다음을 통해 공유

연습: 작업 및 XML HTTP 요청(IXHR2)을 사용하여 연결

  • 아티클

사용 하는 방법을 보여 주는이 예제는 IXMLHTTPRequest2 및 IXMLHTTPRequest2Callback 인터페이스와 웹 서비스에서 HTTP GET 및 POST 요청을 보내도록 하는 작업은 Windows 스토어 응용 프로그램.IXHR2 작업과 함께 결합 하 여 다른 작업을 작성 하는 코드를 작성할 수 있습니다.예를 들어, 일련의 작업의 일부로 다운로드 작업을 사용할 수 있습니다.다운로드 작업 작업이 취소 되는 경우에 응답할 수 있습니다.

작업에 대한 자세한 내용은 작업 병렬 처리(동시성 런타임)을 참조하십시오.작업에서 사용 하는 방법에 대 한 자세한 내용은 Windows 스토어 응용 프로그램을 참조 하십시오 Asynchronous programming in C++ 및 C++로 Windows 스토어 앱용 비동기 작업 만들기.

이 문서는 처음 만드는 방법을 보여 줍니다 HttpRequest 및 해당 지원 클래스입니다.그 다음이 클래스에서 사용 하는 방법을 보여 줍니다 있는 Windows 스토어 c + + 및 XAML을 사용 하 여 응용 프로그램.

사용 하는 자세한 예제는 HttpReader 클래스는이 문서에서 설명 하는 참조 하십시오 JavaScript 및 C++에서 Windows 스토어 앱, Bing 지도 여정 최적화 프로그램 개발.Ixhr2를 사용 하는 작업을 사용 하지 않는 또 다른 예제를 보려면 Quickstart: Connecting using XML HTTP Request (IXHR2).

팁팁

IXMLHTTPRequest2및 IXMLHTTPRequest2Callback 에서 사용 하기 위해 권장 되는 인터페이스는 Windows 스토어 응용 프로그램.또한 데스크톱 응용 프로그램에서이 예제를 적용할 수 있습니다.

HttpRequest, HttpRequestBuffersCallback, 및 HttpRequestStringCallback 클래스를 정의합니다.

사용 하는 경우는 IXMLHTTPRequest2 HTTP를 통해 웹 요청을 만드는 인터페이스를 구현 하 여는 IXMLHTTPRequest2Callback 서버 응답을 받고 다른 이벤트에 반응 하는 인터페이스입니다.정의 하는이 예제는 HttpRequest 클래스에서 웹 요청을 작성 하 고 HttpRequestBuffersCallback 및 HttpRequestStringCallback 응답을 처리 하는 클래스입니다.HttpRequestBuffersCallback 및 HttpRequestStringCallback 지원 클래스의 HttpRequest 클래스입니다. 에서만 작동의 HttpRequest 클래스에서 응용 프로그램 코드입니다.

GetAsync, PostAsync 메서드는 HttpRequest 클래스를 사용 하면 HTTP GET 및 POST 작업을 다시 시작 합니다.이러한 메서드를 사용은 HttpRequestStringCallback 문자열에 대 한 서버 응답을 읽을 수 있는 클래스입니다.SendAsync 및 ReadAsync 메서드를 사용 하면 콘텐트를 스트리밍할 큰 청크 단위로 합니다.이러한 각 메서드를 반환 합니다. concurrency::task 작업을 나타내도록 합니다.GetAsync 및 PostAsync 메서드 생성 task<std::wstring> 값을 위치는 wstring 일부 서버의 응답을 나타냅니다.SendAsync 및 ReadAsync 메서드 생성 task<void> 값입니다. 보내기 및 읽기 작업을 완료 하면이 작업을 완료 합니다.

IXHR2 인터페이스는 비동기적으로 작동 하기 때문에이 예제를 사용 하 여 concurrency::task_completion_event 콜백 개체 완료 또는 다운로드 작업을 취소 한 후 완료 되는 작업을 만들 수 있습니다.HttpRequest 클래스는 작업 기반 연속이 작업에서 최종 결과 집합을 만듭니다.HttpRequest 클래스 연속 작업 기반 작업을 사용 하 여 이전 작업에서 오류가 생성 되거나 취소 되는 경우에 연속 작업이 실행 되도록 합니다.연속 작업 기반에 대 한 자세한 내용은 참조 하십시오.작업 병렬 처리(동시성 런타임)

취소를 지원 하는 HttpRequest, HttpRequestBuffersCallback, 및 HttpRequestStringCallback 클래스는 취소 토큰을 사용 합니다.HttpRequestBuffersCallback 및 HttpRequestStringCallback 사용 하는 클래스는 concurrency::cancellation_token::register_callback 메서드 작업 완료 이벤트 취소에 응답할 수 있도록 합니다.취소 콜백 다운로드를 중단합니다.취소에 대 한 자세한 정보를 참조 하십시오. PPL에서의 취소.

HttpRequest 클래스를 정의 하려면

  1. 사용할 Visual C++ 빈 응용 프로그램 (XAML) 빈 XAML 응용 프로그램 프로젝트를 만들려면 템플릿을 합니다.이 예제에서는 프로젝트의 이름을 UsingIXHR2.

  2. 프로젝트에 HttpRequest.h 라는 헤더 파일 및 HttpRequest.cpp 라는 소스 파일을 추가 합니다.

  3. Pch.h에서이 코드를 추가 합니다.

    #include <ppltasks.h>
#include <string>
#include <sstream>
#include <wrl.h>
#include <msxml6.h>

  4. Httprequest.h에서이 코드를 추가 합니다.

    #pragma once
#include "pch.h"

inline void CheckHResult(HRESULT hResult)
{
    if (hResult == E_ABORT)
    {
        concurrency::cancel_current_task();
    }
    else if (FAILED(hResult))
    {
        throw Platform::Exception::CreateException(hResult);
    }
}

namespace Web
{

namespace Details
{

// Implementation of IXMLHTTPRequest2Callback used when partial buffers are needed from the response.
// When only the complete response is needed, use HttpRequestStringCallback instead.
class HttpRequestBuffersCallback 
    : public Microsoft::WRL::RuntimeClass<
        Microsoft::WRL::RuntimeClassFlags<Microsoft::WRL::ClassicCom>,
        IXMLHTTPRequest2Callback,
        Microsoft::WRL::FtmBase>
{
public:
    HttpRequestBuffersCallback(IXMLHTTPRequest2* httpRequest, 
        concurrency::cancellation_token ct = concurrency::cancellation_token::none()) :
        request(httpRequest), cancellationToken(ct), responseReceived(false), dataHResult(S_OK), statusCode(200)
    {
        // Register a callback function that aborts the HTTP operation when 
        // the cancellation token is canceled.
        if (cancellationToken != concurrency::cancellation_token::none())
        {
            registrationToken = cancellationToken.register_callback([this]() 
            {
                if (request != nullptr) 
                {
                    request->Abort();
                }
            });
        }

        dataEvent = concurrency::task_completion_event<void>();
    }

    // Called when the HTTP request is being redirected to a new URL.
    IFACEMETHODIMP OnRedirect(IXMLHTTPRequest2*, PCWSTR) 
    {
        return S_OK;
    }

    // Called when HTTP headers have been received and processed.
    IFACEMETHODIMP OnHeadersAvailable(IXMLHTTPRequest2*, DWORD statusCode, PCWSTR reasonPhrase)
    {
        HRESULT hr = S_OK;

        // We must not propagate exceptions back to IXHR2.
        try
        {
            this->statusCode = statusCode;
            this->reasonPhrase = reasonPhrase;

            concurrency::critical_section::scoped_lock lock(dataEventLock);
            dataEvent.set();
        }
        catch (std::bad_alloc&)
        {
            hr = E_OUTOFMEMORY;
        }
        return hr;
    }

    // Called when a portion of the entity body has been received.
    IFACEMETHODIMP OnDataAvailable(IXMLHTTPRequest2*, ISequentialStream* stream)
    {
        HRESULT hr = S_OK;

        // We must not propagate exceptions back to IXHR2.
        try
        {
            // Store a reference on the stream so it can be accessed by the task.
            dataStream = stream;

            // The work must be done as fast as possible, and must not block this thread,
            // for example, waiting on another event object.  Here we simply set an event
            // that can be processed by another thread.
            concurrency::critical_section::scoped_lock lock(dataEventLock);
            dataEvent.set();
        }
        catch (std::bad_alloc&)
        {
            hr = E_OUTOFMEMORY;
        }
        return hr;
    }

    // Called when the entire entity response has been received.
    IFACEMETHODIMP OnResponseReceived(IXMLHTTPRequest2* xhr, ISequentialStream* responseStream)
    {
        responseReceived = true;
        return OnDataAvailable(xhr, responseStream);
    }

    // Called when an error occurs during the HTTP request.
    IFACEMETHODIMP OnError(IXMLHTTPRequest2*, HRESULT hrError) 
    {
        HRESULT hr = S_OK;

        // We must not propagate exceptions back to IXHR2.
        try
        {
            concurrency::critical_section::scoped_lock lock(dataEventLock);
            dataHResult = hrError;
            dataEvent.set();
        }
        catch (std::bad_alloc&)
        {
            hr = E_OUTOFMEMORY;
        }

        return hr;
    }

    // Create a task that completes when data is available, in an exception-safe way.
    concurrency::task<void> CreateDataTask();

    HRESULT GetError() const
    {
        return dataHResult;
    }

    int GetStatusCode() const
    {
        return statusCode;
    }

    std::wstring const& GetReasonPhrase() const
    {
        return reasonPhrase;
    }

    bool IsResponseReceived() const
    {
        return responseReceived;
    }

    // Copy bytes from the sequential stream into the buffer provided until
    // we reach the end of one or the other.
    unsigned int ReadData(
        _Out_writes_(outputBufferSize) byte* outputBuffer,
        unsigned int outputBufferSize);

private:
    ~HttpRequestBuffersCallback()
    {
        // Unregister the callback.
        if (cancellationToken != concurrency::cancellation_token::none())
        {
            cancellationToken.deregister_callback(registrationToken);
        }
    }

    // Signals that the download operation was canceled.
    concurrency::cancellation_token cancellationToken;

    // Used to unregister the cancellation token callback.
    concurrency::cancellation_token_registration registrationToken;

    // The IXMLHTTPRequest2 that processes the HTTP request.
    Microsoft::WRL::ComPtr<IXMLHTTPRequest2> request;

    // Task completion event that is set when data is available or error is triggered.
    concurrency::task_completion_event<void> dataEvent;
    concurrency::critical_section dataEventLock;

    // We cannot store the error obtained from IXHR2 in the dataEvent since any value there is first-writer-wins,
    // whereas we want a subsequent error to override an initial success.
    HRESULT dataHResult;

    // Referenced pointer to the data stream.
    Microsoft::WRL::ComPtr<ISequentialStream> dataStream;

    // HTTP status code and reason returned by the server.
    int statusCode;
    std::wstring reasonPhrase;

    // Whether the response has been completely received.
    bool responseReceived;
};

};

// Utility class for performing asynchronous HTTP requests.
// This class only supports one outstanding request at a time.
class HttpRequest
{
public:
    HttpRequest();

    int GetStatusCode() const
    {
        return statusCode;
    }

    std::wstring const& GetReasonPhrase() const
    {
        return reasonPhrase;
    }

    // Whether the response has been completely received, if using ReadAsync().
    bool IsResponseComplete() const
    {
        return responseComplete;
    }

    // Start an HTTP GET on the specified URI.  The returned task completes once the entire response
    // has been received, and the task produces the HTTP response text.  The status code and reason
    // can be read with GetStatusCode() and GetReasonPhrase().
    concurrency::task<std::wstring> GetAsync(
        Windows::Foundation::Uri^ uri, 
        concurrency::cancellation_token cancellationToken = concurrency::cancellation_token::none());

    // Start an HTTP POST on the specified URI, using a string body.  The returned task produces the 
    // HTTP response text.  The status code and reason can be read with GetStatusCode() and GetReasonPhrase().
    concurrency::task<std::wstring> PostAsync(
        Windows::Foundation::Uri^ uri,
        PCWSTR contentType,
        IStream* postStream,
        uint64 postStreamSizeToSend,
        concurrency::cancellation_token cancellationToken = concurrency::cancellation_token::none());

    // Start an HTTP POST on the specified URI, using a stream body.  The returned task produces the
    // HTTP response text.  The status code and reason can be read with GetStatusCode() and GetReasonPhrase().
    concurrency::task<std::wstring> PostAsync(
        Windows::Foundation::Uri^ uri,
        const std::wstring& str,
        concurrency::cancellation_token cancellationToken = concurrency::cancellation_token::none());

    // Send a request but don't return the response.  Instead, let the caller read it with ReadAsync().
    concurrency::task<void> SendAsync(
        const std::wstring& httpMethod,
        Windows::Foundation::Uri^ uri,
        concurrency::cancellation_token cancellationToken = concurrency::cancellation_token::none());

    // Read a chunk of data from the HTTP response, up to a specified length or until we reach the end
    // of the response, and store the value in the provided buffer.  This is useful for large content,
    // enabling the streaming of the result.
    concurrency::task<void> ReadAsync(
        Windows::Storage::Streams::IBuffer^ readBuffer,
        unsigned int offsetInBuffer,
        unsigned int requestedBytesToRead);

    static void CreateMemoryStream(IStream **stream);

private:
    // Start a download of the specified URI using the specified method.  The returned task produces the
    // HTTP response text.  The status code and reason can be read with GetStatusCode() and GetReasonPhrase().
    concurrency::task<std::wstring> DownloadAsync(
        PCWSTR httpMethod,
        PCWSTR uri, 
        concurrency::cancellation_token cancellationToken,
        PCWSTR contentType,
        IStream* postStream,
        uint64 postStreamBytesToSend);

    // Referenced pointer to the callback, if using SendAsync/ReadAsync.
    Microsoft::WRL::ComPtr<Details::HttpRequestBuffersCallback> buffersCallback;

    int statusCode;
    std::wstring reasonPhrase;

    // Whether the response has been completely received, if using ReadAsync().
    bool responseComplete;
};

};

  5. Httprequest.cpp에서이 코드를 추가 합니다.

    #include "pch.h"
#include "HttpRequest.h"
#include <robuffer.h>
#include <shcore.h>

using namespace concurrency;
using namespace Microsoft::WRL;
using namespace Platform;
using namespace std;
using namespace Web;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;

// Implementation of IXMLHTTPRequest2Callback used when only the complete response is needed.
// When processing chunks of response data as they are received, use HttpRequestBuffersCallback instead.
class HttpRequestStringCallback 
    : public RuntimeClass<RuntimeClassFlags<ClassicCom>, IXMLHTTPRequest2Callback, FtmBase>
{
public:
    HttpRequestStringCallback(IXMLHTTPRequest2* httpRequest, 
        cancellation_token ct = concurrency::cancellation_token::none()) :
        request(httpRequest), cancellationToken(ct)
    {
        // Register a callback function that aborts the HTTP operation when 
        // the cancellation token is canceled.
        if (cancellationToken != cancellation_token::none())
        {
            registrationToken = cancellationToken.register_callback([this]() 
            {
                if (request != nullptr) 
                {
                    request->Abort();
                }
            });
        }
    }

    // Called when the HTTP request is being redirected to a new URL.
    IFACEMETHODIMP OnRedirect(IXMLHTTPRequest2*, PCWSTR) 
    {
        return S_OK;
    }

    // Called when HTTP headers have been received and processed.
    IFACEMETHODIMP OnHeadersAvailable(IXMLHTTPRequest2*, DWORD statusCode, PCWSTR reasonPhrase)
    {
        HRESULT hr = S_OK;

        // We must not propagate exceptions back to IXHR2.
        try
        {
            this->statusCode = statusCode;
            this->reasonPhrase = reasonPhrase;
        }
        catch (std::bad_alloc&)
        {
            hr = E_OUTOFMEMORY;
        }

        return hr;
    }

    // Called when a portion of the entity body has been received.
    IFACEMETHODIMP OnDataAvailable(IXMLHTTPRequest2*, ISequentialStream*)
    {
        return S_OK;
    }

    // Called when the entire entity response has been received.
    IFACEMETHODIMP OnResponseReceived(IXMLHTTPRequest2*, ISequentialStream* responseStream)
    {
        wstring wstr;
        HRESULT hr = ReadUtf8StringFromSequentialStream(responseStream, wstr);

        // We must not propagate exceptions back to IXHR2.
        try
        {
            completionEvent.set(make_tuple<HRESULT, wstring>(move(hr), move(wstr)));
        }
        catch (std::bad_alloc&)
        {
            hr = E_OUTOFMEMORY;
        }

        return hr;
    }

    // Simulate the functionality of DataReader.ReadString().
    // This is needed because DataReader requires IRandomAccessStream and this
    // code has an ISequentialStream that does not have a conversion to IRandomAccessStream like IStream does.
    HRESULT ReadUtf8StringFromSequentialStream(ISequentialStream* readStream, wstring& str)
    {
        // Convert the response to Unicode wstring.
        HRESULT hr;

        // Holds the response as a Unicode string.
        wstringstream ss;

        while (true)
        {
            ULONG cb;
            char buffer[4096];

            // Read the response as a UTF-8 string.  Since UTF-8 characters are 1-4 bytes long,
            // we need to make sure we only read an integral number of characters.  So we'll
            // start with 4093 bytes.
            hr = readStream->Read(buffer, sizeof(buffer) - 3, &cb);
            if (FAILED(hr) || (cb == 0))
            {
                break; // Error or no more data to process, exit loop.
            }

            if (cb == sizeof(buffer) - 3)
            {
                ULONG subsequentBytesRead;
                unsigned int i, cl;

                // Find the first byte of the last UTF-8 character in the buffer.
                for (i = cb - 1; (i >= 0) && ((buffer[i] & 0xC0) == 0x80); i--);

                // Calculate the number of subsequent bytes in the UTF-8 character.
                if (((unsigned char)buffer[i]) < 0x80)
                {
                    cl = 1;
                }
                else if (((unsigned char)buffer[i]) < 0xE0)
                {
                    cl = 2;
                }
                else if (((unsigned char)buffer[i]) < 0xF0)
                {
                    cl = 3;
                }
                else
                {
                    cl = 4;
                }

                // Read any remaining bytes.
                if (cb < i + cl)
                {
                    hr = readStream->Read(buffer + cb, i + cl - cb, &subsequentBytesRead);
                    if (FAILED(hr))
                    {
                        break; // Error, exit loop.
                    }
                    cb += subsequentBytesRead;
                }
            }

            // First determine the size required to store the Unicode string.
            int const sizeRequired = MultiByteToWideChar(CP_UTF8, 0, buffer, cb, nullptr, 0);
            if (sizeRequired == 0)
            {
                // Invalid UTF-8.
                hr = HRESULT_FROM_WIN32(GetLastError());
                break;
            }
            unique_ptr<char16[]> wstr(new(std::nothrow) char16[sizeRequired + 1]);
            if (wstr.get() == nullptr)
            {
                hr = E_OUTOFMEMORY;
                break;
            }

            // Convert the string from UTF-8 to UTF-16LE.  This can never fail, since
            // the previous call above succeeded.
            MultiByteToWideChar(CP_UTF8, 0, buffer, cb, wstr.get(), sizeRequired);
            wstr[sizeRequired] = L'\0'; // Terminate the string.
            ss << wstr.get(); // Write the string to the stream.
        }

        str = SUCCEEDED(hr) ? ss.str() : wstring();
        return (SUCCEEDED(hr)) ? S_OK : hr; // Don't return S_FALSE.
    }

    // Called when an error occurs during the HTTP request.
    IFACEMETHODIMP OnError(IXMLHTTPRequest2*, HRESULT hrError) 
    {
        HRESULT hr = S_OK;

        // We must not propagate exceptions back to IXHR2.
        try
        {
            completionEvent.set(make_tuple<HRESULT, wstring>(move(hrError), wstring()));
        }
        catch (std::bad_alloc&)
        {
            hr = E_OUTOFMEMORY;
        }

        return hr;
    }

    // Retrieves the completion event for the HTTP operation.
    task_completion_event<tuple<HRESULT, wstring>> const& GetCompletionEvent() const
    {
        return completionEvent; 
    }

    int GetStatusCode() const
    {
        return statusCode;
    }

    wstring GetReasonPhrase() const
    {
        return reasonPhrase;
    }

private:
    ~HttpRequestStringCallback()
    {
        // Unregister the callback.
        if (cancellationToken != cancellation_token::none())
        {
            cancellationToken.deregister_callback(registrationToken);
        }
    }

    // Signals that the download operation was canceled.
    cancellation_token cancellationToken;

    // Used to unregister the cancellation token callback.
    cancellation_token_registration registrationToken;

    // The IXMLHTTPRequest2 that processes the HTTP request.
    ComPtr<IXMLHTTPRequest2> request;

    // Task completion event that is set when the 
    // download operation completes.
    task_completion_event<tuple<HRESULT, wstring>> completionEvent;

    int statusCode;
    wstring reasonPhrase;
};

// Copy bytes from the sequential stream into the buffer provided until
// we reach the end of one or the other.
unsigned int Web::Details::HttpRequestBuffersCallback::ReadData(
    _Out_writes_(outputBufferSize) byte* outputBuffer,
    unsigned int outputBufferSize)
{
    // Lock the data event while doing the read, to ensure that any bytes we don't read will
    // result in the correct event getting triggered.
    concurrency::critical_section::scoped_lock lock(dataEventLock);

    ULONG bytesRead;
    CheckHResult(dataStream.Get()->Read(outputBuffer, outputBufferSize, &bytesRead));
    if (bytesRead < outputBufferSize)
    {
        // We need to reset the data event, which we can only do by creating a new one.
        dataEvent = task_completion_event<void>();
    }

    return bytesRead;
}

// Create a task that completes when data is available, in an exception-safe way.
task<void> Web::Details::HttpRequestBuffersCallback::CreateDataTask()
{
    concurrency::critical_section::scoped_lock lock(dataEventLock);
    return create_task(dataEvent, cancellationToken);
}

HttpRequest::HttpRequest() : responseComplete(true), statusCode(200)
{
}

// Start a download of the specified URI using the specified method.  The returned task produces the
// HTTP response text.  The status code and reason can be read with GetStatusCode() and GetReasonPhrase().
task<wstring> HttpRequest::DownloadAsync(PCWSTR httpMethod, PCWSTR uri, cancellation_token cancellationToken,
    PCWSTR contentType, IStream* postStream, uint64 postStreamSizeToSend)
{
    // Create an IXMLHTTPRequest2 object.
    ComPtr<IXMLHTTPRequest2> xhr;
    CheckHResult(CoCreateInstance(CLSID_XmlHttpRequest, nullptr, CLSCTX_INPROC, IID_PPV_ARGS(&xhr)));

    // Create callback.
    auto stringCallback = Make<HttpRequestStringCallback>(xhr.Get(), cancellationToken);
    CheckHResult(stringCallback ? S_OK : E_OUTOFMEMORY);

    auto completionTask = create_task(stringCallback->GetCompletionEvent());

    // Create a request.
    CheckHResult(xhr->Open(httpMethod, uri, stringCallback.Get(), nullptr, nullptr, nullptr, nullptr));

    if (postStream != nullptr && contentType != nullptr)
    {
        CheckHResult(xhr->SetRequestHeader(L"Content-Type", contentType));
    }

    // Send the request.
    CheckHResult(xhr->Send(postStream, postStreamSizeToSend));

    // Return a task that completes when the HTTP operation completes. 
    // We pass the callback to the continuation because the lifetime of the 
    // callback must exceed the operation to ensure that cancellation 
    // works correctly.
    return completionTask.then([this, stringCallback](tuple<HRESULT, wstring> resultTuple)
    {
        // If the GET operation failed, throw an Exception.
        CheckHResult(std::get<0>(resultTuple));

        statusCode = stringCallback->GetStatusCode();
        reasonPhrase = stringCallback->GetReasonPhrase();

        return std::get<1>(resultTuple);
    });
}

// Start an HTTP GET on the specified URI.  The returned task completes once the entire response
// has been received, and the task produces the HTTP response text.  The status code and reason
// can be read with GetStatusCode() and GetReasonPhrase().
task<wstring> HttpRequest::GetAsync(Uri^ uri, cancellation_token cancellationToken)
{
    return DownloadAsync(L"GET",
                         uri->AbsoluteUri->Data(),
                         cancellationToken,
                         nullptr,
                         nullptr,
                         0);
}

void HttpRequest::CreateMemoryStream(IStream **stream)
{
    auto randomAccessStream = ref new Windows::Storage::Streams::InMemoryRandomAccessStream();
    CheckHResult(CreateStreamOverRandomAccessStream(randomAccessStream, IID_PPV_ARGS(stream)));
}

// Start an HTTP POST on the specified URI, using a string body.  The returned task produces the
// HTTP response text.  The status code and reason can be read with GetStatusCode() and GetReasonPhrase().
task<wstring> HttpRequest::PostAsync(Uri^ uri, const wstring& body, cancellation_token cancellationToken)
{
    int length = 0;
    ComPtr<IStream> postStream;
    CreateMemoryStream(&postStream);

    if (body.length() > 0)
    {
        // Get the required buffer size.
        int size = WideCharToMultiByte(CP_UTF8,                         // UTF-8
                                       0,                               // Conversion type
                                       body.c_str(),                    // Unicode string to convert
                                       static_cast<int>(body.length()), // Size
                                       nullptr,                         // Output buffer
                                       0,                               // Output buffer size
                                       nullptr,
                                       nullptr);
        CheckHResult((size != 0) ? S_OK : HRESULT_FROM_WIN32(GetLastError()));

        std::unique_ptr<char[]> tempData(new char[size]);
        length = WideCharToMultiByte(CP_UTF8,                         // UTF-8
                                     0,                               // Conversion type
                                     body.c_str(),                    // Unicode string to convert
                                     static_cast<int>(body.length()), // Size
                                     tempData.get(),                  // Output buffer
                                     size,                            // Output buffer size
                                     nullptr,
                                     nullptr);
        CheckHResult((length != 0) ? S_OK : HRESULT_FROM_WIN32(GetLastError()));
        CheckHResult(postStream->Write(tempData.get(), length, nullptr));
    }

    return DownloadAsync(L"POST",
                         uri->AbsoluteUri->Data(),
                         cancellationToken,
                         L"text/plain;charset=utf-8",
                         postStream.Get(),
                         length);
}

// Start an HTTP POST on the specified URI, using a stream body.  The returned task produces the
// HTTP response text.  The status code and reason can be read with GetStatusCode() and GetReasonPhrase().
task<wstring> HttpRequest::PostAsync(Uri^ uri, PCWSTR contentType, IStream* postStream,
    uint64 postStreamSizeToSend, cancellation_token cancellationToken)
{
    return DownloadAsync(L"POST",
                         uri->AbsoluteUri->Data(),
                         cancellationToken,
                         contentType,
                         postStream,
                         postStreamSizeToSend);
}

// Send a request but don't return the response.  Instead, let the caller read it with ReadAsync().
task<void> HttpRequest::SendAsync(const wstring& httpMethod, Uri^ uri, cancellation_token cancellationToken)
{
    // Create an IXMLHTTPRequest2 object.
    ComPtr<IXMLHTTPRequest2> xhr;
    CheckHResult(CoCreateInstance(CLSID_XmlHttpRequest, nullptr, CLSCTX_INPROC, IID_PPV_ARGS(&xhr)));

    // Create callback.
    buffersCallback = Make<Web::Details::HttpRequestBuffersCallback>(xhr.Get(), cancellationToken);
    CheckHResult(buffersCallback ? S_OK : E_OUTOFMEMORY);

    ComPtr<IXMLHTTPRequest2Callback> xhrCallback;
    CheckHResult(buffersCallback.As(&xhrCallback));

    // Open and send the request.
    CheckHResult(xhr->Open(httpMethod.c_str(),
                           uri->AbsoluteUri->Data(),
                           xhrCallback.Get(),
                           nullptr,
                           nullptr,
                           nullptr,
                           nullptr));

    responseComplete = false;

    CheckHResult(xhr->Send(nullptr, 0));

    // Return a task that completes when the HTTP operation completes.
    // Since buffersCallback holds a reference on the callback, the lifetime of the callback will exceed
    // the operation and ensure that cancellation works correctly.
    return buffersCallback->CreateDataTask().then([this]()
    {
        CheckHResult(buffersCallback->GetError());

        statusCode = buffersCallback->GetStatusCode();
        reasonPhrase = buffersCallback->GetReasonPhrase();
    });
}

// Read a chunk of data from the HTTP response, up to a specified length or until we reach the end
// of the response, and store the value in the provided buffer.  This is useful for large content,
// enabling the streaming of the result.
task<void> HttpRequest::ReadAsync(Windows::Storage::Streams::IBuffer^ readBuffer, unsigned int offsetInBuffer,
    unsigned int requestedBytesToRead)
{
    if (offsetInBuffer + requestedBytesToRead > readBuffer->Capacity)
    {
        throw ref new InvalidArgumentException();
    }

    // Return a task that completes when a read completes. 
    // We pass the callback to the continuation because the lifetime of the 
    // callback must exceed the operation to ensure that cancellation 
    // works correctly.
    return buffersCallback->CreateDataTask().then([this, readBuffer, offsetInBuffer, requestedBytesToRead]()
    {
        CheckHResult(buffersCallback->GetError());

        // Get a pointer to the location to copy data into.
        ComPtr<IBufferByteAccess> bufferByteAccess;
        CheckHResult(reinterpret_cast<IUnknown*>(readBuffer)->QueryInterface(IID_PPV_ARGS(&bufferByteAccess)));
        byte* outputBuffer; // Returned internal pointer, do not free this value.
        CheckHResult(bufferByteAccess->Buffer(&outputBuffer));

        // Copy bytes from the sequential stream into the buffer provided until
        // we reach the end of one or the other.
        readBuffer->Length = buffersCallback->ReadData(outputBuffer + offsetInBuffer, requestedBytesToRead);
        if (buffersCallback->IsResponseReceived() && (readBuffer->Length < requestedBytesToRead))
        {
            responseComplete = true;
        }
    });
}

HttpRequest 클래스에서 사용 하는 Windows 스토어 응용 프로그램

이 절을 사용 하는 방법을 설명의 HttpRequest 클래스는 Windows 스토어 응용 프로그램입니다.응용 프로그램 GET 및 POST 작업을 수행 하는 단추 명령 및 현재 작업을 취소 하는 단추 명령 URL 리소스를 정의 하는 입력된 상자를 제공 합니다.

HttpRequest 클래스를 사용 합니다.

  1. Mainpage.xaml에 정의 된 StackPanel 은 다음과 같이 요소.

    <StackPanel HorizontalAlignment="Left" Width="440"
            Background="{StaticResource ApplicationPageBackgroundThemeBrush}">
    <TextBox x:Name="InputTextBox" TextWrapping="Wrap" 
             Text="https://www.fourthcoffee.com/"/>
    <StackPanel Orientation="Horizontal">
        <Button x:Name="GetButton" Content="Get" Background="Green" 
            Click="GetButton_Click"/>
        <Button x:Name="PostButton" Content="Post" Background="Blue" 
            Click="PostButton_Click"/>
        <Button x:Name="CancelButton" Content="Cancel" Background="Red"
            IsEnabled="False" Click="CancelButton_Click"/>
        <ProgressRing x:Name="ResponseProgressRing" />
    </StackPanel>
    <TextBlock x:Name="ResponseTextBlock" TextWrapping="Wrap"/>
</StackPanel>

  2. Mainpage.xaml.h에서 추가 #include 지시문:

    #include "HttpRequest.h"

  3. Mainpage.xaml.h에서 이러한 추가 private 멤버 변수에 MainPage 클래스:

    // Produces HTTP requets.
Web::HttpRequest m_httpRequest;
// Enables us to cancel the active HTTP request.
concurrency::cancellation_token_source m_cancelHttpRequestSource;

  4. Mainpage.xaml.h에 선언 된 private 메서드 ProcessHttpRequest.

    // Displays the result of the provided HTTP request on the UI.
void ProcessHttpRequest(concurrency::task<std::wstring> httpRequest);

  5. Mainpage.xaml.cpp에서 이러한 추가 using 문.

    using namespace concurrency;
using namespace std;
using namespace Web;

  6. Mainpage.xaml.cpp에 구현에 GetButton_Click, PostButton_Click, 및 CancelButton_Click 메서드는 MainPage 클래스.

    void MainPage::GetButton_Click(Object^ sender, RoutedEventArgs^ e)
{
    // Create a new cancellation token source for the web request.
    m_cancelHttpRequestSource = cancellation_token_source();

    // Set up the GET request parameters.
    auto uri = ref new Uri(InputTextBox->Text);
    auto token = m_cancelHttpRequestSource.get_token();

    // Send the request and then update the UI.
    ProcessHttpRequest(m_httpRequest.GetAsync(uri, token));
}

void MainPage::PostButton_Click(Object^ sender, RoutedEventArgs^ e)
{
    // Create a new cancellation token source for the web request.
    m_cancelHttpRequestSource = cancellation_token_source();

    // Set up the POST request parameters.
    auto uri = ref new Uri(InputTextBox->Text);
    wstring postData(L"This is sample POST data.");
    auto token = m_cancelHttpRequestSource.get_token();

    // Send the request and then update the UI.
    ProcessHttpRequest(m_httpRequest.PostAsync(uri, postData, token));
}

void MainPage::CancelButton_Click(Object^ sender, RoutedEventArgs^ e)
{
    // Disable the Cancel button.
    // It will be re-enabled during the next web request.
    CancelButton->IsEnabled = false;

    // Initiate cancellation.
    m_cancelHttpRequestSource.cancel();
}
    팁팁

    전달할 응용 프로그램 취소에 대 한 지원이 필요 하지 않은 경우 concurrency::cancellation_token:: 없음 에 HttpRequest::GetAsync 및 HttpRequest::PostAsync 메서드.

  7. Mainpage.xaml.cpp에 구현 된 MainPage::ProcessHttpRequest 메서드.

    // Displays the result of the provided HTTP request on the UI.
void MainPage::ProcessHttpRequest(task<wstring> httpRequest)
{
    // Enable only the Cancel button.
    GetButton->IsEnabled = false;
    PostButton->IsEnabled = false;
    CancelButton->IsEnabled = true;

    // Clear the previous response and start the progress ring.
    ResponseTextBlock->Text = "";
    ResponseProgressRing->IsActive = true;

    // Create a continuation that shows the results on the UI.
    // The UI must be updated on the ASTA thread. 
    // Therefore, schedule the continuation to run on the current context.
    httpRequest.then([this](task<wstring> previousTask)
    {
        try
        {
            //
            // Show the result on the UI.

            wstring response = previousTask.get();
            if (m_httpRequest.GetStatusCode() == 200)
            {
                // The request succeeded. Show the response.
                ResponseTextBlock->Text = ref new String(response.c_str());
            }
            else
            {
                // The request failed. Show the status code and reason.
                wstringstream ss;
                ss << L"The server returned "
                   << m_httpRequest.GetStatusCode()
                   << L" ("
                   << m_httpRequest.GetReasonPhrase()
                   << L')';
                ResponseTextBlock->Text = ref new String(ss.str().c_str());
            }
        }
        catch (const task_canceled&)
        {
            // Indicate that the operation was canceled.
            ResponseTextBlock->Text = "The operation was canceled";
        }
        catch (Exception^ e)
        {
            // Indicate that the operation failed.
            ResponseTextBlock->Text = "The operation failed";

            // TODO: Handle the error further.
            (void)e;
        }

        // Enable the Get and Post buttons.
        GetButton->IsEnabled = true;
        PostButton->IsEnabled = true;
        CancelButton->IsEnabled = false;

        // Stop the progress ring.
        ResponseProgressRing->IsActive = false;

    }, task_continuation_context::use_current());
}

  8. 프로젝트 속성에서에서 링커, 입력, 지정 shcore.lib 및 msxml6.lib.

실행 중인 응용 프로그램은 다음과 같습니다.

Windows 스토어 앱 실행

다음 단계

동시성 런타임 연습

참고 항목

참조

작업 클래스(동시성 런타임)

task_completion_event 클래스

개념

작업 병렬 처리(동시성 런타임)

PPL에서의 취소

C++로 Windows 스토어 앱용 비동기 작업 만들기

기타 리소스

Asynchronous programming in C++

Quickstart: Connecting using XML HTTP Request (IXHR2)

IXMLHTTPRequest2

IXMLHTTPRequest2Callback