OID_DOT11_AUTO_CONFIG_ENABLED (Compact 2013)

아티클
07/31/2017

3/26/2014

When set, the OID_DOT11_AUTO_CONFIG_ENABLED object identifier (OID) requests that the miniport driver set the value of the Extensible Station (ExtSTA) msDot11AutoConfigEnabled management information base (MIB) object to the specified value.

When queried, this OID requests that the miniport driver return the value of the msDot11AutoConfigEnabled MIB object.

The msDot11AutoConfigEnabled MIB object specifies the current settings for the following automatic configuration modes:

Automatic media access control (MAC) configuration
When automatic MAC configuration is enabled, the 802.11 station manages the configuration of the MAC and can fail set requests that would change MAC related parameters.

Automatic PHY configuration
When automatic PHY configuration is enabled, the 802.11 station manages the configuration of the PHY and can fail set requests that would change PHY related parameters.

The data type for OID_DOT11_AUTO_CONFIG_ENABLED is a ULONG value, with the automatic configuration settings that are defined through the following bitmask:

DOT11_PHY_AUTO_CONFIG_ENABLED_FLAG
If this bit is set, the miniport driver has enabled automatic PHY configuration.

DOT11_MAC_AUTO_CONFIG_ENABLED_FLAG
If this bit is set, the miniport driver has enabled automatic MAC configuration.

The default for the msDot11AutoConfigEnabled MIB object has the following flags set:

DOT11_PHY_AUTO_CONFIG_ENABLED_FLAG
DOT11_MAC_AUTO_CONFIG_ENABLED_FLAG

The miniport driver must set this MIB object to its default if any of the following occurs:

The miniport driver’s MiniportInitializeEx function is called.
A method request of OID_DOT11_RESET_REQUEST is made to reset the media access control (MAC) layer of the 802.11 station and the bSetDefaultMIB member of the DOT11_RESET_REQUEST structure is TRUE.

Requirements

Header

windot11.h

다음을 통해 공유

OID_DOT11_AUTO_CONFIG_ENABLED (Compact 2013)

Requirements

See Also

Reference

추가 리소스