다음을 통해 공유


Configure web publishing rules for a single internal pool in Lync Server 2013

 

Topic Last Modified: 2014-07-07

Microsoft Forefront Threat Management Gateway 2010 and Internet Information Server Application Request Routing (IIS ARR) uses web publishing rules to publish internal resources, such as a meeting URL, to users on the Internet.

In addition to the Web Services URLs for the virtual directories, you must also create publishing rules for simple URLs, the LyncDiscover URL, and the Office Web Apps Server. For each simple URL, you must create an individual rule on the reverse proxy that points to that simple URL.

If you are deploying mobility and using automatic discovery, you need to create a publishing rule for the external Autodiscover Service URL. Automatic discovery also requires publishing rules for the external Lync Server Web Services URL for your Director pool and Front End pool. For details about creating the web publishing rules for automatic discovery, see Configuring the reverse proxy for mobility in Lync Server 2013.

Use the following procedures to create web publishing rules.

Note

These procedures assume that you have installed the Standard Edition of Forefront Threat Management Gateway (TMG) 2010 or have installed and configured Internet Information Server with the Application request Routing (IIS ARR) extension. You use either TMG or IIS ARR.

To create a web server publishing rule on the computer running TMG 2010

  1. Click Start, select Programs, select Microsoft Forefront TMG, and then click Forefront TMG Management.

  2. In the left pane, expand ServerName, right-click Firewall Policy, select New, and then click Web Site Publishing Rule.

  3. On the Welcome to the New Web Publishing Rule page, type a display name for the publishing rule (for example, LyncServerWebDownloadsRule).

  4. On the Select Rule Action page, select Allow.

  5. On the Publishing Type page, select Publish a single Web site or load balancer.

  6. On the Server Connection Security page, select Use SSL to connect to the published Web server or server farm.

  7. On the Internal Publishing Details page, type the fully qualified domain name (FQDN) of the internal web farm that hosts your meeting content and Address Book content in the Internal Site name box.

    Note

    If your internal server is a Standard Edition server, this FQDN is the Standard Edition server FQDN. If your internal server is a Front End pool, this FQDN is a hardware load balancer virtual IP (VIP) that load balances the internal web farm servers. The TMG server must be able to resolve the FQDN to the IP address of the internal web server. If the TMG server is not able to resolve the FQDN to the proper IP address, you can select Use a computer name or IP address to connect to the published server, and then in the Computer name or IP address box, type the IP address of the internal web server. If you do this, you must ensure that port 53 is open on the TMG server and that it can reach a DNS server that resides in the perimeter network. You can also use entries in the local hosts file to provide name resolution.

  8. On the Internal Publishing Details page, in the Path (optional) box, type /* as the path of the folder to be published.

    Note

    In the website publishing wizard you can only specify one path. Additional paths can be added by modifying the properties of the rule.

  9. On the Public Name Details page, confirm that This domain name is selected under Accept Requests for, type the external Web Services FQDN, in the Public Name box.

  10. On Select Web Listener page, click New to open the New Web Listener Definition Wizard.

  11. On the Welcome to the New Web Listener Wizard page, type a name for the web listener in the Web listener name box (for example, LyncServerWebServers).

  12. On the Client Connection Security page, select Require SSL secured connections with clients.

  13. On the Web Listener IP Address page, select External, and then click Select IP Addresses.

  14. On the External Listener IP selection page, select Specified IP address on the Forefront TMG computer in the selected network, select the appropriate IP address, click Add.

  15. On the Listener SSL Certificates page, select Assign a certificate for each IP address, select the IP address that is associated with the external web FQDN, and then click Select Certificate.

  16. On the Select Certificate page, select the certificate that matches the public names specified in step 9, click Select.

  17. On the Authentication Setting page, select No Authentication.

  18. On the Single Sign On Setting page, click Next.

  19. On the Completing the Web Listener Wizard page, verify that the Web listener settings are correct, and then click Finish.

  20. On the Authentication Delegation page, select No delegation, but client may authenticate directly.

  21. On the User Set page, click Next.

  22. On the Completing the New Web Publishing Rule Wizard page, verify that the web publishing rule settings are correct, and then click Finish.

  23. Click Apply in the details pane to save the changes and update the configuration.

To create a web server publishing rule on the computer running IIS ARR

  1. Bind the certificate that you will use for the reverse proxy to the HTTPS protocol. Click Start, select Programs, select Administrative Tools, and then click Internet Information Services (IIS) Manager.

    Note

    Additional help, screen shots and guidance on deploying and configuring IIS ARR can be found in the NextHop article Using IIS ARR as a Reverse Proxy for Lync Server 2013.

  2. If you have not already done so, import the certificate that you will use for the reverse proxy. In Internet Information Services (IIS) Manager, click the reverse proxy server name on the left-hand size of the console. In the middle of the console under IIS locate Server Certificates. Right-click Server Certificates and select Open feature.

  3. On the right hand side of the console, click Import…. Type the path and filename of the certificate with the extension, or click to browse for the certificate. Select the certificate and click Open. Supply the password used to protect the private key (if you assigned a password when exporting the certificate and private key). Click OK. If the certificate import was successful, the certificate will appear as an entry in the middle of the console as an entry in Server Certificates.

  4. Assign the certificate for use by HTTPS. On the left-hand side of the console, select the Default Web Site of the IIS server. On the right-hand side, click Bindings…. In the Site Bindings dialog, click Add…. On the Add Site Binding dialog under Type:, select https. Selecting https will allow you to select the certificate to use for https. Under SSL certificate:, select the certificate that you imported for the reverse proxy. Click OK. Then, click Close. The certificate is now bound to the reverse proxy for secure socket layer (SSL) and transport layer security (TLS).

    Important

    If you receive a warning when closing the Bindings dialogs that intermediate certificates are missing, you need to locate and import the public CA root authority certificate and any intermediate CA certificates. Consult the instructions at the public CA that you requested your certificate from and follow the instructions to request and import a certificate chain. If you exported the certificate from your Edge Server, you can export the root CA certificate and any intermediate CA certificates associated with the Edge Server. Import the root CA certificate into the Computer’s (not to be confused with the User store) Trusted Root Certification Authorities store and intermediate certificates into the Computer’s Intermediate Certification Authorities store.

  5. On the left-hand side of the console below the IIS server name, right-click Server Farms then click Create Server Farm….

    Note

    If you do not see the Server Farms node, you need to install Application Request Routing. For details, see Setting up reverse proxy servers for Lync Server 2013.

    On the Create Server Farm dialog in Server farm name, type the a name (this can be a friendly name for identification purposes) for the first URL. Click Next.

  6. On the Add Server dialog in Server Address, type the fully qualified domain name (FQDN) of the external web services on your Front End Server. The names that will be used here for example purposes are the same that are used in the Planning section for the reverse proxy, Certificate summary - Reverse proxy in Lync Server 2013. Referring to the reverse proxy planning, we type the FQDN webext.contoso.com. Confirm that the checkbox next to Online is selected. Click Add to add the server to the pool of web servers for this configuration.

    Warning

    Lync Server uses hardware load balancers to pool Director and Front End Servers for HTTP and HTTPS traffic. You will only supply one FQDN when adding a server to the IIS ARR Server Farm. The FQDN will be the Front End Server or Director in non-pooled server configurations, or the FQDN of the configured hardware load balancer for server pools. The only supported method to load balance HTTP and HTTPS traffic is by using hardware load balancers.

  7. On the Add Server dialog, click Advanced settings…. This opens a dialog to define application request routing for requests to the configured FQDN. The purpose is to redefine what port is used when the request is processed by IIS ARR.

    By default, the destination HTTP port must be defined as 8080. Click next to the current httpPort 80 and set the value to 8080. Click next to the current httpsPort 443 and set the value to 4443. Leave the weight parameter at 100. If needed, you can redefine weights for a given rule once you have baseline statistics. Click Finish to complete this part of the rule configuration.

  8. You may see a dialog Rewrite Rules that informs you that IIS Manager can create a URL rewrite rule to route all incoming requests to the server farm automatically. Click Yes. You will adjust the rules manually, but selecting Yes sets the initial configuration..

  9. Click the name of the server farm that you have just created. Under Server Farm in IIS Manager Features View, you double-click Caching. Deselect Enable disk cache. Click Apply on the right-hand side.

  10. Click the name of the server farm. Under Server Farm in IIS Manager Features View, you double-click Proxy. On the Proxy settings page change the value for Time-out (seconds) to a value appropriate for your deployment. Click Apply to save the change.

    Important

    The Proxy Time-out value is a number that will vary from deployment to deployment. You should monitor your deployment and modify the value for the best experience for clients. You may be able to set the value as low as 200. If you are supporting Lync mobile clients in your environment, you should set the value to 960 to allow for push notifications timeout from Office 365 which have a time-out value of 900. It is very likely that you will need to increase the time-out value to avoid client disconnects when the value is too low or decrease the number if connections through the proxy do not disconnect and clear long after the client has disconnected. Monitoring and base-lining what is normal for your environment is the only accurate means to determine where the right setting is for this value.

  11. Click the name of the server farm. Under Server Farm in IIS Manager Features View, you double-click Routing Rules. On the Routing Rules dialog under Routing, clear the checkbox next to Enable SSL offloading. If the ability to clear the checkbox is not available, select the checkbox for Use URL Rewrite to inspect incoming requests. Click Apply to save your changes.

    Warning

    SSL Offloading by the reverse proxy is not supported.

  12. Repeat Steps 5-11 for each URL that must pass through the reverse proxy. A common list would be the following:

    • Front End Server Web services external: webext.contoso.com (already configured by initial walk through)

    • Director Web services external for Director: webdirext.contoso.com (Optional if a Director is deployed)

    • Simple URL meet: meet.contoso.com

    • Simple URL dialin: dialin.contoso.com

    • Lync Autodiscover URL: lyncdiscover.contoso.com

    • Office Web Apps Server URL: officewebapps01.contoso.com

      Important

      The URL for the Office Web Apps Server will use a different httpsPort address. In step 7, you define the httpsPort as 443 and the httpPort as port 80. All other configuration settings are the same.

  13. On the left-hand side of the console, click the IIS server name. In the middle of the console, locate URL Rewrite under IIS. Double-click URL Rewrite to open the URL Rewrite rules configuration. You should see rules for each Server Farm that you created in the previous steps. If you do not, confirm that you clicked on the IIS Server name immediately below the Start Page node in the Internet Information Server Manager console.

  14. In the URL Rewrite dialog, using webext.contoso.com as an example, the full name of the rule as displayed is ARR_webext.contoso.com_loadbalance_SSL.

    • Double-click the rule to open the Edit Inbound Rule dialog.

    • Click Add… on the Conditions dialog.

    • On the Add Condition in Condition input: type {HTTP_HOST}. (As you type, a dialog appears that will let you select the condition). under Check if input string: select Matches the Pattern. In the Pattern input type *. Ignore case should be selected. Click OK.

    • Scroll down in the Edit Inbound Rule dialog to locate the Action dialog. Action Type: should be set to Route to Server Farm, Scheme: set to https://, Server farm: set to the URL that this rule applies to. For this example, this should be set to webext.contoso.com. Path: is set to /{R:0}

    • Click Apply to save your changes. Click Back to Rules to return to the URL Rewrite rules.

  15. Repeat the procedure defined in Step 14 for each of the SSL rewrite rules that you have defined, one per Server Farm URL.

    Warning

    By default, HTTP rules are created as well and are denoted by the similar naming to the SSL rules. For our current example, the HTTP rule would be named ARR_webext.contoso.com_loadbalance. No modifications are needed to these rules and they can be safely ignored.

To modify the properties of the web publishing rule in TMG 2010

  1. Click Start, point to Programs, select Microsoft Forefront TMG, and then click Forefront TMG Management.

  2. In the left pane, expand ServerName, and then click Firewall Policy.

  3. In the details pane, right-click the web server publishing rule that you created in the previous procedure (for example, LyncServerExternalRule), and then click Properties.

  4. On the Properties page, on the From tab, do the following:

    • In the This rule applies to traffic from these sources list, click Anywhere, and then click Remove.

    • Click Add.

    • In Add Network Entities, expand Networks, click External, click Add, and then click Close.

  5. On the To tab, ensure that the Forward the original host header instead of the actual one check box is selected.

  6. On the Bridging tab, select the Redirect request to SSL port check box, and then specify port 4443.

  7. On the Public Name tab, add the simple URLs (for example, meet.contoso.com and dialin.contoso.com).

  8. Click Apply to save changes, and then click OK.

  9. Click Apply in the details pane to save the changes and update the configuration.

To modify the properties of the web publishing rule in IIS ARR

  1. Click Start, select Programs, select Administrative Tools, and then click Internet Information Services (IIS) Manager.

  2. On the left-hand side of the console, click the IIS server name.

  3. In the middle of the console, locate URL Rewrite under IIS. Double-click URL Rewrite to open the URL Rewrite rules configuration.

  4. Double-click the rule that you need to modify. Make your modifications, as needed, in Match URL, Conditions, Server Variables or Action.

  5. Click Apply to commit your changes. Click Back to Rules to modify other rules, or close the IIS Manager console if you are done with your changes.