Set-DAOtpAuthentication
Set-DAOtpAuthentication
Configures one-time password (OTP) authentication settings for DirectAccess (DA).
구문
Parameter Set: Set3
Set-DAOtpAuthentication [-AsJob] [-CAServer <String[]> ] [-CertificateTemplateName <String> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-DisableTwoFactorBypass] [-PassThru] [-SigningCertificateTemplateName <String> ] [-ThrottleLimit <Int32> ] [-UserSecurityGroupName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-DAOtpAuthentication cmdlet modifies the DirectAccess (DA) one-time password (OTP) settings, including certification authority (CA) servers, the certificate template used to issue one-time password (OTP) certificates, and users exempt from two-factor authentication.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CAServer<String[]>
Specifies the CA servers that issue certificates for OTP authentication.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CertificateTemplateName<String>
Specifies the name of the certificate template used for OTP.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the IPv4 or IPv6 address, or host name, of the server on which the cmdlet should run.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DisableTwoFactorBypass
Disables the option to allow users in a specific security group to be exempt from two-factor authentication, when two-factor authentication is enabled.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SigningCertificateTemplateName<String>
Specifies the name of the certificate template used to enroll the certificate used by Remote Access to sign certificates used for OTP authentication.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-UserSecurityGroupName<String>
Specifies a security group containing users who are exempt from two-factor authentication.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- None
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
Microsoft.Management.Infrastructure.CimInstance#DAOtpAuth
Microsoft.Management.Infrastructure.CimInstance
개체는 WMI(Windows Management Instrumentation) 개체를 표시하는 래퍼 클래스입니다. 파운드 기호(#
) 뒤에 오는 경로는 기본 WMI 개체의 네임스페이스 및 클래스 이름을 제공합니다.
The DAOtpAuth object contains the following OTP authentication configuration settings for DirectAccess:
-- OtpStatus specifies whether OTP authentication is enabled or disabled.
-- RadiusServer specifies the OTP RADIUS server names and addresses.
-- UserSecurityGroupName specifies the security group of users that are exempt from two-factor authentication.
-- CAServer specifies the CA servers used for OTP authentication.
-- CertificateTemplateName specifies the name of the OTP certificate template.
-- SigningCertificateTemplateName specifies the name of the certificate template used to enroll the certificate used by Remote Access to sign certificates used for OTP authentication.
예제
EXAMPLE 1
This example changes OTP setting for both DC1.corp.contoso.com\corp-DC1-CA and DC2.corp.contoso.com\corp-DC2-CA CA server to be used for OTP authentication. Other OTP settings will not be changed in any way. This cmdlet can be used to change single or multiple OTP settings.
Note: This cmdlet will fail if OTP authentication is Disabled.
PS C:\> Set-DAOtpAuthentication -CAServer @(DC1.corp.contoso.com\corp-DC1-CA, DC2.corp.contoso.com\corp-DC2-CA) –PassThru
EXAMPLE 2
This example enables two-factor authentication exemption feature and sets CORP\DirectAccessUsernamePasswordUsers as security group of users who are allowed to use username and password as user authentication for DA.
The appropriate user group should be created in advance before DA admin can configure OTP for DA. A DA administrator cannot add users to this group via the DA administrator console.
PS C:\> Set-DAOtpAuthentication -UserSecuriotyGroupName corp\DirectAccessUsernamePasswordUsers –PassThru
EXAMPLE 3
This example disables two-factor user authentication exemption feature and all DA users must use two-factor authentication such as Smart Card or OTP, as user authentication for DA. The value of the UserSecurityGroupName parameter is cleared and next time two-factor authentication feature is Enabled again, the DA administrator will have to supply the name of user security group.
PS C:\> Set-DAOtpAuthentication –DisableTwoFactorBypass –PassThru