Add-BgpPeer
Add-BgpPeer
Adds a BGP peer to the current router.
구문
Parameter Set: Add0
Add-BgpPeer [-Name] <String> -LocalIPAddress <IPAddress> -PeerASN <UInt32> -PeerIPAddress <IPAddress> [-AsJob] [-CimSession <CimSession[]> ] [-HoldTimeSec <UInt16> ] [-IdleHoldTimeSec <UInt16> ] [-LocalASN <UInt32> ] [-MaxAllowedPrefix <UInt32> ] [-OperationMode <OperationMode> ] [-PassThru] [-PeeringMode <PeeringMode> ] [-RoutingDomain <String> ] [-ThrottleLimit <Int32> ] [-Weight <UInt16> ] [ <CommonParameters>]
자세한 설명
The Add-BgpPeer cmdlet adds a Border Gateway Protocol (BGP) peer to the current router. Specify the following values for the peer:
-- A name for the peer router
-- IP address that the router uses with the peer
-- Autonomous system number (ASN) for the peer router
You can also specify the following values:
-- ASN for the local router
-- Maximum number of network prefixes that the local router instance can learn from this peer
-- Preference assigned to routes received from this peer
-- Operation mode and peering mode
-- Hold time, in seconds
Exchange of route information begins when the peering session begins. If the peering mode is Automatic, the session begins when you add the peer. If you specify a value of Manual for the PeeringMode parameter, use the Start-BgpPeer cmdlet to start the peer session.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-HoldTimeSec<UInt16>
Specifies the hold time, in seconds. If this computer does not receive any messages from the peer within this period, the session expires.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
180 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-IdleHoldTimeSec<UInt16>
Specifies the time in seconds for which the BGP Peer stays in an idle state after an unsuccessful peer connection attempt.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-LocalASN<UInt32>
Specifies the ASN for the local router.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-LocalIPAddress<IPAddress>
Specifies the IP address that the local router uses for the peer connection.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-MaxAllowedPrefix<UInt32>
Specifies the maximum number of network prefixes that this router learns from its peer.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies a name. Provide a unique name for this peer within the routing domain.
별칭 |
PeerName,PeerId |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-OperationMode<OperationMode>
Specifies the BGP router mode of operation. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Mixed. The peer both initiates and accepts requests.
-- Server. The peer only accepts requests.
The default value is Mixed.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PeerASN<UInt32>
Specifies the ASN for the peer.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PeeringMode<PeeringMode>
Specifies the peering mode for the peer. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Automatic. Starts peering attempts automatically when added.
-- Manual. Starts peering attempts after you start the session by using the Start-BgpPeer cmdlet.
The default value is Automatic.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PeerIPAddress<IPAddress>
Specifies the IP address of the peer.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-RoutingDomain<String>
Specifies the name of the routing domain as a string. The name is a unique, for the multi-tenant gateway, user-defined alphanumeric string.
별칭 |
RoutingDomainName |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Weight<UInt16>
Specifies the preference, as an integer, assigned to routes received from this peer. Higher values have higher priority. The default value is 32768.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.Management.Infrastructure.CimInstance#BgpPeerConfig
예제
Example 1: Add a peer
This command adds a BGP peer, named TenantSite22, to the router. The command specifies the IP addresses for the router and the peer, and the peer ASN. The command selects the default value of Automatic for the peering mode. The command includes the PassThru parameter, so it passes the new object to the console.
PS C:\> Add-BgpPeer -Name "TenantSite22" -LocalIPAddress 192.168.1.10 -PeerASN 64512 -PeerIPAddress 10.1.1.10 -PassThru
Example 2: Add a peer that uses manual peering mode
This command adds a BGP peer, named TenantSite24, to the router. The command specifies the IP addresses for the router and the peer, and the peer ASN. The command specifies the PeeringMode and OperationsMode parameters. Because the command specifies a value of Manual for the PeeringMode parameter, the router drops incoming connections until you start the peering. The command includes the PassThru parameter, so it passes the new object to the console.
PS C:\> Add-BgpPeer -Name "TenantSite23" -LocalIPAddress 192.168.1.10 -PeerASN 64512 -PeerIPAddress 10.1.1.10 -OperationMode Server -PassThru -PeeringMode Manual
Example 3: Add a peer and specify a routing domain
This command adds a BGP peer, named Tenant19, to the router. The command specifies the IP addresses for the router and the peer, and the peer ASN. The command also specifies the routing domain as RD001. The command includes the PassThru parameter, so it passes the new object to the console.
PS C:\> Add-BgpPeer -Name "Tenant19" -LocalIPAddress 10.1.1.10 -PeerASN 64513 -PeerIPAddress 192.168.1.2 -PassThru -RoutingDomain "RD001"