다음을 통해 공유


애플리케이션 수준 분할

적용 대상: SQL Server Azure SQL Database Azure SQL Managed Instance

이 애플리케이션은 주문을 처리합니다. 최근 주문에 대한 처리가 많이 있습니다. 이전 주문에 대한 처리가 많지 않습니다. 최근 주문은 메모리 최적화 테이블에 있습니다. 이전 주문은 디스크 기반 테이블에 있습니다. hotDate 이후의 모든 주문은 메모리 최적화 테이블에 있습니다. hotDate 이전의 모든 주문은 디스크 기반 테이블에 있습니다. 동시 트랜잭션이 많은 극단적인 OLTP 워크로드를 가정합니다. 여러 동시 트랜잭션이 hotDate를 변경하려고 하는 경우에도 이 비즈니스 규칙(메모리 최적화 테이블의 최근 주문)을 적용해야 합니다.

이 샘플에서는 디스크 기반 테이블에 분할된 테이블을 사용하지 않지만 세 번째 테이블을 사용하여 두 테이블 간의 명시적 분할 지점을 추적합니다. 분할 지점을 사용하여 새로 삽입된 데이터가 날짜에 따라 항상 적절한 테이블에 삽입되도록 할 수 있습니다. 데이터를 찾을 위치를 결정하는 데 사용할 수도 있습니다. 늦게 도착하는 데이터는 여전히 적절한 테이블로 이동합니다.

관련 샘플은 메모리 최적화 테이블을 분할하기 위한 애플리케이션 패턴을 참조하세요.

코드 목록

USE MASTER  
GO  
IF NOT EXISTS(SELECT name FROM sys.databases WHERE name = 'hkTest')  
  
CREATE DATABASE hkTest  
-- enable for In-Memory OLTP - change file path as needed  
ALTER DATABASE hkTest ADD FILEGROUP hkTest_mod CONTAINS MEMORY_OPTIMIZED_DATA  
ALTER DATABASE hkTest ADD FILE( NAME = 'hkTest_mod' , FILENAME = 'c:\data\hkTest_mod') TO FILEGROUP hkTest_mod;  
GO  
  
use hkTest  
go  
  
-- create memory-optimized table   
if OBJECT_ID(N'hot',N'U') IS NOT NULL  
   drop table [hot]  
  
create table hot   
   (id int not null primary key nonclustered,  
   orderDate datetime not null,  
   custName nvarchar(10) not null  
) with (memory_optimized=on)  
go  
  
-- create disk-based table for older order data  
if OBJECT_ID(N'cold',N'U') IS NOT NULL  
   drop table [cold]  
  
create table cold (  
   id int not null primary key,   
   orderDate datetime not null,   
   custName nvarchar(10) not null  
)  
go  
  
-- the hotDate is maintained in this memory-optimized table. The current hotDate is always the single date in this table  
if OBJECT_ID(N'hotDataSplit') IS NOT NULL  
   drop table [hotDataSplit]  
  
create table hotDataSplit (  
   hotDate datetime not null primary key nonclustered hash with (bucket_count = 1)  
) with (memory_optimized=on)  
go  
  
--  Stored Procedures  
--  set the hotDate  
--  snapshot: if any other transaction tries to update the hotDate, it will fail immediately due to a  
--  write/write conflict  
if OBJECT_ID(N'usp_hkSetHotDate') IS NOT NULL  
   drop procedure usp_hkSetHotDate  
go  
  
create procedure usp_hkSetHotDate @newDate datetime  
   with native_compilation, schemabinding, execute as owner  
   as begin atomic with  
   (  
      transaction isolation level = snapshot,  
      language = N'english'  
   )  
  
   delete from dbo.hotDataSplit  
   insert dbo.hotDataSplit values (@newDate)  
   end  
go  
  
-- extract data up to a certain date [presumably the new hotDate]  
-- must be serializable, because you don't want to delete rows that are not returned  
if OBJECT_ID(N'usp_hkExtractHotData') IS NOT NULL  
   drop procedure usp_hkExtractHotData  
go  
create procedure usp_hkExtractHotData @hotDate datetime  
   with native_compilation, schemabinding, execute as owner  
   as begin atomic with  
   (  
      transaction isolation level = serializable,  
      language = N'english'  
)  
   select id, orderDate, custName from dbo.hot where orderDate < @hotDate  
   delete from dbo.hot where orderDate < @hotDate  
end  
go  
  
-- insert order  
-- inserts an order either in recent or older table, depending on the current hotDate  
-- it is important that the SP for retrieving the hotDate is repeatableread, in order to ensure that  
-- the hotDate is not changed before the decision is made where to insert the order  
-- note that insert operations [in both disk-based and memory-optimized tables] are always fully isolated, so the transaction  
-- isolation level has no impact on the insert operations; this whole transaction is effectively repeatableread  
if OBJECT_ID(N'usp_InsertOrder') IS NOT NULL  
   drop procedure usp_InsertOrder  
go  
  
create procedure usp_InsertOrder(@id int, @orderDate date, @custName nvarchar(10))  
   as begin  
   SET TRANSACTION ISOLATION LEVEL READ COMMITTED  
   begin tran  
      -- get hot date under repeatableread isolation; this is to guarantee it does not change before the insert is executed  
      declare @hotDate datetime  
      set @hotDate = (select hotDate from hotDataSplit with (repeatableread))  
  
      if (@orderDate >= @hotDate) begin  
         insert into hot values (@id, @orderDate, @custName)  
      end  
      else begin  
         insert into cold values (@id, @orderDate, @custName)  
      end  
   commit tran  
end  
go  
  
-- change hot date  
-- changes the hotDate and moves the rows between the recent and older order tables as appropriate  
-- the hotDate is updated in this transaction; this means that if the hotDate is changed by another transaction  
--   the update will fail due to a write/write conflict and the transaction is rolled back  
--   therefore, the initial (snapshot) access of the hotDate is effectively repeatable read  
if OBJECT_ID(N'usp_ChangeHotDate') IS NOT NULL  
   drop procedure usp_ChangeHotDate  
go  
create procedure usp_ChangeHotDate(@newHotDate datetime)  
as  
begin  
   SET TRANSACTION ISOLATION LEVEL READ COMMITTED  
   begin tran  
       declare @oldHotDate datetime  
      set @oldHotDate = (select hotDate from hotDataSplit with (snapshot))  
  
       -- get hot date under repeatableread isolation; this is to guarantee it does not change before the insert is executed  
      if (@oldHotDate < @newHotDate) begin  
         insert into cold exec usp_hkExtractHotData @newHotDate  
      end  
      else begin  
         insert into hot select * from cold with (serializable) where orderDate >= @newHotDate  
         delete from cold with (serializable) where orderDate >= @newHotDate  
      end  
      exec usp_hkSetHotDate @newHotDate  
   commit tran  
end  
go  
  
--  Deploy and populate tables  
-- cleanup  
delete from cold  
go  
  
-- init hotDataSplit  
exec usp_hkSetHotDate '2012-1-1'   
go  
  
-- verify hotDate  
select * from hotDataSplit  
go  
  
EXEC usp_InsertOrder 1, '2011-11-14', 'cust1'  
EXEC usp_InsertOrder 2, '2012-3-4', 'cust1'  
EXEC usp_InsertOrder 3, '2011-1-23', 'cust1'  
EXEC usp_InsertOrder 4, '2011-8-6', 'cust1'  
EXEC usp_InsertOrder 5, '2010-11-1', 'cust1'  
EXEC usp_InsertOrder 6, '2012-1-9', 'cust1'  
EXEC usp_InsertOrder 7, '2012-2-14', 'cust1'  
EXEC usp_InsertOrder 8, '2010-1-17', 'cust1'  
EXEC usp_InsertOrder 9, '2012-3-8', 'cust1'  
EXEC usp_InsertOrder 10, '2011-9-24', 'cust1'  
go  
  
--  Demo Portion  
-- verify contents of the tables  
-- hotDate is 2012-1-1  
-- all orders from 2012 are in the recent table  
-- all orders before 2012 are in the older order table  
  
-- query hot data  
select * from hot order by orderDate desc  
  
-- query cold date  
select * from cold order by orderDate desc  
  
-- move hot date to Mar 2012  
EXEC usp_ChangeHotDate '2012-03-01'  
  
-- Verify that all orders before Mar 2012 were moved to older order table  
-- query hot data  
select * from hot order by orderDate desc  
  
-- query old data  
select * from cold order by orderDate desc  

참고 항목

메모리 내 OLTP 코드 샘플