XPS OM에 이미지 배치
XPS OM에 이미지를 배치하는 방법을 설명합니다.
XPS OM에 이미지를 배치하려면 이미지의 위치와 윤곽선을 정의하는 경로 개체를 만든 다음, 이미지 브러시를 사용하여 경로를 채웁니다. 만든 경로 개체를 다른 시각적 콘텐츠와 함께 렌더링할 수 있도록 페이지 또는 캔버스의 시각적 개체 목록에 추가합니다.
프로그램에서 이러한 코드 예제를 사용하기 전에 공통 XPS 문서 프로그래밍 작업의 고지 사항을 읽어 보세요.
코드 예
이미지 리소스 만들기
XPS OM에서 원본 이미지를 이미지 리소스로 사용할 수 없는 경우 먼저 이미지 리소스를 만듭니다.
HRESULT hr = S_OK;
IStreamPtr imageStream; // the resulting image stream
IOpcPartUri *imagePartUri;
IXpsOMImageResource *imageResource;
XPS_RECT rect = {0.0f, 0.0f, 0.0f, 0.0f}; // set to image size
hr = xpsFactory->CreateReadOnlyStreamOnFile (
imageFileName, &imageStream );
hr = xpsFactory->CreatePartUri( imagePartName, &imagePartUri );
imageType; // set to type of image being read in
hr = xpsFactory->CreateImageResource (
imageStream,
imageType,
imagePartUri,
&imageResource);
imagePartUri->Release();
imageStream->Release();
// imageResource can now be used by other parts in the XPS OM.
시각적 개체 컬렉션에 이미지 배치
원본 이미지를 이미지 리소스로 XPS OM에서 사용할 수 있는 경우 이미지 브러시 개체를 만들고 페이지의 이미지 위치 및 크기를 설명하는 경로에 채우기 브러시로 추가할 수 있습니다.
// These variables are initialized outside of this code example,
// for example, as the parameters of a method or from some
// preceding program code.
// dimensions of the image in pixels
XPS_SIZE bmpDim = {0,0} ;
// DPI resolution values obtained from image
FLOAT dpiX = 96.0f;
FLOAT dpiY = 96.0f;
// initialize viewport values
XPS_RECT viewPort = {0.0,0.0,0.0,0.0};
// initialize viewbox values
XPS_RECT viewBox = {0.0,0.0,0.0,0.0};
// These are part of this code example.
IXpsOMPath *imageRectPath;
IXpsOMImageBrush *imageBrush;
IXpsOMVisualCollection *pageVisuals;
// Describe image source dimensions and set viewbox to be the
// entire image DIP width of image.
// Example:
// 600 image pixels, 300 dpi -> 2 inches -> 2 * 96 = 192 DIP width
viewBox.width = FLOAT((double)bmpDim.width * 96.0 / dpiX);
viewBox.height = FLOAT((double)bmpDim.height * 96.0 / dpiY);
// Describe the size and position of the image destination.
// rect is an XPS_RECT structure that is initialized outside
// of this sample for example, it might be passed in as a parameter.
// destination rectangle
viewPort.x = rect.x;
viewPort.y = rect.y;
viewPort.width = rect.width;
viewPort.height = rect.height;
// Create the image brush.
hr = xpsFactory->CreateImageBrush(imageResource, &viewBox, &viewPort,
reinterpret_cast<IXpsOMImageBrush**>(&imageBrush));
// Create the path that describes the outline of the image on the page.
// This step uses the function described in the next code example.
hr = CreateRectanglePath(xpsFactory, &rect,
reinterpret_cast<IXpsOMPath**>(&imageRectPath));
// Set the accessibility description for the path object as required.
hr = imageRectPath->SetAccessibilityShortDescription( shortDescText );
// Set the image brush to be the fill brush for this path.
hr = imageRectPath->SetFillBrushLocal( imageBrush );
// Get the list of visuals for this page...
hr = xpsPage->GetVisuals( &pageVisuals );
// ...and add the completed path to the list.
hr = pageVisuals->Append( imageRectPath );
// Release locally created interfaces.
if (NULL != pageVisuals) pageVisuals->Release();
if (NULL != imageRectPath) imageRectPath->Release();
if (NULL != imageBrush) imageBrush->Release();
이미지에 대한 경로 개체 만들기
다음 메서드는 XPS_RECT 구조체를 허용하고 사각형 경로를 만듭니다.
HRESULT
CreateRectanglePath(
__in IXpsOMObjectFactory *xpsFactory,
__in const XPS_RECT *rect,
__out IXpsOMPath **rectPath
)
{
HRESULT hr = S_OK;
IXpsOMGeometryFigure *rectFigure;
IXpsOMGeometry *imageRectGeometry;
IXpsOMGeometryFigureCollection *geomFigureCollection;
// Define start point and three of the four sides of the rectangle.
// The fourth side is implied by setting the path type to CLOSED.
XPS_POINT startPoint = {rect->x, rect->y};
XPS_SEGMENT_TYPE segmentTypes[3] = {
XPS_SEGMENT_TYPE_LINE,
XPS_SEGMENT_TYPE_LINE,
XPS_SEGMENT_TYPE_LINE
};
FLOAT segmentData[6] = {
rect->x, rect->y+rect->height,
rect->x+rect->width, rect->y+rect->height,
rect->x+rect->width, rect->y
};
BOOL segmentStrokes[3] = {
TRUE, TRUE, TRUE
};
// Create a closed geometry figure using the three
// segments defined above.
hr = xpsFactory->CreateGeometryFigure( &startPoint, &rectFigure );
hr = rectFigure->SetIsClosed( TRUE );
hr = rectFigure->SetIsFilled( TRUE );
hr = rectFigure->SetSegments( 3, 6,
segmentTypes, segmentData, segmentStrokes );
// Create a geometry that consists of the figure created above.
hr = xpsFactory->CreateGeometry( &imageRectGeometry );
hr = imageRectGeometry->GetFigures( &geomFigureCollection );
hr = geomFigureCollection->Append( rectFigure );
// Create the path that consists of the geometry created above
// and return the pointer in the parameter passed in to the function.
hr = xpsFactory->CreatePath( reinterpret_cast<IXpsOMPath**>(rectPath) );
hr = (*rectPath)->SetGeometryLocal( imageRectGeometry );
// The calling method will release these interfaces when
// it is done with them.
return hr;
}
관련 항목
-
다음 단계
-
이 페이지에서 사용됨
-
상세 설명