다음을 통해 공유


방법: 리플렉션 전용 컨텍스트에 어셈블리 로드

업데이트: 2007년 11월

리플렉션 전용 로드 컨텍스트를 사용하면 다른 플랫폼이나 다른 버전의 .NET Framework에 대해 컴파일된 어셈블리를 검사할 수 있습니다. 이 컨텍스트에 로드된 코드는 검사만 할 수 있고 실행할 수는 없습니다. 즉, 생성자를 실행할 수 없기 때문에 개체를 만들 수 없고 코드를 실행할 수 없기 때문에 종속성이 자동으로 로드되지 않습니다. 종속성을 검사하려면 직접 로드해야 합니다.

리플렉션 전용 로드 컨텍스트에 어셈블리를 로드하려면

  1. ReflectionOnlyLoad(String) 메서드 오버로드를 사용하여 표시 이름이 지정된 어셈블리를 로드하거나 ReflectionOnlyLoadFrom 메서드를 사용하여 경로가 지정된 어셈블리를 로드합니다. 어셈블리가 이진 이미지인 경우 ReflectionOnlyLoad(array<Byte[]) 메서드 오버로드를 사용합니다.

    참고:

    리플렉션 전용 컨텍스트를 사용하여 실행 컨텍스트의 버전이 아닌 .NET Framework의 버전에서 mscorlib.dll의 버전을 로드할 수는 없습니다.

  2. 어셈블리에 종속성이 있는 경우 ReflectionOnlyLoad 메서드를 통해 이러한 종속성이 로드되지 않습니다. 종속성을 검사하려면 직접 로드해야 합니다.

  3. 어셈블리의 ReflectionOnly 속성을 사용하여 리플렉션 전용 컨텍스트에 어셈블리가 로드되는지 여부를 확인합니다.

  4. 어셈블리 또는 어셈블리의 형식에 특성이 적용된 경우 CustomAttributeData 클래스를 통해 이러한 특성을 검사하여 리플렉션 전용 컨텍스트에서 코드를 실행하려는 시도가 수행되지 않았는지 확인합니다. 어셈블리, 멤버, 모듈 또는 매개 변수에 적용된 특성을 나타내는 CustomAttributeData 개체를 가져오려면 CustomAttributeData.GetCustomAttributes 메서드의 적절한 오버로드를 사용합니다.

    참고:

    어셈블리 또는 해당 내용에 적용된 특성은 해당 어셈블리에서 정의되거나 리플렉션 전용 컨텍스트에 로드된 다른 어셈블리에서 정의될 수 있습니다. 특성의 정의 여부를 미리 확인할 수 있는 방법은 없습니다.

예제

다음 코드 예제에서는 리플렉션 전용 컨텍스트에 로드된 어셈블리에 적용되는 특성을 검사하는 방법을 보여 줍니다.

이 코드 예제에서는 두 개의 생성자와 하나의 속성을 사용하여 사용자 지정 특성을 정의합니다. 특성은 어셈블리, 어셈블리에 선언된 형식, 형식의 메서드 및 메서드의 매개 변수에 적용됩니다. 이 예제를 실행하면 어셈블리가 리플렉션 전용 컨텍스트에 자동으로 로드되고 이 어셈블리와 이 어셈블리에 포함된 형식 및 멤버에 적용된 사용자 지정 특성에 대한 정보가 표시됩니다.

참고:

코드 예제를 단순화하기 위해 어셈블리가 자동으로 로드되고 검사되므로 일반적으로 실행 컨텍스트와 리플렉션 전용 컨텍스트 둘 다에 동일한 어셈블리가 로드되지는 않습니다.

Imports System
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind, 
    SecondKind, 
    ThirdKind, 
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of 
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note    
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind, 
         new string[] { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })] 
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata 
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana 
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'", 
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", 
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
   FirstKind, SecondKind, ThirdKind, FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
   // Data for properties.
   ExampleKind kindValue;
   String^ noteValue;
   array<String^>^ arrayStrings;
   array<int>^ arrayNumbers;

   // Constructors. 
   void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
   {
      kindValue = initKind;
      arrayStrings = initStrings;
   }
public:
   ExampleAttribute()
   {
      ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind )
   {
      ExampleAttributeInitialize( initKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
   {
      ExampleAttributeInitialize( initKind, initStrings );
   }

   // Properties. The Note and Numbers properties must be read/write, so they
   // can be used as named parameters.
   //
   property ExampleKind Kind 
   {
      ExampleKind get()
      {
         return kindValue;
      }
   }
   property array<String^>^ Strings
   {
      array<String^>^ get()
      {
         return arrayStrings;
      }
   }
   property String^ Note 
   {
      String^ get()
      {
         return noteValue;
      }

      void set( String^ value )
      {
         noteValue = value;
      }
   }
   property array<int>^ Numbers
   {
      array<int>^ get()
      {
         return arrayNumbers;
      }

      void set( array<int>^ value )
      {
         arrayNumbers = value;
      }
   }
};

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];

// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind, 
         gcnew array<String^> { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = gcnew array<int> { 53, 57, 59 })] 
public ref class Test
{
public:
   // The example attribute is applied to a method, using the
   // parameterless constructor and supplying a named argument.
   // The attribute is also applied to the method parameter.
   //
   [Example(Note="This is a note on a method.")]
   void TestMethod( [Example] Object^ arg ){}

   // Main() gets objects representing the assembly, the test
   // type, the test method, and the method parameter. Custom
   // attribute data is displayed for each of these.
   //
   static void Main()
   {
      Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
      Type^ t = assembly->GetType( "Test" );
      MethodInfo^ m = t->GetMethod( "TestMethod" );
      array<ParameterInfo^>^p = m->GetParameters();

      Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
      Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
      Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
      Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
   }

private:
    static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
    {
        if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
        {
            Console::WriteLine("         Array of '{0}':", cata->ArgumentType);

            for each (CustomAttributeTypedArgument^ cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
            {
                Console::WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement->ArgumentType, cataElement->Value);
            }
        }
        else
        {
            Console::WriteLine( "         Type: '{0}'  Value: '{1}'",
               cata->ArgumentType, cata->Value );
        }
    }

   static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
   {
      for each ( CustomAttributeData^ cad in attributes )
      {
         Console::WriteLine( "   {0}", cad );
         Console::WriteLine( "      Constructor: '{0}'", cad->Constructor );

         Console::WriteLine( "      Constructor arguments:" );
         for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
         {
            ShowValueOrArray(cata);
         }

         Console::WriteLine( "      Named arguments:" );
         for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
         {
            Console::WriteLine( "         MemberInfo: '{0}'", cana.MemberInfo );
            ShowValueOrArray(cana.TypedValue);
         }
      }
   }
};

int main()
{
   Test::Main();
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/

참고 항목

참조

ReflectionOnlyLoad

ReflectionOnly

CustomAttributeData