다음을 통해 공유


Build a Classic ASP Website on IIS

 

Applies To: Windows Server 2012 R2, Windows Server 2012

This document guides you through installing IIS and configuring a classic ASP website. Classic ASP is a server-side scripting environment that you can use to create and run dynamic web applications. With ASP, you can combine HTML pages, script commands, and COM components to create interactive web pages that are easy to develop and modify. Classic ASP is the predecessor to ASP.NET, but it is still in wide use today.

The Classic ASP server configuration adds IIS modules for ASP and ISAPI extensions to the default IIS installation.

In this document

Prerequisites

This guide was written for, and tested on, the following operating systems:

  1. Windows Server® 2012

  2. Windows® 8

Step 1: Install the IIS Web Server

You can use the Web Platform Installer (Web PI) to install IIS, and applications that run on IIS. Because the Web PI installs the latest versions of available Web Platform offerings, with just a few simple clicks you can download and install any new tools or updates. To learn more about the Web PI, see Learn more and install the Web PI.

You can also perform this procedure by using the Windows user interface (UI) or from a command line.

To install IIS on Windows Server 2012 by using the UI

  1. On the Start page, click the Server Manager tile, and then click OK.

  2. In Server Manager, select Dashboard, and click Add roles and features.

  3. In the Add Roles and Features Wizard, on the Before You Begin page, click Next.

  4. On the Select Installation Type page, select Role-based or Feature-based Installation and click Next

  5. On the Select Destination Server page, select Select a server from the server pool, select your server, and click Next.

  6. On the Select Server Roles page, select Web Server (IIS), and then click Next.

  7. On the Select Features page, note the preselected features that are installed by default, and then select the following additional role services:

    • ASP

    • ISAPI Extensions

  8. Click Next.

  9. On the Web Server Role (IIS) page, click Next.

  10. On the Select Role Services page, note the preselected role services that are installed by default, and then click Next.

    Note

    You only have to install the IIS 8 default role services for a static-content web server.

  11. On the Confirm Installation Selections page, confirm your selections, and then click Install.

  12. On the Installation Progress page, confirm that your installation of the Web Server (IIS) role and required role services completed successfully, and then click Close.

  13. To verify that IIS installed successfully, type the following into a web browser:

    https://localhost

    You should see the default IIS Welcome page.

To install IIS on Windows 8 by using the UI

  1. On the Start page, type Control Panel, and then click the Control Panel icon in the search results.

  2. In Control Panel, click Programs, and then click Turn Windows features on or off.

  3. In the Windows Features dialog box, click Internet Information Services, note the preselected features that are installed by default, and then select the following additional role services:

    • ASP

    • ISAPI Extensions

  4. Click OK.

  5. To verify that IIS installed successfully, type the following into a web browser:

    https://localhost

    You see the default IIS Welcome page.

To Install IIS by using the command line

  • Type the following command at a command prompt or into a script:

    Start /w pkgmgr /iu:IIS-WebServerRole;IIS-WebServer;IIS-CommonHttpFeatures;IIS-StaticContent;IIS-DefaultDocument;IIS-DirectoryBrowsing;IIS-HttpErrors;IIS-ApplicationDevelopment;IIS-ASP;IIS-ISAPIExtensions;IIS-HealthAndDiagnostics;IIS-HttpLogging;IIS-LoggingLibraries;IIS-RequestMonitor;IIS-Security;IIS-RequestFiltering;IIS-HttpCompressionStatic;IIS-WebServerManagementTools;IIS-ManagementConsole;WAS-WindowsActivationService;WAS-ProcessModel;WAS-NetFxEnvironment;WAS-ConfigurationAPI

Step 2: Add a Classic ASP Website

You can perform this procedure by using the user interface (UI), by running Appcmd.exe commands in a command-line window, by editing configuration files directly, or by writing WMI scripts.

To add a website by using the UI

  1. Open IIS Manager.

    • For Windows Server 2012, on the Start page click the Server Manager tile, and then click OK. On the Server Manager Dashboard, click the Tools menu, and then click Internet Information Services (IIS) Manager.

    • For Windows 8, on the Start page type Control Panel, and then click the Control Panel icon in the search results. On the Control Panel screen, click System and Security, click Administrative Tools, and then click Internet Information Services (IIS) Manager.

  2. In the Connections pane, right-click the Sites node in the tree, and then click Add Website.

  3. In the Add Website dialog box, type a friendly name for your website in the Site name box.

  4. If you want to select a different application pool than the one listed in the Application Pool box, click Select. In the Select Application Pool dialog box, select an application pool from the Application Pool list and then click OK.

  5. In the Physical path box, type the physical path of the Web site's folder, or click the browse button (...) to navigate the file system to find the folder.

  6. If the physical path that you entered in step 5 is to a remote share, click Connect as to specify credentials that have permission to access the path. If you do not use specific credentials, select the Application user (pass-through authentication) option in the Connect As dialog box.

  7. Select the protocol for the Web site from the Type list.

  8. The default value in the IP address box is All Unassigned. If you must specify a static IP address for the Web site, type the IP address in the IP address box.

  9. Type a port number in the Port text box.

  10. Optionally, type a host header name for the Web site in the Host Header box.

  11. If you do not have to make any changes to the site, and you want the Web site to be immediately available, select the Start Web site immediately check box.

  12. Click OK.

To add a website by using the command line

  • Use the following syntax at the command prompt or in a script:

    Note

    For this syntax to work, you either must be in the following directory, or have the directory in your path: %windir%\system32\inetsrv

    **appcmd add site /name:**string **/id:**uint **/physicalPath:**string **/bindings:string **

    The variable name string is the name, and the variable id uint is the unsigned integer that you want to assign to the site. The variables name string and id uint are the only variables that are required when you add a site in Appcmd.exe.

    Note

    When you add a site without specifying the values for the bindings and physicalPath attributes, the site will not be able to start.

    The variable physicalPath string is the path of the site content in the file system.

    The variable bindings string contains information that is used to access the site, and it should be in the form of protocol**/IP_address:port:**host_header. For example, a web site binding is the combination of protocol, IP address, port, and host header. A binding of http/*:85: enables a web site to listen for HTTP requests on port 85 for all IP addresses and domain names (also known as host headers or host names). On the other hand, a binding of http/*:85:marketing.contoso.com enables a web site to listen for HTTP requests on port 85 for all IP addresses and the domain name marketing.contoso.com.

    To add a web site named contoso with an ID of 2 that has content in c:\contoso, and that listens for HTTP requests on port 85 for all IP addresses and a domain name of marketing.contoso.com, type the following at the command prompt, and then press ENTER:

    appcmd add site /name:contoso /id:2 /physicalPath:c:\contoso **/bindings:http/*:85:marketing.contoso.com **

Step 3: Edit ASP Application Settings

IIS 8 provides default settings for ASP applications, but you can change those settings as needed. For example, you can enable client-side debugging on a test server to aide in troubleshooting issues during a test pass.

To edit ASP application settings by using the UI

  1. Open IIS Manager and navigate to the level you want to manage.

  2. In Features View, double-click ASP.

  3. On the ASP page, edit settings as desired.

  4. When finished, click Apply in the Actions pane.

To edit ASP application settings by using the command line

  • Specify default character set

    To specify the default character set for an application, use the following syntax:

    **appcmd set config /section:asp /codePage:**integerRange

    The variable integerRange is the default character set. For example, to set the code page to a Latin character set used in American English and many European alphabets, type the following at the command prompt, and then press Enter:

    **appcmd set config /section:asp /codePage:**1252

  • Enable or disable buffering

    To enable or disable buffering of ASP application output, use the following syntax:

    appcmd set config /section:asp /bufferingOn:True|False

    True enables buffering whereas False disables buffering. The default value is True.

  • Enable or disable HTTP 1.1 chunked transfer encoding

    To enable HTTP 1.1 chunked transfer encoding for the World Wide Web publishing service, use the following syntax:

    appcmd set config /section:asp /enableChunkedEncoding:True|False

    True enables HTTP 1.1 chunked transfer encoding whereas False disables HTTP 1.1 chunked transfer encoding. The default value is True.

  • Enable or disable HTML fallback

    To enable or disable HTML fallback, use the following syntax:

    appcmd set config /section:asp /enableASPHTMLFallback:True|False

    True causes an .htm file that has the same name as the requested .asp file, if it exists, to be sent instead of the .asp file if the request is rejected because of a full request queue. The default value is True.

  • Enable or disable parent paths

    To enable or disable paths relative to the current directory or above the current directory, use the following syntax:

    appcmd set config /section:asp /enableParentPaths:True|False

    True sets ASP pages to allow paths relative to the current directory or above the current directory. The default value is True.

  • Set client connection test interval

    To set a time interval after which ASP will check to see whether the client is still connected before executing a request, use the following syntax:

    **appcmd set config /section:asp /queueConnectionTestTime:**timeSpan

    The variable timeSpan sets the time interval (hh:mm:ss) after which ASP checks to see whether the client is still connected before executing a request. The default value is 00:00:03.

  • Set maximum requesting entity body limit

    To specify the maximum number of bytes allowed in the entity body of an ASP request, use the following syntax:

    **appcmd set config /section:asp /maxRequestEntityAllowed:**int

    The variable int represents the maximum number of bytes allowed in the body of an ASP request. The default value is 200000 bytes.

  • Set request queue length

    To specify the maximum number of concurrent ASP requests allowed into the queue, use the following syntax:

    **appcmd set config /section:asp /requestQueueMax:**int

    The variable int represents the maximum number of concurrent ASP requests that are allowed into the request queue. The default value is 3000.

  • Set request queue time-out

    To specify the period that an ASP request can wait in the request queue, use the following syntax:

    **appcmd set config /section:asp /queueTimeout:**timeSpan

    The variable timeSpan represents the maximum time (hh:mm:ss) that an ASP request can wait in the request queue. The default value is 00:00:00.

  • Specify response buffering limit

    To control the maximum number of bytes that an ASP page can write to the response buffer before a flush occurs, use the following syntax:

    **appcmd set config /section:asp /bufferingLimit:**int

    The variable int represents the maximum size, in bytes, of the ASP buffer. The default value is 4194304 bytes.

  • Set script time-out

    To specify the default length of time that ASP pages let a script run before terminating the script and writing an event to the Windows Event Log, use the following syntax:

    **appcmd set config /section:asp /scriptTimeout:**timeSpan

    The variable timeSpan represents the maximum time (hh:mm:ss) that an ASP request can run before an event is written to the Windows Event Log. The default value is 00:01:30.

  • Specify threads per processor limit

    To specify the maximum number of worker threads per processor that ASP can create, use the following syntax:

    **appcmd set config /section:asp /processorThreadMax:**int

    The variable int represents the maximum number of worker threads per processor that ASP can create. The default value is 25.

  • Specify default locale identifier

    To define how dates, times, and currencies are formatted for an ASP application, use the following syntax:

    **appcmd set config /section:asp /lcid:**int

    The variable int represents the default locale identifier for an ASP application. The default value is 0.

  • Enable or disable automatic application restart

    To enable or disable automatic restart of ASP applications whenever a configuration setting is changed, use the following syntax:

    appcmd set config /section:asp /enableApplicationRestart:True|False

    True enables ASP applications to be automatically restarted whenever a configuration setting is changed. The default value is True.

  • Enable or disable line number calculation

    To enable or disable ASP to calculate and store the line number of each executed line of code to provide the number in an error report, use the following syntax:

    appcmd set config /section:asp /calLineNumber:True|False

    True enables line number calculation and storage. The default value is True.

  • Enable or disable COM component exception trapping

    To enable or disable ASP pages to catch exceptions thrown by COM components, use the following syntax:

    appcmd set config /section:asp /exceptionCatchEnable:True|False

    True enables COM component exception trapping. If set to False, the Microsoft Script Debugger tool does not catch exceptions sent by the component that you are debugging. The default value is True.

  • Enable or disable client-side debugging

    To enable or disable client-side debugging, use the following syntax:

    appcmd set config /section:asp /appAllowClientDebug:True|False

    True enables client-side debugging. The default value is False.

  • Enable or disable log error requests

    To enable or disable the writing of ASP errors to the application section of the Windows event log, use the following syntax:

    appcmd set config /section:asp /logErrorRequests:True|False

    True enables log error requests. By default, ASP errors are written to the client browser and the IIS logs. The default value is True.

  • Enable or disable server-side debugging

  • Enable or disable Windows event logging of ASP errors

    To enable or disable ASP debugging on the server, use the following syntax:

    appcmd set config /section:asp /appAllowDebugging:True|False

    True enables server-side debugging for ASP applications. The default value is False.

  • Run On End Functions Anonymously

    To enable or disable SessionOnEnd and ApplicationOnEnd global ASP functions to run as the anonymous user, use the following syntax:

    appcmd set config /section:asp /runOnEndAnonymously:True|False

    True enables SessionOnEnd and ApplicationOnEnd global ASP functions to run as the anonymous user. The default value is True.

  • Specify script error message

    To specify the error message to send to the browser if specific debugging errors are not sent to the client, use the following syntax:

    **appcmd set config /section:asp /scriptErrorMessage:**string

    The variable string represents the error message that is sent to the browser when specific debugging errors are not sent to the client. The default value is "An error occurred on the server when processing the URL. Please contact the system administrator".

  • Enable or disable sending errors to the browser

    To enable or disable the writing of debugging specifics (file name, error, line number, and description) to the client browser in addition to logging them to the Windows event log, use the following syntax:

    appcmd set config /section:asp /scriptErrorSentToBrowser:True|False

    True enables the writing of debugging specifics to the client browser. The default value is False.

  • Specify default script language

    To specify the default script language for all ASP applications that are running on the web server, use the following syntax:

    **appcmd set config /section:asp /scriptLanguage:**string

    The variable string represents the default script language. The default value is VBScript.

  • Specify cache directory path

    To specify the name of the directory where ASP stores compiled ASP templates when the in-memory cache overflows, use the following syntax:

    **appcmd set config /section:asp /diskTemplateCacheDirectory:**string

    The variable string represents the cache directory path. The default value is %windir%\system32\inetsrv\ASP Compiled Templates.

  • Enable or disable type library caching

    To enable or disable the caching of type libraries, use the following syntax:

    appcmd set config /section:asp /enableTypelibCache:True|False

    True enables the caching of type libraries. The default value is True.

  • Set maximum number of compiled ASP templates to store

    To set the maximum number of compiled ASP templates that can be stored, use the following syntax:

    **appcmd set config /section:asp /maxDiskTemplateCacheFiles:**int

    The variable int represents the maximum number of compiled ASP templates to store. The default value is 2000.

  • Set maximum number of compiled ASP templates to store

    To set the maximum number of precompiled script files to cache, use the following syntax:

    **appcmd set config /section:asp /scriptFileCacheSize:**int

    The variable int represents the number of precompiled script files to cache. If set to 0, no script files are cached. If set to 4294967295, all requested script files are cached. The default value is 500.

  • Set maximum number of scripting engines to cache

    To set the maximum number of scripting engines that ASP pages keep cached in memory, use the following syntax:

    **appcmd set config /section:asp /scriptEngineCacheMax:**int

    The variable int represents the maximum number of scripting engines that are cached. The default value is 250.

  • Enable or disable COM+ side-by-side assemblies

    To enable or disable side-by-side COM+ assemblies, which allow ASP applications to specify which version of a system DLL or classic COM component to use, use the following syntax:

    appcmd set config /section:asp /appServiceFlags:True|False

    True enables COM+ side-by-side assemblies. The default value is False.

  • Enable or disable COM+ tracker

    To enable or disable COM+ tracker, use the following syntax:

    appcmd set config /section:asp /enableTypelibCache:True|False

    True enables COM+ tracker, which lets administrators or developers debug ASP applications. The default value is False.

  • Enable or disable multithreaded environments

    To enable or disable ASP to run in a multithreaded environment, use the following syntax:

    appcmd set config /section:asp /executeInMta:True|False

    True enables ASP to run in a multithreaded environment. The default value is False.

  • Enable or disable thread model checking

    To enable or disable whether IIS checks the threading model of any component that your application creates, use the following syntax:

    appcmd set config /section:asp /trackThreadingModel:True|False

    True enables thread model checking. The default value is False.

  • Specify COM+ partition ID

    To specify the Globally Unique Identifier (GUID) of the COM+ partition, use the following syntax:

    **appcmd set config /section:asp /partitionID:**string

    The variable string represents the GUID of the COM+ partition. The default value is 00000000-0000-0000-0000-000000000000.

    Note

    You must also set the appServiceFlags flag to True.

  • Specify COM+ application

    To specify the name of the COM+ application, use the following syntax:

    **appcmd set config /section:asp /sxsName:**string

    The variable string represents name of the COM+ application.

    Note

    You must also set the appSeviceFlags flag to True.

  • Enable or disable COM+ partitioning

    To enable or disable COM+ partitioning, use the following syntax:

    appcmd set config /section:asp /appServiceFlags:True|False

    True enables COM+ partitioning, which can be used to isolate applications in their own COM+ partition. The default value is False.

    Note

    If set to True, you must also set a value for the partitionID property.

  • Enable or disable session state

    To enable or disable session state persistence for an ASP application, use the following syntax:

    appcmd set config /section:asp /allowSessionState:True|False

    True enables session state persistence. The default value is True.

  • Set maximum number of concurrent sessions

    To set the maximum number of concurrent sessions that ASP allows, use the following syntax:

    **appcmd set config /section:asp /max:**int

    The variable int represents the maximum number of concurrent sessions. The default value is -1.

  • Enable or disable secure session ID

    To enable or disable the sending of a session ID as a secure cookie if assigned over a secure session channel, use the following syntax:

    appcmd set config /section:asp /keepSessionIdSecure:True|False

    True enables secure session ID. The default value is True.

  • Set session time-out

    To specify the default time that a session object is maintained after the last request associated with the object is made, use the following syntax:

    **appcmd set config /section:asp /timeout:**timeSpan

    The variable timeSpan represents the maximum time (hh:mm:ss) that a session object is maintained after the last request associated with the object is made. The default value is 00:20:00.

Next Steps

Test your website thoroughly to ensure that it functions as expected. Then consider configuring the following features.

See also