Windows Tablet Test (System)

아티클
02/27/2017

This manual test tests the resume time for systems that support the Connected Standby state.

Test details

Associated requirements	System.Client.Tablet.ColdBootLatency See the system hardware requirements.
Platforms	Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86
Expected run time	~1 minutes
Categories	Certification
Type	Manual

Running the test

Before you run the test, complete the test setup as described in the test requirements: System Client Testing Prerequisites.

The system should appear to immediately awaken upon a resume. Together with the display, touch is the primary means by which this sense is communicated to the user.

To perform this test, put the computer into the Connected Standby state, and then resume. When the display is activated, touch the screen immediately and verify that the touch screen responds within a reasonable time. You should observe no visual delay.

After you accomplish this task, return to Windows tablet test (system) and select Yes if the system passed the requirement, or select No if the touch screen did not respond immediately.