Set-DnsServerClientSubnet
업데이트 날짜: 2015년 5월
Set-DnsServerClientSubnet
Updates the IP addresses in a client subnet.
구문
Parameter Set: Set3
Set-DnsServerClientSubnet [-Name] <String> [-Action] <String> {ADD | REMOVE | REPLACE} [[-IPv4Subnet] <String[]> ] [[-IPv6Subnet] <String[]> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Set-DnsServerClientSubnet cmdlet updates the IP addresses in a client subnet on a Domain Name System (DNS) server. You can add, remove, or replace addresses. You can modify the IPv4 addresses, IPv6 addresses, or both kinds of addresses.
매개 변수
-Action<String>
Specifies whether to add to, remove, or replace the IP addresses in the client subnet. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- ADD
-- REMOVE
-- REPLACE
별칭 |
none |
필수 여부 |
true |
위치 |
3 |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies a remote DNS server. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IPv4Subnet<String[]>
Specifies an array IPv4 subnet addresses in Classless Interdomain Routing (CIDR) notation.
별칭 |
none |
필수 여부 |
false |
위치 |
4 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-IPv6Subnet<String[]>
Specifies an array IPv6 subnet addresses in CIDR notation.
별칭 |
none |
필수 여부 |
false |
위치 |
5 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies the name of the client subnet to modify.
별칭 |
none |
필수 여부 |
true |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
true(ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
- Microsoft.Management.Infrastructure.CimInstance#DnsServerClientSubnet
예
Example 1: Add an IPv4 address to a client subnet
The first command creates a client subnet named AsiaSubnet by using the Add-DnsServerClientSubnet cmdlet.
The second command adds an IPv4 subnet to the AsiaSubnet client subnet. The command uses the Format-List cmdlet to control the appearance of the output. For more information, type Get-Help Format-List
.
The command includes the PassThru parameter. The added IPv4 address appears in the computer output.
PS C:\> Add-DnsServerClientSubnet -Name "AsiaSubnet" -IPv6Subnet 0db8::1/28 -PassThru -IPv4Subnet 1.10.0.1/8
PS C:\> Set-DnsServerClientSubnet -Name "AsiaSubnet" -Action ADD -IPv4Subnet 192.168.0.4/16 -PassThru | Format-List
Example 2: Replace an IPv6 address in a client subnet
The first command creates a client subnet named AsiaSubnet that includes the IPv6 address 0db8::1/28.
The second command replaces the IPv6 addresses for the client subnet. The computer output includes the address 0db8::1/8 in place of 0db8::1/28.
PS C:\> Add-DnsServerClientSubnet -Name "AsiaSubnet" -IPv6Subnet 0db8::1/28 -PassThru -IPv4Subnet 10.0.0.1/8
PS C:\> Set-DnsServerClientSubnet -Name "AsiaSubnet" -Action REPLACE -IPv6Subnet 0db8::1/8 -PassThru | Format-List
Example 3: Remove an IPv4 address from a client subnet
The first command creates a client subnet named AsiaSubnet that includes both an IPv4 address and an IPv6 address.
The second command removes the IPv4 address. The computer output displays only the IPv6 address.
PS C:\> Add-DnsServerClientSubnet -Name "AsiaSubnet" -IPv6Subnet 0db8::1/28 -PassThru -IPv4Subnet 10.0.0.1/8
PS C:\> Set-DnsServerClientSubnet -Name "AsiaSubnet" -Action REMOVE -IPv4Subnet 10.0.0.1/8 -PassThru | Format-List