Set-NlbClusterPortRule
Set-NlbClusterPortRule
Edits the port rules for a Network Load Balancing (NLB) cluster.
구문
Parameter Set: NonPipeline
Set-NlbClusterPortRule [[-Port] <UInt32> ] [-HostName <String> ] [-InterfaceName <String> ] [-IP <IPAddress> ] [-NewAffinity <PortRuleAffinity> {Network | None | Single} ] [-NewEndPort <Int32> ] [-NewIP <IPAddress> ] [-NewMode <PortRuleFilteringMode> {Disabled | Multiple | Single} ] [-NewProtocol <PortRuleProtocol> {Both | Tcp | Udp} ] [-NewStartPort <Int32> ] [-NewTimeout <UInt32> ] [ <CommonParameters>]
Parameter Set: Pipeline
Set-NlbClusterPortRule -InputObject <PortRule[]> [-NewAffinity <PortRuleAffinity> {Network | None | Single} ] [-NewEndPort <Int32> ] [-NewIP <IPAddress> ] [-NewMode <PortRuleFilteringMode> {Disabled | Multiple | Single} ] [-NewProtocol <PortRuleProtocol> {Both | Tcp | Udp} ] [-NewStartPort <Int32> ] [-NewTimeout <UInt32> ] [ <CommonParameters>]
자세한 설명
The Set-NlbClusterPortRule cmdlet edits the port rules for a Network Load Balancing (NLB) cluster. The port rule configuration you can edit includes the cluster IP address, port range, protocols, filtering mode, affinity, load weight, handling priority, and timeout.
This operation changes the configuration on all cluster nodes. As a result, the NLB cluster will have to restart the convergence process on all nodes to guarantee that configuration changes have been applied on all nodes and that a consistent state is reached. Any additional operations on the NLB cluster should not be initiated until all cluster nodes have completed the convergence process and are back to the converged state.
매개 변수
-HostName<String>
Specifies the name of the cluster host against which this cmdlet is run. If this parameter is omitted or a value of .
is entered, then the local cluster is assumed.
별칭 |
Host,HN,H |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IP<IPAddress>
Specifies the IP address for the cluster port rule to set.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InputObject<PortRule[]>
Specifies the cluster port rule to set.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InterfaceName<String>
Specifies the interface to which NLB is bound. This is the interface of the cluster against which this cmdlet is run.
별칭 |
Interface,IN,I |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewAffinity<PortRuleAffinity>
Specifies the new affinity for the cluster port rule. 이 매개 변수에 허용되는 값은 다음과 같습니다. Network, None, and Single.
별칭 |
NA |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewEndPort<Int32>
Specifies the new end port for the cluster port rule. 이 매개 변수에 허용되는 값은 다음과 같습니다. 0
through 65535
.
별칭 |
NEP |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewIP<IPAddress>
Specifies the new IP address for the cluster port rule.
별칭 |
NIP |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewMode<PortRuleFilteringMode>
Specifies a new mode for the cluster port rule. 이 매개 변수에 허용되는 값은 다음과 같습니다. Disabled, Multiple hosts, and Single host.
별칭 |
NM |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewProtocol<PortRuleProtocol>
Specifies the new protocol for the cluster port rule. 이 매개 변수에 허용되는 값은 다음과 같습니다. Both, Tcp, and Udp.
별칭 |
NPRTCL |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewStartPort<Int32>
Specifies the new start port for the cluster port rule. 이 매개 변수에 허용되는 값은 다음과 같습니다. 0
through 65535
.
별칭 |
NSP |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewTimeout<UInt32>
Specifies the new timeout in minutes for the cluster port rule. 이 매개 변수에 허용되는 값은 다음과 같습니다. 0
through 240
.
별칭 |
Timeout,T |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Port<UInt32>
Specifies a port number within the port rule to set. 이 매개 변수에 허용되는 값은 다음과 같습니다. 0
through 65535
.
별칭 |
P |
필수 여부 |
false |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.PortRule
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.NetworkLoadBalancingClusters.PowerShell.PortRule
예제
EXAMPLE 1
This example changes the start port of the port rule of port number 80 to 5.
PS C:\> Get-NlbClusterPortRule -Port 80 | Set-NlbClusterPortRule -NewStartPort 5
EXAMPLE 2
This command changes the protocol of the port rule of port number 80 to TCP.
PS C:\> Get-NlbClusterPortRule -Port 80 | Set-NlbClusterPortRule -NewProtocol Tcp
EXAMPLE 3
This example changes the port rule mode to Single.
PS C:\> Get-NlbClusterPortRule 80 | Set-NlbClusterPortRule -NewMode Single