다음을 통해 공유


부분적으로 신뢰할 수 있는 호출자 허용

코드 라이브러리 공유는 CLR(공용 언어 런타임) 통합에서의 일반적인 시나리오입니다. 이 경우 사용자 정의 형식, 저장 프로시저, 사용자 정의 함수, 사용자 정의 집계, 트리거 또는 유틸리티 클래스가 포함된 어셈블리를 다른 어셈블리나 애플리케이션에서 액세스하는 경우가 많습니다. 여러 애플리케이션에서 공유할 코드 라이브러리는 강력한 이름으로 서명되어야 합니다.

런타임 코드 액세스 보안 시스템에서 완전히 신뢰하는 애플리케이션만 명시적으로 System.Security.AllowPartiallyTrustedCallers 특성이 표시되지 않은 공유 관리 코드 어셈블리에 액세스할 수 있습니다. 이 특성 System.Security.SecurityException 없이 강력한 이름의 서명된 어셈블리에 액세스하려고 시도하는 부분적으로 신뢰할 수 있는 어셈블리(또는 EXTERNAL_ACCESS 권한 집합을 사용하여 SQL Server SAFE 등록된 어셈블리)가 throw됩니다. 표시되는 오류 메시지는 다음과 유사합니다.

Msg 6522, Level 16, State 1, Procedure usp_RSTest, Line 0  
A .NET Framework error occurred during execution of user defined  
routine or aggregate 'usp_RSTest':  System.Security.SecurityException: That assembly does not allow partially trusted callers.  
System.Security.SecurityException: at  
System.Security.CodeAccessSecurityEngine.ThrowSecurityException(  
Assembly asm, PermissionSet granted,PermissionSet refused,  
RuntimeMethodHandle rmh, SecurityAction action, Object demand,  
IPermission permThatFailed) at  
Microsoft.Samples.SqlServer.TestResultSet.Test()  

전역 어셈블리 캐시에 추가된 어셈블리를 제외한 SQL Server 등록된 모든 어셈블리를 특성으로 AllowPartiallyTrustedCallers 표시하여 SQL Server 의해 로드된 어셈블리가 서로 액세스할 수 있도록 하는 것이 좋습니다. AllowPartiallyTrustedCallers 특성을 추가하면 예기치 않은 컨텍스트에서 부분적으로 신뢰할 수 있는 호출자가 어셈블리를 사용할 수 있으므로 안전을 위해 특성을 추가하기 전에 전역 어셈블리 캐시에 추가할 어셈블리를 철저하게 검토해야 합니다. 어셈블리를 완전히 신뢰할 수 없어야 합니다(SQL Server 사용 권한 집합에 등록 UNSAFE 됨).

자세한 내용은 .NET Framework 소프트웨어 개발 키트의 "부분적으로 신뢰할 수 있는 코드에서 라이브러리 사용"을 참조하십시오.

예제

Description

많은 서버 쪽 CLR 통합 애플리케이션에 유용한 유틸리티 클래스가 있다고 가정합니다. 예를 들어 이 클래스는 쿼리 호출 결과를 나타내는 클래스일 수 있습니다. 이 구성 요소를 공유할 수 있도록 이 유틸리티 클래스는 별도의 어셈블리에 배치됩니다. 그러면 CLR 통합 개체가 포함된 다른 여러 어셈블리에서 해당 어셈블리가 참조됩니다. 이 유틸리티 클래스는 다양한 서버 애플리케이션에서 사용되므로 신중하게 검토되고 모든 보안 문제가 해결됩니다. 그런 후에 이 유틸리티 클래스가 포함된 어셈블리에 AllowPartiallyTrustedCallers 특성이 적용되어 SAFE 또는 EXTERNAL_ACCESS 권한 집합으로 표시된 어셈블리에 포함된 CLR 통합 개체에서 유틸리티 클래스와 메서드가 별도의 어셈블리에 있는 경우에도 사용할 수 있게 합니다.

경우에 따라서는 쿼리 결과를 읽는 동안 새 연결을 열거나 모든 결과를 메모리로 읽어 오지 않고 명령을 실행하는 것이 유용할 수 있습니다. ADO.NET 2.0의 MARS(Multiple Active Result Set)는 이러한 작업을 가능하게 하는 기술입니다. 현재로서는 서버 쪽 프로그래밍에 사용되는 in-process 공급자에는 MARS가 구현되지 않습니다. 서버 쪽 커서를 사용하면 이러한 제한을 해결할 수 있습니다. 이 예제는 서버 쪽 커서를 사용하여 서버 쪽 프로그래밍을 지원하지 않는 MARS의 한계를 극복하는 방법을 보여 줍니다.

서버 쪽 커서를 사용하는 것은 서버 리소스 측면에서 비용이 많이 들며 SQL Server 쿼리 최적화 프로그램이 쿼리 성능을 향상시키는 것을 방지할 수 있습니다. 따라서 가능하면 항상 JOINs를 사용하여 코드를 재작성하는 방법도 고려할 만합니다.

이 클래스에 대한 API는 결과 집합에서 앞으로 또는 뒤로 이동할 수 있다는 점과 결과 집합이 열려 있는 중에도 연결에서 명령을 실행할 수 있다는 점을 제외하면 데이터 판독기와 유사합니다.

이 구현은 예제를 쉽게 이해할 수 있도록 하기 위해 상당 부분 간소화되었습니다. 보다 효율적인 구현 방법은 여러 행을 인출하여 인출된 행당 데이터베이스 반환이 발생하지 않게 하는 것입니다.

이 클래스를 사용하면 쿼리의 모든 결과로 데이터 세트를 채우는 것보다 메모리 사용량을 크게 줄일 수 있으며 이는 서버 쪽 프로그래밍에서 아주 중요합니다.

이 예제는 "부분적으로 신뢰하는 호출자 허용" 특성을 사용하여 결과 집합 어셈블리가 다른 어셈블리에서 안전하게 호출될 수 있는 라이브러리임을 나타내는 방법도 보여 줍니다. 이 방법은 안전하지 않은 권한을 사용하여 호출 어셈블리를 등록하는 것보다 좀 더 복잡하지만 훨씬 안전합니다. 호출 어셈블리를 안전한 어셈블리로 등록하면 호출 어셈블리가 서버의 리소스에 영향을 주지 않도록 제한하고 서버의 무결성에 손상을 주지 않도록 하므로 더 안전합니다.

이 예제에 대한 작성 지침에서는 원본 코드 파일이 c:\samples라는 디렉터리에 있다고 가정합니다. 다른 디렉터리를 사용하는 경우 Transact-SQL 스크립트를 수정해야 합니다. Transact-SQL 스크립트에는 AdventureWorks 데이터베이스도 필요합니다. Microsoft SQL Server 샘플 및 커뮤니티 프로젝트 홈페이지에서 AdventureWorks 샘플 데이터베이스를 다운로드할 수 있습니다.

예제를 빌드하고 실행하려면 첫 번째 코드 목록을 ResultSet.cs라는 파일에 붙여 넣고 csc /target:library ResultSet.cs를 사용하여 컴파일합니다.

두 번째 코드 목록을 TestResultSet.cs라는 파일에 붙여 넣고 csc /target:library /reference:ResultSet.dll TestResultSet.cs를 사용하여 컴파일합니다.

세 번째 코드 목록을 InstallCS.sql이라는 파일에 붙여 넣고 sqlcmd -E -I -i InstallCS.sql을 사용하여 컴파일합니다.

네 번째 코드 목록을 test.sql이라는 파일에 붙여넣고 sqlcmd -E -I -i test.sql을 사용하여 컴파일합니다.

다섯 번째 코드 목록을 Cleanup.sql이라는 파일에 붙여넣고 sqlcmd -E -I -i Cleanup.sql을 사용하여 컴파일합니다.

코드

// ResultSet.cs  
using System;  
using System.Collections;  
using System.Collections.Generic;  
using System.Text;  
using System.Data;  
using System.Data.Common;  
using System.Data.Sql;  
using System.Data.SqlTypes;  
using System.Data.SqlClient;  
using System.IO;  
using System.Globalization;  
using Microsoft.SqlServer.Server;  
using System.Runtime.Serialization;  
  
[assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1020:AvoidNamespacesWithFewTypes", Scope = "namespace", Target = "Microsoft.Samples.SqlServer")]  
[assembly: System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", Scope = "member", Target = "Microsoft.Samples.SqlServer.ResultSetEnumerator.System.Collections.IEnumerator.Current", MessageId = "System.InvalidOperationException.#ctor(System.String)")]  
  
namespace Microsoft.Samples.SqlServer {  
   // This is the base class for exceptions raised in the Adventure Works Cycles Storefront application.  
   [Serializable]  
   public class ResultSetException : System.Exception {  
      public ResultSetException() {}  
      public ResultSetException(string message) : base(message) {}  
      public ResultSetException(String message, Exception innerException) : base(message, innerException) {}  
      protected ResultSetException(SerializationInfo info, StreamingContext context) : base(info, context) {}  
   }  
  
   // This exception is raised when a user tries to register an email address which has already been taken.  
   [Serializable]  
   public class InvalidStateException : ResultSetException {  
      public InvalidStateException() {}  
      public InvalidStateException(string message) : base(message) {}  
      public InvalidStateException(String message, Exception innerException) : base(message, innerException) {}  
      protected InvalidStateException(SerializationInfo info, StreamingContext context) : base(info, context) {}  
   }  
  
   // This class is used to provide an API similar to a SQL data reader except that it is possible to navigate through any   
   // part of the result set.  It is also possible to execute commands while this class is still "open" even though the   
   // CLR in-proc provider does not support MARS at this time. This implementation is highly simplified to make the   
   // sample easy to understand.  A better implementation would fetch multiple rows to avoid a database turnaround per row   
   // fetched.  Using this class can have a significantly smaller memory footprint than filling a dataset with   
   // all the results of a query which is very important for server side programming.  
   [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Design", "CA1010:CollectionsShouldImplementGenericInterface"), System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Naming", "CA1710:IdentifiersShouldHaveCorrectSuffix")]  
   public class ResultSet : IDataReader, IDataRecord, IEnumerable, IDisposable {  
      // Which database to access  
      private SqlConnection connection;  
  
      // A cache or a single row's worth of data   
      private Microsoft.SqlServer.Server.SqlDataRecord results;  
  
      //A cache of whether the columns of the current cached row are set to the default value for the column  
      private int visibleFieldCount;  
  
      private string cursorName = string.Format(CultureInfo.InvariantCulture, "[{0}]", Guid.NewGuid().ToString());  
  
      internal Microsoft.SqlServer.Server.SqlDataRecord CurrentRecord {  
         get {  
            EnsureState(StateValues.read);  
            return results;  
         }  
      }  
  
      // Which database to access.  The connection passed to the setter must be open.  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "Microsoft.Samples.SqlServer.InvalidStateException.#ctor(System.String)")/*, System.CLSCompliant(false)*/]  
      public SqlConnection Connection {  
         get {  
            return connection;  
         }  
  
         set {  
            if (value == null)  
               throw new ArgumentNullException("value");  
            if (state != StateValues.created && state != StateValues.initialized)  
               throw new InvalidStateException("Cannot alter select command after opening the result set.");  
            if (value.State != ConnectionState.Open)  
               throw new InvalidStateException("Connection must be opened prior to setting result set connection value.");  
            connection = value;  
            if (selectCommand != null && connection != null)  
               state = StateValues.initialized;  
            else  
               state = StateValues.created;  
         }  
      }  
  
      private string selectCommand;  //What query to execute against the database  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "Microsoft.Samples.SqlServer.InvalidStateException.#ctor(System.String)")]  
      public string SelectCommand {  
         get {  
            return selectCommand;  
         }  
  
         set {  
            if (state != StateValues.created && state != StateValues.initialized)  
               throw new InvalidStateException("Cannot alter select command after opening the result set.");  
            selectCommand = value;  
            if (selectCommand != null && connection != null)  
               state = StateValues.initialized;  
            else  
               state = StateValues.created;  
         }  
      }  
  
      private bool isScrollable = true;  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "Microsoft.Samples.SqlServer.InvalidStateException.#ctor(System.String)")]  
      public bool IsScrollable {  
         get {  
            return isScrollable;  
         }  
  
         set {  
            if (state != StateValues.created && state != StateValues.initialized)  
               throw new InvalidStateException("Cannot alter IsScrollable property after opening the result set.");  
            isScrollable = value;  
         }  
      }  
  
      // The possible phases this object can go through from creation through termination.  
      // created:  Result set is instantiated but connection and select command are not set  
      // initialized:  Result set is instantiated and connection and select command are set  
      // opened:  The cursor has been created for browsing data  
      // read:  At least one row of data has been read and cached.  
      // closed:  Cursor is closed and deallocated, and connection is closed.  No further operations are possible.  
      private enum StateValues { created, initialized, opened, read, closed };   
  
      // What the current phase is  
      private StateValues state = StateValues.created;  
  
      // It is possible to create the result set with this constructor and then set the connection  
      // and select command using the public properties.  
      public ResultSet() {}  
  
      // Or you can create the result set all at once using this form of the constructor.  
      public ResultSet(SqlConnection connection, string selectCommand) {  
         this.Connection = connection;  
         this.SelectCommand = selectCommand;  
         state = StateValues.initialized;  
      }  
  
      // By default the result set is scrollable, but you can create a forward-only result set using this constructor   
      // and specifying false for isScrollable.  
      public ResultSet(SqlConnection connection, string selectCommand, bool isScrollable) {  
         this.Connection = connection;  
         this.SelectCommand = selectCommand;  
         this.IsScrollable = isScrollable;  
         state = StateValues.initialized;  
      }  
  
      // This method should be called just before the result set is to be used to pull data.  The open doesn't happen as   
      // part of creation as server resources are being consumed while the result set is open.  Be sure to close an open   
      // result set as soon as possible to release server side resources.  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "Microsoft.Samples.SqlServer.InvalidStateException.#ctor(System.String)")]  
      public void Open() {  
         switch (state) {  
            case StateValues.created:  
               throw new InvalidStateException("Cannot open result set until it is properly initialized");  
            case StateValues.opened:  
            case StateValues.read:  
               throw new InvalidStateException("Result set already open.");  
            case StateValues.closed:  
               throw new InvalidStateException("Cannot reopen closed result set.");  
            default:  
               break;  
         }  
         if (state == StateValues.initialized) {  
            // There are many possible cursor options.  We only allow control of scrollability.  
            // To keep the implementation simple we only permit read operations.  
            string scrollMode = (isScrollable) ? "SCROLL" : "FORWARD_ONLY";  
  
            // Caller must ensure that any user input which is part of selectCommand is free from injection attacks.  
            SqlCommand cmd = connection.CreateCommand();  
            cmd.CommandText = string.Format(CultureInfo.InvariantCulture, "DECLARE {0} CURSOR GLOBAL {1} READ_ONLY  FOR {2}; OPEN {0};",  
                cursorName, scrollMode, selectCommand);  
            cmd.ExecuteNonQuery();  
            state = StateValues.opened;  
         }  
      }  
  
      // Free all server and client side resources being consumed for this result set.  Most operations  
      // are no longer valid after calling this method on the result set.  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "Microsoft.Samples.SqlServer.InvalidStateException.#ctor(System.String)")]  
      public void Close() {  
         switch (state) {  
            case StateValues.created:  
            case StateValues.initialized:  
               throw new InvalidStateException("Cannot close unopened result set.");  
            case StateValues.closed:  
               throw new InvalidStateException("Result set already closed.");  
            case StateValues.opened:  
            case StateValues.read:  
               SqlCommand cmd = connection.CreateCommand();  
               cmd.CommandText =  
                   string.Format(CultureInfo.InvariantCulture, "CLOSE {0}; DEALLOCATE {0};", cursorName);  
               try {  
                  cmd.ExecuteNonQuery();  
               }  
               finally {  
                  results = null;  
                  state = StateValues.closed;  
               }  
               break;  
            default:  
               throw new InvalidStateException(  
                   string.Format(CultureInfo.InvariantCulture,  
                   "Unknown result set state {0}", state.ToString()));  
         }  
  
      }  
  
      // This implementation does not support multi-dimensional data. Always zero.  
      public int Depth {  
         get {  
            EnsureState(StateValues.read);  
            return 0;  
         }  
      }  
  
      // Normally this would return a data table with schema information about the data being returned.  
      // Unfortunately this isn't implemented in the in-proc provider, so always throw a NYI exception.  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "System.NotImplementedException.#ctor(System.String)")]  
      public DataTable GetSchemaTable() {  
         throw new NotImplementedException("GetSchemaTable is not currently implemented.");  
      }  
  
      // Determines if there is any data to read. True if there is data to read, otherwise false.  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "System.NotImplementedException.#ctor(System.String)")]  
      public bool HasRows {  
         get {  
            throw new NotImplementedException("HasRows is not currently implemented.");  
         }  
      }  
  
      // Determines if the result set is available for use  
      // Returns false if the result set is available for use, otherwise true.  
      public bool IsClosed {  
         get { return state == StateValues.closed; }  
      }  
  
      // Multiple result sets are not supported.  Always throws an invalid operation exception.  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "System.InvalidOperationException.#ctor(System.String)")]  
      public bool NextResult() {  
         throw new InvalidOperationException("Multiple result sets are not support for result set class");  
      }  
  
      // Fetches the next row from the result set on the server and makes that data available to the caller.  
      // Returns True if and only if there is data to read.  
      public bool Read() {  
         return fetch(string.Format(CultureInfo.InvariantCulture, "FETCH NEXT FROM {0};", cursorName));  
      }  
  
      // Returns the number of records affected by processing this result set.  This may only be called when the result set  
      // is closed.  Since this implementation supports only read-only access, there can never be any rows affected (always -1).  
      public int RecordsAffected {  
         get {  
            EnsureState(StateValues.closed);  
            return -1;  
         }  
      }  
  
      // Move to a particular record number in the results returned by the query.  Requires a scrollable result set.  
      // Returns True if and only if there is data to read.  
      public bool ReadAbsolute(int position) {  
         EnsureScroll();  
         return fetch(string.Format(CultureInfo.InvariantCulture, "FETCH ABSOLUTE {0} FROM {1};",  
             position, cursorName));  
      }  
  
      // Move to the first result in the results returned by the query and read it.  Requires a scrollable result set.  
      // Returns True if and only if there is data to read.  
      public bool ReadFirst() {  
         EnsureScroll();  
         return fetch(string.Format(CultureInfo.InvariantCulture, "FETCH FIRST FROM {0};", cursorName));  
      }  
  
      // Move to the last result in the results returned by the query and read it.  Requires a scrollable result set.  
      // Returns True if and only if there is data to read.  
      public bool ReadLast() {  
         EnsureScroll();  
         return fetch(string.Format(CultureInfo.InvariantCulture, "FETCH LAST FROM {0};", cursorName));  
      }  
  
      // Move to the immediate prior result in the results returned by the query, and read it.  Requires a scrollable   
      // result set.  Returns True if and only if there is data to read.  
      public bool ReadPrevious() {  
         EnsureScroll();  
         return fetch(string.Format(CultureInfo.InvariantCulture, "FETCH PREVIOUS FROM {0};", cursorName));  
      }  
  
      // Move the specified number of records forward or backward from the current position  
      // in the results returned by the query and read it.  Requires a scrollable result set.  
      /// position is how many records forward or backward. Returns True if and only if there is data to read.  
      public bool ReadRelative(int position) {  
         EnsureScroll();  
         return fetch(string.Format(CultureInfo.InvariantCulture, "FETCH RELATIVE {0} FROM {1};", position, cursorName));  
      }  
  
      // Dispose is idential to closing the result set.  
      public void Dispose() {  
         Dispose(true);  
      }  
  
      protected virtual void Dispose(bool shouldClearManagedResources) {  
         Close();  
         if (shouldClearManagedResources)  
            connection = null;  
      }  
  
      // The number of columns available in the results just read  
      public int FieldCount {  
         get {  
            EnsureState(StateValues.read);  
            return results.FieldCount;  
         }  
      }  
  
      public int VisibleFieldCount {  
         get {  
            EnsureState(StateValues.read);  
            return visibleFieldCount;  
         }  
      }  
  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "System.InvalidOperationException.#ctor(System.String)")]  
      public IDataReader GetData(int i) {  
         throw new InvalidOperationException("GetData is no longer implemented");  
      }  
  
      // What kind of data is acceptable for the specified column  
      public string GetDataTypeName(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetDataTypeName(i);  
      }  
  
      // Returns the object which represents the kind of data which is acceptable for the specified column.  
      public Type GetFieldType(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetFieldType(i);  
      }  
  
      // Returns the symbolic id of the specified column  
      public string GetName(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetName(i);  
      }  
  
      // Given a column name, returns the integer id the column.  
      public int GetOrdinal(string name) {  
         EnsureState(StateValues.read);  
         //Note: this implementation does not deal with all collation and internationalization issues.  
         return results.GetOrdinal(name);  
      }  
  
      // Places all the values contained in the current row into the supplied object array.  The elements  
      // of the array are based on the SQL type system.  
      public int GetSqlValues(object[] values) {  
         EnsureState(StateValues.read);  
         return results.GetSqlValues(values);  
      }  
  
      // Places all the values contained in the current row into the supplied object array.  The   
      // elements of the array are based on the CLR type system.  
      public int GetValues(object[] values) {  
         EnsureState(StateValues.read);  
         return results.GetValues(values);  
      }  
  
      // Accesses the data in the specified column by name  
      public object this[string name] {  
         get {  
            EnsureState(StateValues.read);  
            return results[name];  
         }  
      }  
  
      // Accesses the data in the specified column by numerical id  
      public object this[int i] {  
         get {  
            EnsureState(StateValues.read);  
            return results[i];  
         }  
      }  
  
      // The following methods provide access to column data for the current row as objects using the Sql type system.    
      // The advantage of using this type system is that you can deal very precisely with the database's concept of null.    
      // Also, some types (such as SqlXml) provide more efficient methods of data access than the CLR type system.  
  
      // Access the data in the specified column in the current row as a SqlBinary object  
      public SqlBinary GetSqlBinary(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlBinary(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlBoolean object  
      public SqlBoolean GetSqlBoolean(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlBoolean(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlByte object  
      public SqlByte GetSqlByte(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlByte(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlBytes object  
      public SqlBytes GetSqlBytes(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlBytes(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlChars object  
      public SqlChars GetSqlChars(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlChars(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlDateTime object  
      public SqlDateTime GetSqlDateTime(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlDateTime(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlDecimal object  
      public SqlDecimal GetSqlDecimal(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlDecimal(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlDouble object  
      public SqlDouble GetSqlDouble(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlDouble(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlGuid object  
      public SqlGuid GetSqlGuid(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlGuid(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlInt16 object  
      public SqlInt16 GetSqlInt16(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlInt16(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlInt32 object  
      public SqlInt32 GetSqlInt32(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlInt32(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlInt64 object  
      public SqlInt64 GetSqlInt64(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlInt64(i);  
      }  
  
      // Return schema information for the specified column  
      public Microsoft.SqlServer.Server.SqlMetaData GetSqlMetaData(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlMetaData(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlMoney object  
      public SqlMoney GetSqlMoney(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlMoney(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlSingle object  
      public SqlSingle GetSqlSingle(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlSingle(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlString object  
      public SqlString GetSqlString(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlString(i);  
      }  
  
      // Access the data in the specified column in the current row as a Sql object  
      public object GetSqlValue(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlValue(i);  
      }  
  
      // Access the data in the specified column in the current row as a SqlXml object  
      public SqlXml GetSqlXml(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetSqlXml(i);  
      }  
  
      // The following methods provide access to column data for the current row using the CLR type system.  The advantage   
      // of using these methods is seamless integration with other CLR components.  
  
      // Access the data in the specified column in the current row as a Boolean  
      public bool GetBoolean(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetBoolean(i);  
      }  
  
      // Access the data in the specified column in the current row as a byte   
      public byte GetByte(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetByte(i);  
      }  
  
      // Copies bytes from the specified column of the current row into a buffer supplied by the caller.  
      // i is the columm, fieldOffset is where to start in the column's data, buffer is where to place the bytes,  
      // bufferOffset is where to start in the buffer, and length is how many bytes to copy.    
      // Returns how many bytes were actually copied.  
      public long GetBytes(int i, long fieldOffset, byte[] buffer, int bufferoffset, int length) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetBytes(i, fieldOffset, buffer, bufferoffset, length);  
      }  
  
      // Access the data in the specified column in the current row as a  char.  
      public char GetChar(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetChar(i);  
      }  
  
      // Copies characters from the specified column of the current row into a buffer supplied by the caller.  
      // i is the column, fieldoffset is where to start in the column's data, buffer is where to place the characters,  
      // bufferoffset is where to start in the buffer, length is how many characters to copy.  
      // Returns how many characters were actually copied.  
      public long GetChars(int i, long fieldoffset, char[] buffer, int bufferoffset, int length) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetChars(i, fieldoffset, buffer, bufferoffset, length);  
      }  
  
      // Access the data in the specified column in the current row as a DateTime   
      public DateTime GetDateTime(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetDateTime(i);  
      }  
  
      // Access the data in the specified column in the current row as a decimal.   
      public decimal GetDecimal(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetDecimal(i);  
      }  
  
      // Access the data in the specified column in the current row as a double  
      public double GetDouble(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetDouble(i);  
      }  
  
      // Access the data in the specified column in the current row as a float  
      public float GetFloat(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetFloat(i);  
      }  
  
      // Access the data in the specified column in the current row as a Guid   
      public Guid GetGuid(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetGuid(i);  
      }  
  
      // Access the data in the specified column in the current row as a short   
      public short GetInt16(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetInt16(i);  
      }  
  
      // Access the data in the specified column in the current row as an int  
      public int GetInt32(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetInt32(i);  
      }  
  
      // Access the data in the specified column in the current row as a long   
      public long GetInt64(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetInt64(i);  
      }  
  
      // Access the data in the specified column in the current row as a string   
      public string GetString(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetString(i);  
      }  
  
      // Access the data in the specified column in the current row as an object    
      public object GetValue(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.GetValue(i);  
      }  
  
      // Returns true if and only if the data in the specified column of the current row is null as defined by the database.    
      // Note this is different than the CLR concept of null. The parameter is the column.  
      public bool IsDBNull(int i) {  
         EnsureState(StateValues.read);  
         EnsureOrdinal(i);  
         return results.IsDBNull(i);  
      }  
  
      // Utility method which executes a server side cursor motion command and reads the row at the current location of   
      // the cursor after the motion is complete.  Reading one row at a time can be inefficient, see comments at the start   
      // of this class. The parameter is the SQL cursor motion command to execute. Returns True if and only if there is data to read.  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "Microsoft.Samples.SqlServer.ResultSet.EnsureState(Microsoft.Samples.SqlServer.ResultSet+StateValues,Microsoft.Samples.SqlServer.ResultSet+StateValues,System.String)")]  
      private bool fetch(string commandText) {  
         EnsureState(StateValues.read, StateValues.opened, "The result set must be open to perform the read operation.");  
         SqlCommand cmd = connection.CreateCommand();  
         cmd.CommandText = commandText;  
  
         SqlDataReader reader = null;  
         try {  
            reader = cmd.ExecuteReader();  
            // If there is no data, return false;  
            if (!reader.Read()) {  
               state = StateValues.opened;  
               return false;  
            }  
            else {  
               // Otherwise, advance the state to 'read'  
               state = StateValues.read;  
               // If we haven't cached schema information get it now  
               if (results == null) FetchMetadata(reader);  
               // Cache data values  
               object[] values = new object[FieldCount];  
               reader.GetSqlValues(values);  
               results.SetValues(values);  
               // Indicate there is data read by returning true  
               return true;  
            }  
         }  
         finally {  
            if (reader != null) {  
               reader.Close();  
               reader = null;  
            }  
         }  
      }  
  
      // Helper method for the fetch method.  Initializes the data structures which cache the schema information for the   
      // current query. The parameter is the reader from where schema information may be read.  
      private void FetchMetadata(SqlDataReader reader) {  
         int columnCount = reader.FieldCount;  
         visibleFieldCount = columnCount;  
         // Initialize the data cache  
         SqlMetaData[] metadata = new SqlMetaData[visibleFieldCount];  
  
         // Fill the schema cache for each column  
         DataTable schemaTable = reader.GetSchemaTable();  
         SqlString collationString = new SqlString(String.Empty);  
  
         for (int i = 0 ; i < metadata.Length ; i++) {  
            DataRow columnSchema = schemaTable.Rows[i];  
            metadata[i] = new SqlMetaData(  
                    reader.GetName(i),  
                    (SqlDbType)columnSchema["ProviderType"],  
                    (int)columnSchema["ColumnSize"],  
                    (byte)((short)columnSchema["NumericPrecision"]),  
                    (byte)((short)columnSchema["NumericScale"]),  
                    collationString.LCID,  
                    collationString.SqlCompareOptions,  
                    (Type)columnSchema["DataType"]  
                );  
         }  
         results = new Microsoft.SqlServer.Server.SqlDataRecord(metadata);  
      }  
  
      // Helper method which validates the state of the result set before processing a   
      // requested operation.  If the result set is in an invalid state an exception is thrown.  
      private void EnsureState(StateValues desiredState) {  
         if (state != desiredState) {  
            // Compute the default message  
            string message = string.Format(CultureInfo.InvariantCulture, "Expected result set state to be {0} but it was {1}",  
                desiredState.ToString(), state.ToString());  
            // If we have more specific information, provide a different message.  
            if (desiredState == StateValues.read)  
               message = "You must read a valid row of the result set before performing the requested operation.";  
            throw new InvalidStateException(message);  
         }  
      }  
  
      // Similar to the single argument EnsureState method except that the two specified states   
      // are both legal and a custom error message must be provided.  
      private void EnsureState(StateValues desiredState1, StateValues desiredState2, string message) {  
         if (state != desiredState1 && state != desiredState2)  
            throw new InvalidStateException(message);  
      }  
  
      // Makes certain that the requested column is valid, and throws an exception with an error message if it isn't.    
      // This would be more useful than the error message given when accessing beyond the valid boundary of an array,   
      // for example.  The parameter is the column trying to be accessed  
      private void EnsureOrdinal(int i) {  
         if (i >= results.FieldCount)  
            throw new ArgumentException(  
                string.Format(CultureInfo.InvariantCulture, "Attempt to access column {0} when only {1} columns exist",  
                i, results.FieldCount));  
      }  
  
      // Makes certain that the result set is in a proper state to read data, and that  
      // scrolling is allowed.  This method is called from methods which require scrolling capabilities.  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "System.InvalidOperationException.#ctor(System.String)")]  
      private void EnsureScroll() {  
         if (!isScrollable)  
            throw new InvalidOperationException("Attempting to execute a scroll operation on a non-scrollable result set.");  
      }  
  
      public IEnumerator GetEnumerator() {  
         return new ResultSetEnumerator(this);  
      }  
   }  
  
   public class ResultSetEnumerator : IEnumerator {  
      private bool isRead;  
  
      private ResultSet resultSetToEnumerate;  
  
      public ResultSetEnumerator(ResultSet resultSetToEnumerate) {  
         this.resultSetToEnumerate = resultSetToEnumerate;  
      }  
  
      // Returns the current element of a result set which is represented by a SqlDataRecord  
      object IEnumerator.Current {  
         get {  
            if (!isRead)  
               throw new InvalidOperationException(  
                   "The enumerator is positioned before the first element "  
                   + "of the collection or after the last element");  
            return resultSetToEnumerate.CurrentRecord;  
  
         }  
      }  
  
      [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Globalization", "CA1303:DoNotPassLiteralsAsLocalizedParameters", MessageId = "System.InvalidOperationException.#ctor(System.String)")]  
      public SqlDataRecord Current {  
         get {  
            if (!isRead)  
               throw new InvalidOperationException(  
                   "The enumerator is positioned before the first element "  
                   + "of the collection or after the last element");  
            return resultSetToEnumerate.CurrentRecord;  
         }  
      }  
  
      // Advance to the next valid element of a result set; returns True if this position has a valid element   
      public bool MoveNext() {  
         if (!isRead) {  
            if (resultSetToEnumerate.ReadFirst()) {  
               isRead = true;  
               return true;  
            }  
            else  
               return false;  
         }  
         else {  
            return resultSetToEnumerate.Read();  
         }  
      }  
  
      // Reset the current position of the enumerator to just prior to the current element  
      public void Reset() {  
         isRead = false;  
      }  
   }  
}  

코드

// TestResultSet.cs  
using System;  
using System.Collections.Generic;  
using System.Text;  
using System.Configuration;  
using System.Data;  
using System.Data.SqlClient;  
using System.Data.SqlTypes;  
using Microsoft.SqlServer.Server;  
  
// Main application that increases the prices for the most popular bikes in order to demonstrate using server side cursors   
// to browser results and update in parallel.  
  
namespace Microsoft.Samples.SqlServer {  
   public sealed class TestResultSet {  
      // The factor to mulitply by the current price to get the new price for each color  
      private const String priceIncreases = "Black, 1.02, Silver, 1.01, Red, 1.05, Yellow, 1.02, Green, 1.03";  
  
      // Given the name of a color, return the price increase factor as a SqlMoney object.  
      private static readonly Dictionary<String, SqlMoney> increaseDictionary  
          = new Dictionary<String, SqlMoney>(priceIncreases.Length);  
  
      // Don't allow construction of instances since the public portion of this class is only used to contain static methods.  
      private TestResultSet() {}  
  
      // The Adventure Works Cycles corporation needs to increase the standard costs and list price for its most popular   
      // bikes due to price increases for the paint used on those bikes.  This program demonstrates browsing popular bikes   
      // and updating prices in parallel using the result set sample to implement that scenario.  Note that programmers   
      // should always consider whether using a JOIN in a server side query or update would be more efficient that using this   
      // style of programming.  
      public static void Test() {  
         // Use the priceIncreases constant to initialize entries in the increaseDictionary collection.  
         InitializeIncreaseDictionary();  
  
         SqlConnection myConnection = null;  
         bool isRSOpened = false;  
  
         // Initialize the command to get most popular bikes  
         myConnection = new SqlConnection("context connection=true");  
         ResultSet rs = null;  
         try {  
            myConnection.Open();  
            rs = new ResultSet(myConnection,  
                "SELECT TOP 10 P.ProductID, P.Name, P.Color, P.StandardCost, P.ListPrice, "  
                + "sum(SOD.OrderQty) FROM Production.Product AS P "  
                + "JOIN Sales.SalesOrderDetail AS SOD ON P.ProductID = SOD.ProductID "  
                + "JOIN Production.ProductSubcategory AS PSC "  
                + "ON P.ProductSubcategoryID = PSC.ProductSubcategoryID "  
                + "JOIN Production.ProductCategory AS PC "  
                + "ON PSC.ProductCategoryID = PC.ProductCategoryID "  
                + "WHERE PC.Name = 'Bikes' "  
                + "GROUP BY P.ProductID, P.Name, P.Color, P.StandardCost, P.ListPrice "  
                + "ORDER BY sum(SOD.OrderQty) desc;");  
  
            // Initialize the command to update the price of a product  
            SqlCommand updateCommand = myConnection.CreateCommand();  
            updateCommand.CommandText = "usp_UpdateProductPrice";  
            updateCommand.CommandType = CommandType.StoredProcedure;  
  
            SqlParameter productIDParameter = new SqlParameter("@ProductID", SqlDbType.Int);  
            updateCommand.Parameters.Add(productIDParameter);  
            SqlParameter standardCostParameter = new SqlParameter("@StandardCost", SqlDbType.Money);  
            updateCommand.Parameters.Add(standardCostParameter);  
            SqlParameter listPriceParameter = new SqlParameter("@ListPrice", SqlDbType.Money);  
            updateCommand.Parameters.Add(listPriceParameter);  
  
            rs.Open();  
            isRSOpened = true;  
  
            while (rs.Read()) {  
               // Column two in the result set contains the color of the bike  
               SqlMoney rateOfIncrease = increaseDictionary[rs.GetString(2)];  
  
               // Column zero in the result set contains the product ID  
               productIDParameter.Value = rs.GetInt32(0);  
  
               // Column three in the result set contains the current standard cost  
               standardCostParameter.Value = rs.GetSqlMoney(3) * rateOfIncrease;  
  
               // Column four in the result set contains the current list price  
               listPriceParameter.Value = rs.GetSqlMoney(4) * rateOfIncrease;  
  
               // Update the prices of one of the popular bikes based on its color and current prices.    
               updateCommand.ExecuteNonQuery();  
            }  
         }  
         finally {  
            if (myConnection != null) {  
  
               if (isRSOpened)  
                  rs.Close();  
  
               myConnection.Close();  
            }  
         }  
      }  
  
       // Helper function which fills the dictonary containing the price increases for each color  
      static void InitializeIncreaseDictionary() {  
         // Initialize a dictionary which contains the price increase factors for each color  
         String[] splitIncreases = priceIncreases.Split(new Char[] { ',' });  
  
         for ( int i = 0 ; i < splitIncreases.Length - 1 ; i += 2 ) {  
            increaseDictionary[splitIncreases[i].Trim()] = SqlMoney.Parse(splitIncreases[i + 1].Trim());  
         }  
      }  
   }  
}  

코드

-- InstallCS.sql  
USE AdventureWorks  
GO  
  
IF EXISTS (SELECT [name] from sys.procedures WHERE [name] = N'usp_RSTest')  
DROP PROCEDURE usp_RSTest;  
GO  
  
IF EXISTS (SELECT [name] from sys.procedures WHERE [name] = N'usp_UpdateProductPrice')  
DROP PROCEDURE usp_UpdateProductPrice;  
GO  
  
IF EXISTS (SELECT [name] FROM sys.assemblies WHERE [name] = N'TestResultSet')  
DROP ASSEMBLY TestResultSet;  
GO  
  
IF EXISTS (SELECT [name] FROM sys.assemblies WHERE [name] = N'ResultSet')  
DROP ASSEMBLY ResultSet;  
GO  
  
-- Add the assembly which contains the CLR methods we want to invoke on the server.  
DECLARE @SamplesPath nvarchar(1024);  
  
CREATE ASSEMBLY [ResultSet]  
FROM 'C:\ResultSet\ResultSet.dll'  
WITH permission_set = safe;  
  
CREATE ASSEMBLY [TestResultSet]    
FROM 'C:\ResultSet\TestResultSet.dll'  
WITH permission_set = safe;  
GO  
  
CREATE PROCEDURE [usp_RSTest]  
AS EXTERNAL NAME [TestResultSet].[Microsoft.Samples.SqlServer.TestResultSet].Test  
GO  
  
CREATE PROCEDURE usp_UpdateProductPrice(  
    @ProductID int,  
    @StandardCost money,  
    @ListPrice money  
)     
AS  
SET NOCOUNT ON;  
  
UPDATE Production.Product  
SET StandardCost = @StandardCost,  
    ListPrice = @ListPrice  
WHERE ProductID = @ProductID;  
GO  

코드

-- test.sql  
USE AdventureWorks  
GO  
  
SELECT TOP 10 P.ProductID, P.Name, P.Color, P.StandardCost, P.ListPrice, sum(SOD.OrderQty) FROM Production.Product AS P  
JOIN Sales.SalesOrderDetail AS SOD ON P.ProductID = SOD.ProductID  
JOIN Production.ProductSubcategory AS PSC ON P.ProductSubcategoryID = PSC.ProductSubcategoryID  
JOIN Production.ProductCategory AS PC ON PSC.ProductCategoryID = PC.ProductCategoryID  
WHERE PC.Name = 'Bikes'  
GROUP BY P.ProductID, P.Name, P.Color, P.StandardCost, P.ListPrice   
ORDER BY sum(SOD.OrderQty) desc;  
GO  
  
EXEC usp_RSTest  
GO  
  
SELECT TOP 10 P.ProductID, P.Name, P.Color, P.StandardCost, P.ListPrice, sum(SOD.OrderQty) FROM Production.Product AS P  
JOIN Sales.SalesOrderDetail AS SOD ON P.ProductID = SOD.ProductID  
JOIN Production.ProductSubcategory AS PSC ON P.ProductSubcategoryID = PSC.ProductSubcategoryID  
JOIN Production.ProductCategory AS PC ON PSC.ProductCategoryID = PC.ProductCategoryID  
WHERE PC.Name = 'Bikes'  
GROUP BY P.ProductID, P.Name, P.Color, P.StandardCost, P.ListPrice   
ORDER BY sum(SOD.OrderQty) desc;  
GO  
  

코드

-- Cleanup.sql  
USE AdventureWorks  
GO  
  
IF EXISTS (SELECT [name] from sys.procedures WHERE [name] = N'usp_RSTest')  
DROP PROCEDURE usp_RSTest;  
GO  
  
IF EXISTS (SELECT [name] from sys.procedures WHERE [name] = N'usp_UpdateProductPrice')  
DROP PROCEDURE usp_UpdateProductPrice;  
GO  
  
IF EXISTS (SELECT [name] FROM sys.assemblies WHERE [name] = N'TestResultSet')  
DROP ASSEMBLY TestResultSet;  
GO  
  
IF EXISTS (SELECT [name] FROM sys.assemblies WHERE [name] = N'ResultSet')  
DROP ASSEMBLY ResultSet;  
GO  

참고 항목

CLR 통합 보안