편집

다음을 통해 공유


Remove-CsOnlineLisWirelessAccessPoint

Removes a Location Information Server (LIS) wireless access point (WAP).

Syntax

Remove-CsOnlineLisWirelessAccessPoint
      [-BSSID] <string>
      [-Force]
      [-IsDebug <bool>]
      [-NCSApiUrl <string>]
      [-TargetStore <string>]
      [-WhatIf]
      [-Confirm]
      [<CommonParameters>]

Description

Enhanced 9-1-1 allows an emergency operator to identify the location of a caller without having to ask the caller for that information. In the case where a caller is calling from a Voice over Internet Protocol (VoIP) connection, that information must be extracted based on various connection factors. The VoIP administrator must configure a location map (called a wiremap) that will determine a caller's location. This cmdlet removes a WAP from the location configuration database. Removing the WAP will not remove the location associated with that WAP. Use the `Remove-CsLisOnlineLocation` cmdlet to remove a location.

The BSSID (Basic Service Set Identifiers) is used to describe sections of a wireless local area network. It is the MAC of the 802.11 side of the access point. The BSSID parameter in this command also supports the wildcard format to cover all BSSIDs in a range which are sharing the same description and Location ID. The wildcard '*' can be on either the last one or two character(s).

If a BSSID with wildcard format is already exists, the request for removing a single BSSID which is within this wildcard range and with the same location ID will not be accepted.

Examples

Example 1

Remove-CsOnlineLisWirelessAccessPoint -BSSID F0-6E-0B-C2-03-23

Example 1 removes the Location Information Server (LIS) wireless access point with BSS ID "F0-6E-0B-C2-03-23".

Example 2

Remove-CsOnlineLisWirelessAccessPoint -BSSID F0-6E-0B-C2-04-*

Example 2 removes the Location Information Server (LIS) wireless access point with BSS ID "F0-6E-0B-C2-04-*".

Parameters

-BSSID

The Basic Service Set Identifier (BSSID) of the wireless access point. This value must be in the form nn-nn-nn-nn-nn-nn, such as 12-34-56-78-90-ab. It can be presented in wildcard format. The wildcard '*' can be on either the last one or two character(s).

Type:String
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Microsoft Teams

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-Force

The Force switch specifies whether to suppress warning and confirmation messages. It can be useful in scripting to suppress interactive prompts. If the Force switch isn't provided in the command, you're prompted for administrative input if required.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-IsDebug

This parameter is reserved for internal Microsoft use.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-NCSApiUrl

This parameter is reserved for internal Microsoft use.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-TargetStore

This parameter is reserved for internal Microsoft use.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Microsoft Teams

Inputs

System.String

Outputs

System.Object