddress

You can specify the From Address to send the email that contains the Audio Conference information. This parameter must be used together with -SendEmailFromDisplayName and -SendEmail.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-SendEmailFromDisplayName

You can specify the Display Name to send the email that contains the Audio Conference information. This parameter must be used together with -SendEmailFromAddress and -SendEmail.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-SendEmailToAddress

You can specify the To Address to send the email that contains the Audio Conference information. This parameter must be used together with -SendEmail.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-ServiceNumber

Specifies the default service number for the user. The default number is used in meeting invitations. The cmdlet will verify that the service number is assigned to the user's current conference bridge, or the one the user is being assigned to.

The service number can be specified in the following formats: E.164 number, +<E.164 number> and \<E.164 number>.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-Tenant

Specifies the globally unique identifier (GUID) of your Skype for Business Online tenant account. For example: -Tenant "38aad667-af54-4397-aaa7-e94c79ec2308". You can find your tenant ID by running this command: Get-CsTenant | Select-Object DisplayName, TenantID

This parameter is reserved for internal Microsoft use.

Type:	Guid
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-TenantDomain

Specifies the domain name for the tenant or organization.

This parameter is reserved for internal Microsoft use.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-TollFreeServiceNumber

Specifies a toll-free phone number to be used by the user. This number is then used in meeting invitations. The toll-free number can be specified in the following formats: E.164 number, +<E.164 number> and \<E.164 number>.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

-WhatIf

The WhatIf parameter is not implemented for this cmdlet.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False
Applies to:	Microsoft Teams

Related Links

• Get-CsTeamsAudioConferencingPolicy
• New-CsTeamsAudioConferencingPolicy