Set-DnsServerRecursion
Set-DnsServerRecursion
Modifies recursion settings for a DNS server.
구문
Parameter Set: Set1
Set-DnsServerRecursion [-AdditionalTimeout <UInt32> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Enable <Boolean> ] [-PassThru] [-RetryInterval <UInt32> ] [-SecureResponse <Boolean> ] [-ThrottleLimit <Int32> ] [-Timeout <UInt32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-DnsServerRecursion cmdlet modifies recursion settings for a Domain Name System (DNS) server. Recursion occurs when a DNS server queries other DNS servers on behalf of a requesting client, and then sends the answer back to the client.
매개 변수
-AdditionalTimeout<UInt32>
Specifies the time interval, in seconds, that a DNS server waits as it uses recursion to get resource records from a remote DNS server. We recommend that you limit the value to the range 0x00000000 to 0x0000000F (0 seconds to 15 seconds), inclusive. However, you can use any value. We recommend that you set the default value to 4.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies a DNS server. 이 매개 변수에 허용되는 값은 다음과 같습니다. an IPv4 address; an IPv6 address; and any other value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Enable<Boolean>
Enables or disables recursion.
별칭 |
EnableRecursion |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RetryInterval<UInt32>
Specifies elapsed seconds before a DNS server retries a recursive lookup. If the parameter is undefined or zero, the DNS server retries after three seconds. Valid values are in the range of 1 second to 15 seconds.
We recommend that in general, you do not change the value of this parameter. However, under a few circumstances you should consider changing the parameter value. For example, if a DNS server contacts a remote DNS server over a slow link and retries the lookup before it gets a response, you can raise the retry interval to be slightly longer than the observed response time.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-SecureResponse<Boolean>
Indicates whether a DNS server screens DNS records against the zone of authority for the remote server, to prevent cache pollution. If you set this to $True, the DNS server caches only those records that are in the zone of authority for the queried remote server. Otherwise, the server caches all records in the remote server cache.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Timeout<UInt32>
Determines the number of seconds that a DNS server waits before it stops trying to contact a remote server. The valid value is in the range of 0x1 to 0xFFFFFFFF (1 second to 15 seconds). The default setting is 0xF (15 seconds). We recommend that you increase this value when recursion occurs over a slow link.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Set the retry interval
This command sets the retry interval to 3 seconds.
PS C:\> Set-DnsServerRecursion -RetryInterval 3 -PassThru